SAS OFFSHORE STINGER MONITORING SYSTEM
Product information / Technical datasheets
1Rev1
- 21 -
Technical Data
Mechanical-electrical Shearpin Load Cell for roller boxes
Calibrated load sensor for integrated use within the stinger roller boxes.
Partnumber
Design
Measuring principle
Model/series
Rated Capacity
Proofload
Overload Rating
Shaft diameter
Overall length
Quality
Standard to
Mill certificate
Impact Toughness
Ingress Protection
Instrumentation
Load and serial indication
Sensing Element
Amplifier
Reverse polarity
Supply voltage
Signal output
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
Calibration
Electrical connection
:
:
Bridge “A”
:
Temperature Range
:
Fatigue life
:
212272-TFL-350kN-13xxxx
heavy duty shearpin type load cell
shear force
TFL-350kN-13xxxx
0...350 kN (nominal)
490 kN (140% of rated capacity)
490 kN (140% of capacity without calibration shift)
Ø 110 mm
364 mm
630 stainless steel / Condition HH1150
1.4542
EN10204/3.1 attest
Sharpy Impact 27 Joules Minimum @ -46⁰C
IP68 (up to 200 metres of sea water depth)
Internally gauged, filled with dielectric compound and o-ring sealed
Serial No & Load Direction arrow stamped on cable gland end face
Single full bridge strain gage
Integrated
Protected
18 - 30 Vdc
standard 4...20 mA
4 mA @ zero load
20 mA @ rated load
Output load max 1000 Ω
Calibrated to rated capacity using best fit straight line
Stainless socket outlet (series Metal Shell) designed for rugged
applications such as ROV and geophysical operations
Pin 1:
+Source: +24Vdc
Pin 2:
Signal:
4-20mA
Pin 3:
Common
Pin 4:
Common
Operating: -40 to 50⁰C.
Storage: -40 to 82⁰C.
Minimum of 500.000 cycles of rated capacity
Techno Fysica BV, Centre for Measurement Techniques.
Project: 212272
V1.0
0
