Ender 3 S1
Modification 1
Add Printer/
Adding a 3D printer in Cura is very simple. First, open the program and
select “Settings” from the top menu bar. Then click on “Printers” and
then “Add printer”. Open the drop-down menu and select “Custom FFF
printer”. Enter the name of your printer (in this case Ender 3 S1 Pro).
Click on “Add” and your printer will be added.
Next you need to define the printer properties under the machine
settings:
Cura Configuration Settings
Printer settings:
X (Width) = 220 mm
Y (Depth) = 220 mm
Z (Height) = 270 mm
Build plate shape = Rectangular
Origin at center = No
Heated bed = Yes
Printhead settings:
X min = -26 mm
Nozzle size = 0.4 mm
Y min = -32 mm
Compatible material diameter = 1.75 mm
X max = 32 mm
Nozzle offset X = 0.0 mm
Y max = 34 mm
Nozzle offset Y = 0.0 mm
Gantry Height = 25 mm
Cooling Fan Number = 0
Number of extruders = 1
After creating the profile, Cura will independently create standard
profiles for different accuracies. However, the values given by Cura
are unsuitable default values which you must still adapt to the Ender
3 S1 Pro.
Heated build volume = No
G-code flavor = Marlin
Nozzle Settings:
Apply Extruder offsets to
GCode = Yes
Cura Configuration Settings
(Creality Slicer 4.8)
Start GCODE :
End Gcode:
G28 ;Home
G91 ;Relative positionning
G1 E-2 F2700 ;Retract a bit
G92 E0 ;Reset Extruder
G1 Z2.0 F3000 ;Move Z Axis up
G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position
G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line
G1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little
G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line
G92 E0 ;Reset Extruder
G1 Z2.0 F3000 ;Move Z Axis up
G1 E-2 Z0.2 F2400 ;Retract and raise Z
G1 X5 Y5 F3000 ;Wipe out
G1 Z10 ;Raise Z more
G90 ;Absolute positionning
G1 X0 Y0 ;Present print
M106 S0 ;Turn-off fan
M104 S0 ;Turn-off hotend
M140 S0 ;Turn-off bed
M84 X Y E ;Disable all steppers but Z
0
