Product Data Sheet Edition 2011-10_1 Sarnafil® F-610-15 Sarnafil® F-610-15 Construction Polymeric sheet for roof waterproofing ® Product Description Sarnafil F-610-15 (thickness 1.5 mm) is a multi-layer, synthetic roof waterproofing sheet based on premium-quality polyvinyl chloride (PVC). Uses Waterproofing membrane for: Detailing in roof systems with: ® Sarnafil F-610 Felt types Roof waterproofing membrane for roof junction zones: Roof waterproofing for junctions and flashings, e.g. wall and parapet junctions, roof lights, etc. in installations of Sarnafil® roof waterproofing systems with: – mechanical fastening – adhered systems Product Data Form Packaging 20 (-0 / +5 %) m (length) x 2 (-0.5 / +1 %) m (width) (EN 1848-2) Storage Storage Conditions / Shelf-Life Unlimited shelf-life if stored horizontally on pallet (maximum five layers of rolls per pallet) in original, unopened and undamaged sealed packaging in dry conditions at temperatures not exceeding +45ºC and protected against direct sunlight, rainwater, snow, ice, acid, alkali, oils, organic solvents, etc. Technical Data Visible defects Pass (EN 1850-2) Straightness 50 mm (EN 1848-2) Flatness 10 mm (EN 1848-2) Effective Thickness 1.5 (-5 / +10 %) mm Mass per unit area 1.9 (-5 / +10 %) kg/m (EN 1849-2) 2 (EN 1849-2) Mechanical / Physical Properties Tensile Strength Elongation Longitudinal (MD*) and Transversal (CMD*): 12 N/mm2 (EN 12311-2) Longitudinal (MD*) and Transversal (CMD*): 250% (EN 12311-2) 1 Sarnafil® F-610-15 1/2 Construction Foldability at Low Temperature -25°C Dimension Stability Longitudinal (MD*) Transversal (CMD*) |2|% |1|% Resistance to Impact Hard substrate Soft substrate 300 mm 600 mm Water Tightness Pass Joint Peel Resistance 280 N/50 mm (EN 12316-2) Joint Shear Resistance 500 N/50 mm (EN 12317-2) Effects of Liquid Chemicals, Including Water On request Reaction to Fire E Hail Resistance Rigid substrate Flexible substrate UV Exposure Pass (> 1000 h) (EN 495-5) (EN 1107-2) (EN 12691) (EN 1928) (EN 1847) (EN ISO 11925-2 , classification after EN 13501-1) *MD = *CMD = 17 m/s 25 m/s (EN 13583) (EN 1297) machine direction cross machine direction Value Base All technical data stated in this Product Data Sheet are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control. Health and Safety Information For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Material Safety Data Sheet (available on request) containing physical, ecological, toxicological and other safety-related data. Legal Notes The information, and, in particular, the recommendations relating to the application and end-use of Sika products, are given in good faith based on Sika's current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with Sika’s recommendations. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of the product must test the product’s suitability for the intended application and purpose. Sika reserves the right to change the properties of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request. Sika Singapore Pte Ltd 200 Pandan Loop, 06-02 Pantech 21 Singapore 128388 SINGAPORE Phone: +65 6777 2811 Fax: +65 6779 6200 e-mail: [email protected] www.sika.com.sg Sika Kimia Sdn Bhd Lot 689 Nilai Industrial Estate 71800 Nilai, Negeri Sembilan DK MALAYSIA Phone: +606-7991762 Fax: +606-7991980 e-mail: [email protected] www.sika.com.my 2 Sarnafil® F-610-15 2/2