SJR MACHINERY CO.,LTD. www.machinery-china.com Universal Milling Machine X6232B,X6232x16 Universal Rotary Head Milling Machine (milling head rotates 360 in two directions) X6232C,X6232Cx16 Universal Rotary Head Milling Machine(45 rotary face) O O Standard Accessories Application of machine: Dividing head Rotary table Boring head Transmission box Milling chuck Machine vise etc X6232B Universal Rotary Head Milling Machine was transformed form X6132. It is added with overarm and an universal Milling head. It is drived by a single motor and form a single part. The Universal Milling head can be used as Milling head but also can be rotated 360 in two directions. Equipped with the spindle sleeve. It can stretch out and back, machine any angle oblique plane and hole. The difference between x6232C and X6232B is that X6232C has 45 rotary face, reducing parallel Vertical rotary, so that can machine any plane, groove and hole in any space and angle. MODEL 13302 13302-1 13303 13303-1 USM32B USM32C USM32 x 16 USM32C x 16 320 x 1320 Table area (width x length) mm 320 x 1320 320 x 1320 320 x 1600 T-slots (No.-width x pitch) mm 3-18x70 3-18x70 3-18x70 3-18x70 Table Travel (manual) X/Y/Z mm 700/255/320 700/255/320 700/255/320 700/255/320 Table travel (power) X/Y/Z mm 680/240/300 680/240/300 780/240/300 780/240/300 +450 +450 +450 +450 0 0 0 3600 Table Swivel degree Vertical Milling head swivel degree 360 360 360 Max weigh of workpiece kg 500 500 500 500 Spindle motor power (horizontal/vertical head) kw 5.5/3 5.5/3 5.5/3 5.5/3 7:24 50#/40# 7:24 50#/40# 18 30-1500/125-2000 7:24 50#/40# 7:24 50#/40# 18 30-1500/125-2000 18 23.5-1180/ 23.5-1180/8-394 2300/2300/770 Spindle taper (horizontal/vertical head) 18 30-1500/90-1400 18 23.5-1180/ 23.5-1180/8-394 18 23.5-1180/ 23.5-1180/8-394 18 30-1500/90-1400 18 23.5-1180/ 23.5-1180/8-394 mm/min 2300/2300/770 2300/2300/770 2300/2300/770 Distance from center line of horizontal spindle to table surface mm 30-350 30-350 30-350 30-350 Distance from vertical spindle nose to table surface mm 40-425 250-570 40-425 250-570 Feed motor power kw 1.5 1.5 1.5 1.5 DRO Resoluction (DRO milling machine only) mm 0.005 0.005 Machine dimensions (L x W x H) mm 2294x1770x1858 2294x1770x1858 2294x2045x1858 2294x2045x1858 Weight of machine (about) kg 3000 3000 3000 3000 X6232B X6232B/1 X6232C X6232C/1 X6232 x 16 X6232C x 16 Spindle speed range (horizontal/vertical head) r/min Feed speed (X/Y/Z) mm/min Rapid speed (X/Y/Z) Old model 78
