remanit 4404 modificado

REMANIT 4404
DIN Equivalences: X 2 Cr Ni Mo 17 13 2
W.N.:1.4404
AISI: 316 L
Chemical composition
%C
%Cr
16.50
18.50
≤0.03
State of supply
Hardness of supply
Identification colors
Format
% Ni
11.00
14.00
%Mo
2.00
2.50
Annealed
200 HB max.
Purple – Red (Letter L color white)
Round bars and plates
Properties
Resistant to acids with lowering resistance effects with sulfuric acid and hydrochloric acid, it can cause pitting and
stress corrosion.
Good resistance to intercrystalline corrosion up to 400 º C and surface corrosion.
For a best anticorrosive effect it is recommended to polish (mirror.effect)
Easy machining and inlaying.
Steel of greater weldability than Remanit 4401 due to its low carbon percentage.
Applications
In the pharmaceutical industry.
Production of artificial textile fibers and obtain from carbon derivatives.
For tanks, pipes, fittings in the chemical industry, such as paper and pulp mills.
Photography industry, textile dry cleaners of high chemical demand.
Medical and surgical instruments.
Manufacturing of fruit juices, liqueurs and alcohol and where there should be no influence on taste.
Mechanical Properties
Range of dimensions
Elastic Limit 0,2%
2
(Rp 0,2) min. N/mm
Tensile strength
2
(Rm) N/mm
Elongation
(A5) min. %
Cold rolled e≤ 6 mm
Cold rolled e≤ 12 mm
≥240
≥200
530 – 680
≥40
Variable Temperature
Temperature ºC
Elastic Limit 0,2%
(Rp 0,2) min. N/mm2
50
100
150
200
250
300
350
400
450
500
550
182
166
152
137
127
118
113
108
103
100
98
Welding
Very good weldability. Classic recommendations for welding 2010NiMo stainless steel.
It is preferably recommended using: BW ELC SS (for joint) and there are other alternatives in TIG and MIG
process. Any queries, please contact the Technical Department of SOLDEX S.A.
LIMA: Av. Oscar R. Benavides (ex Colonial) N° 1244 - 1260, Lima / Call Center: 719 8989 Extensions: 146 / 141 / Telefax:
7188222 / E-mail: [email protected] AREQUIPA: Calle Lambayeque N° 105 Mariano Melgar, Arequipa Telephone: 054450050 / Telefax: 054-454040 E-mail: [email protected] / Web Site: www.acerosdelperu.pe
Temperature Effect on the mechanical properties
Where:
Rm: Tensile Strength
Rp0.2: Creep Strength
A : Reduction of Area
Machining Recommendations
Turning
Turning with carbide
Rough
Fine Turning
Turning
Cutting Parameters
Cutting speed (cs) m/min
Feed (f) mm/r
Depth of cut (ap) mm.
ISO
Machining Group
Turning with high speed steel
Fine Turning
170 – 145
160 – 200
25 – 45
0,2 - 0,4
0,1 - 0,2
0,1 - 0,5
1–4
0,5 – 1
0,5 – 3
M20-M30
M10
-
Milling with carbide
Cutting Parameters
Milling with carbide
Rough milling
60 – 120
0,2 - 0,3
≤4
M20 – M30
Cutting speed (cs) m/min
Feed (fz) mm/tooth
Depth of cut (ap) mm.
ISO Machining Group
Fine milling
100 – 155
0,2
≤0,6
M10
Drilling with HSS bit
Diameter
Cutting speed (vc)
m/min.
Feed (f) mm/r
20
30
40
200
200
200
0,01
0,12
0,15
LIMA: Av. Oscar R. Benavides (ex Colonial) N° 1244 - 1260, Lima / Call Center: 719 8989 Extensions: 146 / 141 / Telefax:
7188222 / E-mail: [email protected] AREQUIPA: Calle Lambayeque N° 105 Mariano Melgar, Arequipa Telephone: 054450050 / Telefax: 054-454040 E-mail: [email protected] / Web Site: www.acerosdelperu.pe