Handle Blocking Device MD / ND / PD / RD NG / PG MG 2 MG

s
Item:
Handle Blocking Device
HBDM
HBDP
MN6BL
Marco de protección para puertas (para accionamiento giratorio Frontal/Operadores)
Cadre pour découpe de porte
For Use With Frame
MG, NG, PG
Para Usar Con Caja Base MD, ND, PD, RD
Installation Instructions / Instructivo de Instalación
Hazardous Voltage.
Will cause death or serious injury.
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Turn off and lock out all power supplying this device before Desenergice totalmente antes de instalar o darle servicio.
working on this device.
Reemplace todas las barreras y cubiertas antes de
Replace all covers before power supplying this device is
energizar el interruptor.
turned on.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté.
Use only with Siemens certified Components.
Utilizar únicamente con componentes certificados de Siemens.
A utiliser uniquement avec les composants certifiés Siemens.
MG
MD / ND / PD / RD
NG / PG
HBDM
HBDP /
MN6BL
MG
1
Option – ON / I
[ Opción – ON / I ]
2
Option – OFF / O
1
[ Opción – OFF / O ]
2
1/2
8 0 6 9 1 4 A 0 0
MD / ND / PD / RD
NG / PG
Option – OFF / O
[ Opción – OFF / O ]
1
2
10-32UNC X .38
2 Lb. in.
[ .2 Nm ]
2
Option – ON / I
[ Opción – ON / I ]
1
b
a
3
10-32UNC X .38
2 Lb. in.
[ .2 Nm ]
Technical Support:
Subject to change without prior notice
Siemens Energy & Automation Inc. , Alpharetta, GA U.S.A.
.09 [ 2.29mm ]
Toll Free: 1-800-964-4114
2/2
.09 [ 2.29mm ]
Internet: www.sea.siemens.com
© Siemens Energy & Automation Inc. 2004
806914A00