Manual Instructions for SAP Note 1921566

Manual Instructions for SAP Note 1921566
CRT2: Corrections for new XML file
"Procedimientos de ERE”
Version 1
MANUAL INSTRUCTIONS
TABLE OF CONTENTS
1
CHANGES TO BADI INTERFACE ................................................................................................... 3
2
MANUAL INSTRUCTIONS
To perform the following changes, please, log on to the system in ES language.
1
CHANGES TO BADI INTERFACE
1.1
In transaction SE18, edit the HR_ES_CRT2 BADI.
1.2
Double click on the BADI_HR_ES_CRT2 interface.
1.3
Enter the following methods:
Method
Description
Class
APPLY_PERE_RULES
Instance Method
Aplica reglas al Procedimiento de ERE
SET_COMPANY_DATA
Instance Method
Modificar datos de la empresa
SET_PERE_CENTRO_TRAB_AFECT
Instance Method
Modificar datos del centro de trabajo afectado
SET_PERE_DATOS_PROC
Instance Method
Modificar datos del procedimiento
SET_PERE_PSUR_DATA
Instance Method
Modificar datos del período de suspensión o
reducción
1.4
For the method APPLY_PERE_RULES, insert the following parameters:
Parameters
1.5
1.6
Reference Type
CS_PERNR_SEDAT
Changing
PESC2_PERNR_SEDAT_TYPE
CS_COMPANY_DATA
Changing
PESC2_CRT2_COMPANY_DATA
For the method SET_COMPANY_DATA, insert the following parameters:
Parameters
Class
CS_COMPANY_DATA
Changing
Reference Type
PESC2_CRT2_COMPANY_DATA
For the method SET_PERE_CENTRO_TRAB_AFECT, insert the following parameters:
Parameters
CS_PERNR_SEDAT
1.7
Class
Class
Changing
Reference Type
PESC2_PERNR_SEDAT_TYPE
For the method SET_PERE_DATOS_PROC, insert the following parameters:
Parameters
Class
Reference Type
IS_PERNR_SEDAT
Importing
PESC2_PERNR_SEDAT_TYPE
CS_COMPANY_DATA
Changing
PESC2_CRT2_COMPANY_DATA
3
MANUAL INSTRUCTIONS
1.8
For the method SET_PERE_PSUR_DATA, insert the following parameters:
Parameters
CS_PERNR_SEDAT
1.9
Class
Changing
Reference Type
PESC2_PERNR_SEDAT_TYPE
Save and activate your entries
4
www.sap.com
service.sap.com/note-assistant
© 2013 SAP AG or an SAP affiliate company. All rights reserved.
No part of this publication may be reproduced or transmitted in any
form or for any purpose without the express permission of SAP AG.
The information contained herein may be changed without prior notice.
Some software products marketed by SAP AG and its distributors contain
proprietary software components of other software vendors. National product
specifications may vary.
These materials are provided by SAP AG and its affiliated companies (“SAP
Group”) for informational purposes only, without representation or warranty of
any kind, and SAP Group shall not be liable for errors or omissions with
respect to the materials. The only warranties for SAP Group products and
services are those that are set forth in the express warranty statements
accompanying such products and services, if any. Nothing herein should be
construed as constituting an additional warranty.
SAP and other SAP products and services mentioned herein as well as their
respective logos are trademarks or registered trademarks of SAP AG in
Germany and other countries.
Please see
http://www.sap.com/corporate-en/legal/copyright/index.epx#trademark
for additional trademark information and notices.