packaging with drop-down opening

Dear Sirs;
We take this opportunity to introduce the new packaging with closure and opening drop.
“PACKAGING WITH DROP-DOWN OPENING”
This new design is a packaging with drop shaped dispenser opening, for automatic packaging of bulk
material, powder and liquids, such as detergents, food products and related products.
This new device comes out from the same packaging and is formed by several slits tab located in the
central and upper closing flaps of the box, which can be withdrawn to its initial position and leaving the
box fully closed.
INITIAL POSITION
DISPENSER / DISPENSING CONTAINER
FINAL POSITION OR CLOSURE
Improvements of this new industrial design:
The dispenser comes from the laminar body.
It can be stored correctly, since the dispenser is integrated in the container, without forming any
outbound.
The packaging does not bear ripper tape for opening.
The volume of the inner product can match the volume of the packaging because the opening is
located at the top. Currently the openings are located on the narrow sides of the packaging and,
therefore, the product volume is smaller than the container volume.
The dispenser being located in its upper part visually facilitates the correct dosage of the product
(quantity).
Once opened, the closure is effective.
This dispenser does not affect the technical characteristics of the container. (Compression resistance,
machinability)
Once opened, printing of the container is not sliced or ripped.
It does not require dispenser cup inside the container.
This package also allows placing a handle for better handling.
This dispenser allows dispensing the product without touching it, avoiding possible allergies or infections
caused by the contact.
Its closing prevents product loss and aroma once opened.
Easy to open and close.
A thanks to its closure, there is no moisture penetration and prevents lumps forming.
Once opened, the package is easy to use thanks to its verticality.
The packaging is safer for children because it does not remain open.
With this dispenser, we improve security with rivets, since the consumer has no contact with the inside of
the folding box.
The volume of the container is adapted to customer requirements.
The closure of the bottom can be short flap, long flap, etc.
The faces or sides of the packaging may contain a window of different sizes that allows seeing the
product and how much is left.
METHOD OF USE
IMAGES
DOCUMENTS
OFICINA ESPAÑOLA DE
PATENTES Y MARCAS
19
ESPAÑA
Número de publicación:
21
Número de solicitud: 201431023
51
Int. CI.:
B65D 5/06
B65D 5/54
B65D 5/70
71
Fecha de presentación:
08.07.2014
43
(2006.01)
(2006.01)
(2006.01)
SOLICITUD DE PATENTE
12
22
2 523 022
11
Solicitantes:
TECNOGRAFICA Y MAQUINARIA, S.A. (100.0%)
C/ LA BAUMA, 35
08296 CASTELLBELL I EL VILAR (Barcelona) ES
Fecha de publicación de la solicitud:
72
20.11.2014
Inventor/es:
MACIÀ TREPAT, Josep
74
Agente/Representante:
ISERN JARA, Jorge
54
Título: ENVASE CON ABERTURA DESPLEGABLE
ES 2 523 022 A1
57 Resumen:
Envase con abertura desplegable, resultante del
doblado y plegado adecuado de un cuerpo laminar
que presenta unas líneas de doblado que definen
cuatro paredes rectangulares, que disponen de una
solapa superior común y de otra solapa inferior común
con unas líneas de doblado; la solapa superior
presenta dos líneas de plegado continuadoras de dos
líneas de doblado transversales limitadoras de una
pared que está en una posición central; definiendo
dichas líneas de plegado tres porciones rectangulares
de la solapa superior; presentando la porción central
el mismo eje de simetría que la pared central; estando
dotadas cada una de las porciones de unos añadidos
opuestos a su contacto con las paredes; presentando
el añadido una línea de rasgado que divide al añadido
en dos partes divisorias; presentando la porción una
hendidura, y presentando el añadido una pestaña en
su parte divisoria y que es encajable e introducible en
la hendidura.
FOR MORE INFORMATION OR QUESTIONS, PLEASE CONTACT:
Sr. José Maciá Trepat
[email protected]
A1
Sr. Xavier Maciá Trepat
[email protected]