SIP Call Button 011049

Anuncio
Gang Box Mounting Options
Installation Quick Reference
SIP Call Button
Plastic
Ribbed Anchor (4x)
Network Cable
to J1
Pre Drill Holes
on Wall
SiP Compliant
011049
Wall
Mounting Screw (4x)
Parameter
Factory Default Setting
IP Addressing
DHCP
IP
J2
Wall Cutout
Push Button
Switch
to J2
10.10.10.10
Web Access Username
admin
Web Access Password
admin
Subnet Mask
Backplate accept
Single Gang Box
or Two Gang Box
Default
Wall Cutout
Box Mounting
Screw (4x)
Addressa
a
255.0.0.0
Gatewaya
10.0.0.1
a. Default if there is not a DHCP server present.
Backplate
Typical System Installation
PCBA Mounting
Screw (2x)
Gang Box Mounting Screw (4x)
Generic PoE Switch
*Remove PCBA from Backplate
then Install Backplate
on to Gang Box
PCBA
1
2
3
4
5
6
Contacting CyberData
SIP Call Button
Warranty
Corporate Headquarters
CyberData warrants its product against defects in material or workmanship
for a period of two years from the date of purchase. Should the product fail
within the warranty period, CyberData will repair or replace the product free
of charge. This warranty includes all parts and labor.
CyberData Corporation
2555 Garden Road
Monterey, CA 93940, USA
Should the product fail out-of-warranty, a flat rate repair charge of one half
of the purchase price of the product will be assessed. Repairs that are in
warranty but are damaged by improper modifications or abuse, will be
charged at the out-of-warranty rate. Products shipped to CyberData, both in
and out-of-warranty, are shipped at the expense of the customer. Shipping
charges for repaired products shipped back to the customer by CyberData,
will be paid by CyberData.
Phone: 831-373-2601
Fax: 831-373-4193
www.CyberData.net
Sales: (831) 373-2601 ext. 334
Support: 831-373-2601 ext. 333
Web: http://www.cyberdata.net/support/contactsupportvoip.html
RMA Dept: (831) 373-2601 ext. 136
Email: [email protected]
RMA Status: http://www.cyberdata.net/support/rmastatus.html
CyberData shall not under any circumstances be liable to any person for
any special, incidental, indirect or consequential damages, including
without limitation, damages resulting from use or malfunction of the
products, loss of profits or revenues or costs of replacement goods, even if
CyberData is informed in advance of the possibility of such damages.
SIP Call Button
SIP Call Button
IP Phone
IP PBX Server
Getting Started
• Download the VoIP Call Button Operations Guide PDF file, from the SIP Call Button product page at:
http://www.cyberdata.net/products/voip/digitalanalog/callbutton/docs.html
• Create a plan for the locations of your SIP Call Buttons.
• Prior to installation, consult local building and electrical code requirements.
• WARNING: This enclosure is not rated for any AC voltages!
SIP Call Button Parts
(1) SIP Call Button Assembly
For product service, contact the Returned Materials Authorization (RMA)
department. A product will not be accepted for return without an approved
RMA number. Send the product, in its original package, to: CyberData Corporation, 2555 Garden Road, Monterey, CA 93940, Attention: RMA “your
RMA number”
(1) Wall Mounting Kit
(4) #6 x 1.5 inches
Sheet Metal Screw
(1) Gang Box Mounting Kit
(4) #6 Ribbed Plastic
Anchor
(4) #6-32 x .375-inch FlatHead Machine Screw
The most recent warranty information is available at:
Web: http://www.cyberdata.net/support/warranty/index.html
© 2011, CyberData Corporation, ALL RIGHTS RESERVED
930293C
Quick Reference
Quick Reference
930293C
© 2011, CyberData Corporation, ALL RIGHTS RESERVED
Assembly
Dimensions
Label
4.53 [115.0]
Push Button Switch
Mounting Screw (3x)
4.53 [115.0]
Cover
1.58 [40.2]
DIMENSIONS ARE IN INCHES [MILLIMETER]
Terminal Block Connections
to J2
Wire
Wirein,
[in]
Accept
Wireaccept
Rangewire range
Block can
from 26 AWG to 16 AWG
from 26 AWG to 16 AWG.
PCBA
Alternate Power Input:
1 = +12 to 24VDC at 500 mA
2 = Power Ground
3
4
Relay Contact:
(2A at 30 VDC for continuous loads)
3 = Normally Open Common
4 = Normally Open Contact
5 = Door Sense Input
6 = Door Sense Ground Reference
65
43
Backplate
21
J3 - Terminal Block
© 2011, CyberData Corporation, ALL RIGHTS RESERVED
930293C
Quick Reference
Quick Reference
930293C
© 2011, CyberData Corporation, ALL RIGHTS RESERVED
Descargar