S1700, S2700, S3700, S5700, and S6700 Series Switches Quick Start Guide Issue 03 Date 2023-10-26 HUAWEI TECHNOLOGIES CO., LTD. Copyright © Huawei Technologies Co., Ltd. 2023. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied. Huawei Technologies Co., Ltd. Address: Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: https://e.huawei.com Issue 03 (2023-10-26) Copyright © Huawei Technologies Co., Ltd. i S1700, S2700, S3700, S5700, and S6700 Series Switches Quick Start Guide Contents Contents 1 Packing List............................................................................................................................... 1 2 Installing the Device............................................................................................................... 2 3 Connecting Cables................................................................................................................... 5 4 Powering On the Device........................................................................................................ 7 5 Logging In to a Device for the First Time.......................................................................... 8 Issue 03 (2023-10-26) Copyright © Huawei Technologies Co., Ltd. ii S1700, S2700, S3700, S5700, and S6700 Series Switches Quick Start Guide 1 Packing List 1 Packing List Packing box contents: ● Chassis (with the product model on the nameplate) ● Power cable: If the switch uses a built-in power module or is delivered with a pluggable power module, the power cable is delivered with the switch. In other cases, the power cable is delivered with the power module. ● Installation accessory package: The accessory package may contain the ground cable, mounting brackets, screws, dust plugs, rubber pads, and the Documentation Roadmap & Qualification Card. Floating nuts and M6 screws need to be prepared by the customer. Issue 03 (2023-10-26) Copyright © Huawei Technologies Co., Ltd. 1 S1700, S2700, S3700, S5700, and S6700 Series Switches Quick Start Guide 2 Installing the Device 2 Installing the Device Overview For details about the precautions and requirements for device installation, see "Preparing for Installation" in the Hardware Installation and Component Replacement. S series fixed form-factor devices are available in different dimensions (H x W x D). The installation scenarios and methods vary depending on the dimensions. This document describes the main device installation scenarios: cabinet mounting, desktop mounting, and wall mounting. For details about installation of remote units (RUs) or in other scenarios, refer to the Hardware Installation and Component Replacement. Cabinet Mounting Devices of different dimensions can be installed in a cabinet using mounting brackets, horizontal rack-mounting kits, or trays. This document describes how to install a device using mounting brackets, which vary according to the dimensions of the device. Use the mounting brackets delivered with the device. 1. Use M4 screws to attach mounting brackets to the device. 2. Install floating nuts on the mounting rails of the cabinet. 3. Install the device in the cabinet. Figure 2-1 Installing a device in a cabinet using front mounting brackets Issue 03 (2023-10-26) Copyright © Huawei Technologies Co., Ltd. 2 S1700, S2700, S3700, S5700, and S6700 Series Switches Quick Start Guide 2 Installing the Device Figure 2-2 Installing a device in a cabinet using front and rear mounting brackets Installation videos: (Video) Using Front Mounting Brackets to Install a Fixed Switch in a Cabinet (Video) Using Front and Rear Mounting Brackets to Install a Fixed Switch in a Cabinet Desktop Mounting 1. Attach four rubber pads to the bottom of the device. (For some models, rubber pads or integrated foot pads have been installed before delivery. In this case, you do not need to install rubber pads.) 2. Place the device gently on the desk. 3. (Optional) Install a security lock to lock the switch to the desk. Issue 03 (2023-10-26) Copyright © Huawei Technologies Co., Ltd. 3 S1700, S2700, S3700, S5700, and S6700 Series Switches Quick Start Guide 2 Installing the Device Wall Mounting Depending on device dimensions, the device can be installed on a wall using mounting brackets or without using mounting brackets. Using mounting brackets: 1. Use M4 screws to attach front mounting brackets to the device. 2. Use a hammer drill with a φ8 drill bit to drill holes on the wall, and mount the device on the wall with expansion bolts. Figure 2-3 Wall mounting a device (using mounting brackets) Without mounting brackets: 1. Mark holes on the wall based on the distance between the two mounting holes on the rear panel of the device, and install mounting screws. 2. Align the mounting holes on the rear of the device with mounting screws and hang the device on the mounting screws. Figure 2-4 Wall mounting a device (without using mounting brackets) Issue 03 (2023-10-26) Copyright © Huawei Technologies Co., Ltd. 4 S1700, S2700, S3700, S5700, and S6700 Series Switches Quick Start Guide 3 Connecting Cables 3 Connecting Cables After installing the device, connect the ground cable, power cable, management cable, and service cables to the device. Issue 03 (2023-10-26) Copyright © Huawei Technologies Co., Ltd. 5 S1700, S2700, S3700, S5700, and S6700 Series Switches Quick Start Guide 3 Connecting Cables NOTE The device in the preceding figure is for reference only. The actual port positions and cables vary depending on the device model. Issue 03 (2023-10-26) Copyright © Huawei Technologies Co., Ltd. 6 S1700, S2700, S3700, S5700, and S6700 Series Switches Quick Start Guide 4 1. 4 Powering On the Device Powering On the Device Before powering on the device, ensure that: – The power cable has been properly connected. – The input voltage is normal. (For the operating voltage range of the device, see the Hardware Description of the corresponding product.) 2. Turn on the external power supply to power on the device. 3. Check the device after powering it on. When the device is operating properly, the power indicator is steady green and the SYS indicator blinks green slowly. Issue 03 (2023-10-26) Copyright © Huawei Technologies Co., Ltd. 7 S1700, S2700, S3700, S5700, and S6700 Series Switches Quick Start Guide 5 5 Logging In to a Device for the First Time Logging In to a Device for the First Time You can log in to a device for the first time through the console port or web system. The login method to use depends on the device model and software version. This document briefly describes the key steps and information for logging in to a device for the first time through the web system. NOTE First login to a device is not involved on plug-and-play unmanaged models and RUs. Logging In to the Device for the First Time Through the Web System Only a device with factory defaults can be logged in through the web system for the first time. To log in to a device through the web system, connect a PC to the device according to the table below, configure the IP address of the PC to be in the same network segment as the default IP address of the device, and access the default IP address of the device in a browser by entering https://ip-address. The table below uses V200R022C00 and V600R023C00 as an example. You can also obtain the default IP address and method for logging in to the web system for the first time from the nameplate at the bottom of the device. Issue 03 (2023-10-26) Copyright © Huawei Technologies Co., Ltd. 8 S1700, S2700, S3700, S5700, and S6700 Series Switches Quick Start Guide 5 Logging In to a Device for the First Time Produ ct Series Default IP Address for the First Login to the Web System Description S1700 192.168.1.253 ● S1720-GW, S1720-GWR, S1720GW-E, S1720GWR-E, S1720-GF, S1720GFR-P – Connect a PC to any Ethernet electrical port of the switch. – Default IP addresses: IP address of VLANIF 1 – At the first login, you need to set the username and password for logging in to the device. ● S1730S-S1 – Connect a PC to any Ethernet electrical port of the switch, and hold down the MODE button for more than 6 seconds. When all mode indicators are steady green, the switch enters the initial configuration mode. – Default IP addresses: IP address of VLANIF 1 – At the first login, you need to set the username and password for logging in to the device. ● S1720-X – Connect a PC to the ETH management port on the switch. – At the first login, you need to set the username and password for logging in to the device. ● S1730S-S and S1730S-H: Two methods are available: – Method 1: Connect a PC to the ETH management port on the switch. – Method 2: Connect a PC to any Ethernet electrical port of the switch, and hold down the MODE button for more than 6 seconds. When all mode indicators are steady green, the switch enters the initial configuration mode. The default IP address is the IP address of VLANIF 1. – At the first login, you need to set the username and password for logging in to the device. Issue 03 (2023-10-26) Copyright © Huawei Technologies Co., Ltd. 9 S1700, S2700, S3700, S5700, and S6700 Series Switches Quick Start Guide 5 Logging In to a Device for the First Time Produ ct Series Default IP Address for the First Login to the Web System Description S2700, S5700, and S6700 runnin g V200 192.168.1.253 Three methods are available: ● (Recommended) Method 1: Connect a PC to the ETH management port on the switch. ● Method 2: If the switch has only optical ports, connect a PC to the ETH management port using an Ethernet cable. Hold down the MODE button for 6 seconds or longer. When all mode indicators on the switch are steady green, the switch enters the initial configuration mode. ● Method 3: If the switch has Ethernet electrical ports but does not have an ETH management port, connect the PC to the first Ethernet electrical port of the switch, and hold down the MODE button for 6 seconds or longer. When all mode indicators on the switch are steady green, the switch enters the initial configuration mode. ● At the first login, you need to set the username and password for logging in to the device. S5700 and S6700 runnin g V600 192.168.1.253 Models with the MODE button and running V600R023C00 and later versions: ● Connect a PC to the ETH management port on the switch. If the switch does not have an ETH management port, connect the PC to the first Ethernet electrical port. ● Press and hold down the MODE button for at least 6 seconds. When the MST indicator is steady green, the system configures a default IP address for VLANIF 4092. ● At the first login, you need to set the username and password for logging in to the device. Models without the MODE button or running a version earlier than V600R023C00: ● No default IP address is configured for web login. Therefore, you cannot log in to the switch for the first time through the web system. ● Log in to the switch through the console port and run commands to configure the IP address and interface for logging in to the switch through the web system. ● Enter https://ip-address:port in the address box of the browser to log in to the device. Issue 03 (2023-10-26) Copyright © Huawei Technologies Co., Ltd. 10 S1700, S2700, S3700, S5700, and S6700 Series Switches Quick Start Guide 5 Logging In to a Device for the First Time Produ ct Series Default IP Address for the First Login to the Web System Description S3700 runnin g V600 None ● No default IP address is configured for web login. Therefore, you cannot log in to the switch for the first time through the web system. ● Log in to the switch through the console port and run commands to configure the IP address and interface for logging in to the switch through the web system. ● Enter https://ip-address:port in the address box of the browser to log in to the device. For details about the login method and requirements, see the configuration guide of the corresponding product and version in Table 5-1. Table 5-1 Configuration guide links Product Series Configuration Guide (for Commonly Used Version) S1700 unmanaged switches Unmanaged switch models, requiring no configuration S1700 web-managed switches and fullymanaged switches S1700 V200R022C00 Web User Guide S2700, S5700, and S6700 running V200 S2700, S5700, and S6700 V200R022C00 Configuration Guide - Basic Configuration S5700 and S6700 running V600 S5700 and S6700 V600R022C10 Configuration Guide - Basic Configuration S5700 and S6700 V600R023C00 Web-based Configuration Guide S3700 running V600 Issue 03 (2023-10-26) S3700 V600R022C10 Configuration Guide - Basic Configuration Copyright © Huawei Technologies Co., Ltd. 11
