Plastic enclosures AX Added durability PLASTIC ENCLOSURES AX 2 Plastic enclosures AX AX. System perfection. After more than 30 years, Rittal is revolutionising the field of plastic enclosures and complementing its AX series of sheet steel and stainless steel enclosures. With the plastic enclosure AX, Rittal has now combined the benefits of a sophisticated system technology with those of an extremely robust material to produce a unique enclosure series. The new plastic enclosure AX stands for maximum simplification, speed and configuration freedom, while at the same time meeting the highest demands in terms of safety and robustness. Whether in the workshop or outdoors exposed to the elements – the plastic enclosure AX weathers all extremes. The AX enclosure series defines the standards for Industry 4.0-compliant enclosure manufacture. Plastic enclosures AX 3 4 Plastic enclosures AX Enclosure ◾ 14 different enclosure variants, with or without viewing panel ◾ Symmetrical layout means the enclosure is easily rotated through 180° ◾ Double seal with an integral rain protection strip on the top and bottom edge of the door to protect the seal from dust and rainwater ◾ Fibreglass-reinforced plastic with a high level of UV resistance Siting ◾ Wall mounting brackets are easily secured from the outside while retaining the UL approval ◾ The pole clamp may be screw-fastened directly into the external threaded inserts ◾ Ideally suited for outdoor applications Mounting plate ◾ The mounting plate is easily screwfastened onto the pre-assembled bolts from the front ◾ Simple earthing of the mounting plate, even retrospectively, using machined keyholes ◾ With pitch pattern markings for faster component positioning Interior installation ◾ Numerous mounting bosses for individual interior installation ◾ Interior installation on a 25 mm pitch pattern with universal bracket for mounting punched sections and rails ◾ Direct door installation with support strips and punched sections with mounting flanges 14 x 39 mm, for use as an additional mounting surface ◾ Door-operated switches may be attached directly to the mounting bosses Plastic enclosures AX 5 6 Plastic enclosures AX Door installation ◾ Direct use of the door surfaces as additional component mounting space ◾ Compatibility with Rittal system accessories enables punched sections, rails, wiring plan pockets, etc. to be fitted directly to the inside of the door ◾ Simple mounting of a door stay without additional machining to secure the door in the open position ◾ The integrated runners at the top and bottom of the door ensure a precise fit even where heavy components are installed and thus safeguard the specified protection rating Safety ◾ High level of safety for people and installed equipment ◾ UL F1 outdoor rating (UL 746C) thanks to 7 times higher UV resistance ◾ UL approval for industrial enclosures (508A) ◾ Fire protection corresponding to UL 94 V-0 ◾ Smart enclosure design permits interior installation without impairment of the encapsulated space, i.e. – retaining the high protection category up to IP 66/NEMA 4X – retaining protection class II Rittal Configuration System ◾ Simple selection of enclosures and suitable accessories ◾ Automatic generation of CAD data and Eplan macros for the completed enclosure during the configuration process ◾ Direct ordering Engineering ◾ Rittal’s customers are supported by a wealth of conversion and planning tools in the automated production process and when working with a virtual prototype: – EPLAN Pro Panel data – 2D/3D CAD data – ecl@ss Advanced data – Technical documentation – Data for planners – “How-to” video Plastic enclosures AX 7 Plastic enclosures AX Surface finish: – Enclosure and door: Dyed plastic with no after-treatment – Mounting plate: Zinc-plated Colour: – Similar to RAL 7035 Protection class: – II at 1000 V AC Note: – Interior installation screws are required to secure components inside the enclosure – Components such as punched sections with mounting flanges may be attached on a 25 mm pitch pattern using the universal bracket Protection category NEMA: – NEMA 4X Supply includes: – Enclosure with hinged door, of all-round solid construction, 3 mm double-bit lock – Door hinged on the right, may be swapped to the left – Mounting plate – Twin seal on the top and bottom edges of the door as integral rain protection strip Please note the product-specific scope of supply. F T B G Protection category IP to IEC 60 529: – IP 66 Approvals: – UL – cUL Further approvals can be found on the Internet. H Material: – Enclosure and door: Fibreglass-reinforced unsaturated polyester – Fire protection corresponding to UL 94 V-0 – Door: All-round foamed-in PU seal – Mounting plate: Sheet steel without viewing window Width (B) mm 250 300 400 400 500 600 600 800 Height (H) mm Packs of 350 400 400 600 500 600 800 1000 Depth (T) mm 150 200 200 200 300 200 300 300 Mounting plate width (F) mm 155 205 305 305 405 505 505 705 Mounting plate height (G) mm 275 325 325 525 425 525 725 925 Mounting plate thickness mm 2.5 2.5 2.5 3.0 3.0 3.0 3.0 3.0 Model No. 1 pc(s). Weight kg Page 1432.000 1434.000 1444.000 1446.000 1453.000 1466.000 1468.000 1480.000 4.4 6.3 7.8 11.1 13.1 15.5 22.4 34.2 1 2 2 2 2 2 2 3 Product-specific scope of supply Cam lock Accessories Wall mounting bracket 4 pc(s). 1485.400 1485.400 1485.400 1485.400 1485.400 1485.400 1485.400 1485.400 10 Pole clamp 2 pc(s). 2584.100 2584.100 2584.100 2584.100 2584.100 2584.100 2584.100 11 – Universal bracket 4 pc(s). 1485.200 1485.200 1485.200 1485.200 1485.200 1485.200 1485.200 1485.200 11 Door stay 2 pc(s). 1485.100 1485.100 1485.100 1485.100 1485.100 1485.100 1485.100 1485.100 12 LED system light – Mini-comfort handle AX 1 pc(s). Cable gland 2500.100 2500.100 2500.100 2500.100 2500.110 2500.110 15 1485.600 1485.600 1485.600 1485.600 1485.600 1485.600 1485.600 1485.600 10 see page – see page 13 Screw for interior installation 50 pc(s). 1485.300 1485.300 1485.300 1485.300 1485.300 1485.300 1485.300 1485.300 11 Wiring plan pocket 1 pc(s). 13 Punched section with mounting flange 23 x 64 mm, installation in the height Punched section with mounting flange 23 x 64 mm, installation in the width – – see page – see page – see page – see page – see page see page 4116.500 4116.500 4118.500 8617.110 8617.110 8617.130 8617.120 8617.130 8617.140 8617.150 4 pc(s). 14 – – 8617.110 8617.110 8617.120 8617.130 8617.130 8617.140 Support strips, installation in the door 20 pc(s). – – 4594.000 4594.000 4309.000 4596.000 4596.000 4598.000 12 Punched section with mounting flange 14 x 39 mm, installation in the door 4 pc(s). – – 8619.700 8619.700 8619.710 8619.720 8619.720 8619.730 12 8 Further technical information available on the Internet. Plastic enclosures AX Plastic enclosures AX Surface finish: – Enclosure and door: Dyed plastic with no after-treatment – Mounting plate: Zinc-plated Colour: – Similar to RAL 7035 Protection class: – II at 1000 V AC Protection category NEMA: – NEMA 12 Supply includes: – Enclosure with hinged door with viewing window, of all-round solid construction, 3 mm double-bit lock – Door hinged on the right, may be swapped to the left – Mounting plate – Twin seal on the top and bottom edges of the door as integral rain protection strip Please note the product-specific scope of supply. Note: – Interior installation screws are required to secure components inside the enclosure – Components such as punched sections with mounting flanges may be attached on a 25 mm pitch pattern using the universal bracket F T B G Protection category IP to IEC 60 529: – IP 56 Approvals: – UL – cUL Further approvals can be found on the Internet. H Material: – Enclosure and door: Fibreglass-reinforced unsaturated polyester – Fire protection corresponding to UL 94 V-0 – Door: All-round foamed-in PU seal – Mounting plate: Sheet steel – Viewing window: Polycarbonate with viewing window Width (B) mm 400 400 500 600 600 800 Height (H) mm 400 600 500 600 800 1000 Depth (T) mm 200 200 300 200 300 300 Mounting plate width (F) mm 305 305 405 505 505 705 Mounting plate height (G) mm 325 525 425 525 725 925 Mounting plate thickness mm 2.5 3.0 3.0 3.0 3.0 3.0 1448.000 1449.000 1454.000 1467.000 1469.000 1479.000 7.7 10.9 12.9 15.2 21.9 33.2 2 2 2 2 2 3 Model No. Packs of 1 pc(s). Weight kg Page Product-specific scope of supply Cam lock Accessories Wall mounting bracket 4 pc(s). 1485.400 1485.400 1485.400 1485.400 1485.400 1485.400 Pole clamp 2 pc(s). 2584.100 2584.100 2584.100 2584.100 2584.100 – 11 Universal bracket 4 pc(s). 1485.200 1485.200 1485.200 1485.200 1485.200 1485.200 11 Door stay 2 pc(s). LED system light Mini-comfort handle AX 1 pc(s). Cable gland 10 1485.100 1485.100 1485.100 1485.100 1485.100 1485.100 12 2500.100 2500.100 2500.100 2500.100 2500.110 2500.110 15 1485.600 1485.600 1485.600 1485.600 1485.600 1485.600 10 see page see page see page see page see page see page 13 Screw for interior installation 50 pc(s). 1485.300 1485.300 1485.300 1485.300 1485.300 1485.300 11 Wiring plan pocket 1 pc(s). – – – 4116.500 4116.500 4118.500 13 8617.110 8617.130 8617.120 8617.130 8617.140 8617.150 8617.110 8617.110 8617.120 8617.130 8617.130 8617.140 Punched section with mounting flange 23 x 64 mm, installation in the height Punched section with mounting flange 23 x 64 mm, installation in the width 4 pc(s). 14 Support strips, installation in the door 20 pc(s). 4594.000 4594.000 4309.000 4596.000 4596.000 4598.000 12 Punched section with mounting flange 14 x 39 mm, installation in the door 4 pc(s). 8619.700 8619.700 8619.710 8619.720 8619.720 8619.730 12 Plastic enclosures AX Further technical information available on the Internet. 9 Plastic enclosures AX Accessories Mini-comfort handle AX Packs of Model No. for AX plastic The lock is opened by swivelling the unlocked handle. Prepared for the installation of lock inserts or for the installation of standard commercially available 40 or 45 mm profile half-cylinders, as well as lock and push-button inserts. 1 pc(s). 1485.600 Lock inserts, type A 7 mm square 2460.000 8 mm square 2461.000 7 mm triangular 2462.000 8 mm triangular 2463.000 Protection category IP to IEC 60 529: – IP 66 (in conjunction with AX plastic without viewing window) Screwdriver 2464.000 Daimler insert 2465.000 3 mm double-bit 2466.000 Protection category NEMA: – NEMA 4 (in conjunction with AX plastic without viewing window) Fiat 2307.000 6.5 mm triangular 2460.650 Lock and push-button inserts Lock insert, lock no. 3524 E1) 2467.000 Push-button insert 2468.000 Push-button and lock insert1) 2469.0002) Profile half-cylinders 9785.0405) to DIN 18 2523) 9785.0424) 1) With 2 keys. 2) Lock no. 2123; no other lock is possible 3) With 3 keys for each lock insert 4) Packs of two, simultaneous locking within the same pack, no simultaneous locking for different packs 5) Lock-specific key Wall mounting bracket for AX plastic For attachment to the wall, only possible from the outside of the enclosure. 1) Colour Packs of RAL 7035 4 pc(s). Model No. 1485.400 RAL 9011 4 pc(s). 1485.5001) With graphite additive for Ex applications Material: – Fibreglass-reinforced polyamide1) Section A – A Supply includes: – Assembly parts for mounting on the enclosure 32 A 11 30 15 27 M8 67 11 38.5 24 90° Ø9 A 10 Further technical information available on the Internet. Plastic enclosures AX Plastic enclosures AX Accessories Pole clamp Packs of Model No. for AX, KX, AX plastic, AX IT For reliable, convenient fastening to round or square poles. 2 pc(s). 2584.100 Universal bracket Packs of Model No. for AX plastic and Ex enclosure, plastic For the interior installation on a 25 mm pitch pattern of – Punched sections with mounting flanges – Door rails – Support strips 4 pc(s). 1485.200 For pole diameter / size: – Ø from 40 to 170 mm – □ from 50 to 150 mm Material: – Mounting angles, clamping section: Sheet steel – Clamping strap: Stainless steel 1.4301 (AISI 304) Surface finish: – Mounting angle, clamping section: Zinc-plated Supply includes: – 2 mounting angles, 600 mm long – 4 clamping sections – 2 clamping straps – 4 clamping brackets – Assembly parts Material: – Sheet steel, zinc-plated Supply includes: – Assembly parts Screw for interior installation for AX plastic For mounting accessories on the mounting bosses of the enclosure frame. Type of screw Packs of Model No. Pan head screw, self-tapping 50 pc(s). 1485.300 Drive: Multi-tooth 25 Dimensions: 5 x 14 mm Plastic enclosures AX Further technical information available on the Internet. 11 Plastic enclosures AX Accessories Support strip For attachment of – Cable ducts – Cable conduit holders – Equipment installed on the door – Cable clamping and attachment 4.5 mm diameter hole on a 25 mm DIN pitch pattern Installation options: – In AX plastic on mounting bosses in the door Material: – Sheet steel For door width mm Distance between attachment points mm 400 275 20 pc(s). 4594.000 500 375 20 pc(s). 4309.000 600 475 20 pc(s). 4596.000 800 675 20 pc(s). 4598.000 Packs of Model No. Accessories: – Screw for interior installation, see page 11 Surface finish: – Zinc-plated Supply includes: – Assembly parts Punched section with mounting flange, 14 x 39 mm For door width mm Distance between attachment points mm Packs of Model No. for door installation 400 275 4 pc(s). 8619.700 For attachment of – Cable ducts – Cable conduit holders – Equipment installed on the door, etc. 500 375 4 pc(s). 8619.710 600 475 4 pc(s). 8619.720 800 675 4 pc(s). 8619.730 Installation options: – In AX plastic on mounting bosses in the door Material: – Sheet steel Accessories: – Screw for interior installation, see page 11 Surface finish: – Zinc-plated Supply includes: – Assembly parts Door stay AX for AX plastic and Ex enclosure, plastic To secure the door in the open position. May be fitted without machining the enclosure. Assembly Packs of Model No. Top/bottom 2 pc(s). 1485.100 Supply includes: – Assembly parts Installation options: – Installation directly at the bottom right/top left – When swapping the door hinge to the opposite side, the prefitted door stay is easily removed and re-installed 12 Further technical information available on the Internet. Plastic enclosures AX Plastic enclosures AX Accessories Wiring plan pocket, sheet steel For fastening to the mounting bosses in the door of AX plastic enclosures. Colour: – RAL 7035 D = 35 mm Clearance opening mm To fit door width mm Model No. W H 600 455 210 4116.500 800 655 210 4118.500 Also required: – Screw for interior installation, see page 11 Plastic wiring plan pocket For adhering to surfaces. Clearance opening mm For format W H Model No. D Material: – Polystyrene with self-adhesive fastening strips A3 landscape 438 286 45 2513.000 A4 portrait 228 254 17 2514.000 Colour: – Similar to RAL 7035 A5 landscape 228 174 17 2515.000 Wiring plan pocket with transparent pouch For format Model No. A4 2510.000 With welded-on transparent pouch and self-adhesive backing. A3 2512.000 Cable gland, polyamide Benefits: – Because the gland and lock nut are sold together in a single pack, this saves additional ordering and storage – Clamping membranes for even tightening and strain relief to protect the cables Material: – Polyamide 6 – Seal: CR Size Packs of Model No. M12 x 1.5 50 pc(s). 2411.601 M16 x 1.5 50 pc(s). 2411.611 M20 x 1.5 50 pc(s). 2411.621 M25 x 1.5 25 pc(s). 2411.631 M32 x 1.5 15 pc(s). 2411.641 M40 x 1.5 5 pc(s). 2411.651 M50 x 1.5 5 pc(s). 2411.661 M63 x 1.5 3 pc(s). 2411.671 Colour: – RAL 7035 Protection category IP to IEC 60 529: – IP 68 (5 bar, 30 min.) Approvals: – VDE, UL, cUL, CSA Plastic enclosures AX Further technical information available on the Internet. 13 Plastic enclosures AX Accessories Punched section with mounting flange, 23 x 64 mm For variable and individual interior installation. Installation options: AX plastic – In the width and height of the enclosure in conjuction with universal bracket Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly parts For enclosure width/height/depth mm Packs of Model No. 400 4 pc(s). 8617.110 500 4 pc(s). 8617.120 600 4 pc(s). 8617.130 800 4 pc(s). 8617.140 1000 4 pc(s). 8617.150 Also required: – For AX plastic: Universal bracket 1485.200, see page 11 Accessories: – Screw for interior installation, see page 11 Mounting plate Packs of Model No. Screw-fastened, large 4 pc(s). 8612.410 Installation options: – For attachment to mounting bosses in the door and on enclosure surfaces inside AX plastic enclosures Accessories: – Screw for interior installation, see page 11 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly screws Mounting plate Packs of Model No. Screw-fastened, small 4 pc(s). 4532.000 Installation options: – For attachment to mounting bosses in the door and on enclosure surfaces inside AX plastic enclosures Accessories: – Screw for interior installation, see page 11 Material: – Sheet steel Surface finish: – Zinc-plated Supply includes: – Assembly screws Mounting bracket Packs of Model No. Installation options: – For attachment to mounting bosses in the door and on enclosure surfaces inside AX plastic enclosures 4 pc(s). 4597.000 Material: – Sheet steel Accessories: – Screw for interior installation, see page 11 Surface finish: – Zinc-plated Supply includes: – Assembly screws 14 Further technical information available on the Internet. Plastic enclosures AX Plastic enclosures AX Accessories LED system light Light colour: – 4000 K (neutral white) Material: – Plastic – Aluminium Supply includes: – Assembly screws Colour: – Similar to RAL 7016 Also required: Protection class: – II (all-insulated) – Connection accessories, see page 15 – Mounting bracket for interior installation, see page 15 Model No. 2500.100 2500.104 2500.110 2500.114 Output 400 400 600 600 Length (mm) 262 262 337 337 100 – 240 V AC 100 – 240 V AC 100 – 240 V AC 100 – 240 V AC UL/cUL – ◾ – ◾ CSA – ◾ – ◾ Rated operating voltage Approvals CCC ◾ ◾ ◾ ◾ ENEC ◾ ◾ ◾ ◾ 6205.100 Connection options Infeed, 2-pole Accessories Mounting bracket for interior installation 6205.100 6205.100 6205.100 Door-operated switch 2500.460 – 2500.460 – – 2500.470 – 2500.470 2500.420 – 2500.420 – – 2500.520 – 2500.520 Door-operated switch, UL Connection accessories Infeed, 2-pole Infeed, 2-pole, UL Mounting bracket for interior installation For installing the LED system light in plastic enclosures AX. Packs of Model No. 4 pc(s). 6205.100 Surface finish: – Zinc-plated Material: – Sheet steel Supply includes: – Assembly parts Connection accessories for LED system light The following components can be used for time-saving, easy installation of the lights: Model No. ENEC UL Length mm Packs of Infeed, 2-pole, 100 – 240 V AC – ◾ 3000 1 pc(s). 2500.520 Infeed, 2-pole, 100 – 240 V AC ◾ – 3000 5 pc(s). 2500.420 Connection cable for orange Door-operated switch with connection cable for LED system light Supply includes: – Assembly parts Connection cable Plastic enclosures AX ENEC UL Length mm ◾ – 800 – ◾ 800 Model No. To fit Packs of 230 V AC/ 24 V DC, 1A 1 pc(s). 2500.460 1 pc(s). 2500.470 Black Further technical information available on the Internet. 15 Milling centre Perforex BC Perforex machining centres accelerate your throughput times when machining anything from the smallest enclosures and enclosure panels, right through to large enclosures. The drilling and milling centres in the Perforex BC series allow you to machine any material, including spray-finished sheet and stainless steel as well as aluminium, copper and the new AX plastic enclosure. The fully welded machine frame guarantees short throughput times with a consistently high machining quality plus fast, precise and reliable working. ◾ Convenient data import and further processing with interfaces to all common CAD systems (DXF import) or else direct data transfer from EPLAN Pro Panel ◾ Transfer of configuration data from the Rittal Configuration System (RiCS) ◾ Performance package for fast, low-vibration, noise-optimised milling ◾ Patented plate with integral swarf extraction system ◾ High-performance spindle including minimal quantity lubrication for drilling, milling and thread tapping ◾ Automated tool testing and changing ◾ DIN tools ◾ Pneumatic clamping device 16 Further information can be found at www.rittal.com/ras Plastic enclosures AX Maximum protection for your equipment Thanks to its 7 times greater UV resistance – confirmed by an F1 rating to UL 746C – alongside further benefits such as integrated rain protection strips or stable stainless steel hinges, the robust plastic enclosure of the AX enclosure series is predestined for outdoor applications and use in the toughest environments. Maritime industry Extreme ambient conditions place particular demands on the material and surface properties of an enclosure. The plastic enclosure offers corrosion protection and is resistant to UV radiation, salt and salty air. Wastewater management Especially in this field, enclosures are exposed to various damaging influences, for example aggressive vapours which can attack the material. The plastic enclosure offers optimum protection – in the same way as against wind, weather and UV radiation. Railway technology Thanks to its robust material and stable construction, the plastic enclosure withstands aggressive environments, dampness and all arising pressure/suction forces. Airports The plastic enclosure withstands UV radiation, rain, snow and storm, and offers protection against flying debris such as tyre wear particles. Plastic enclosures AX 17 Technical details Compact enclosures AX With viewing window Without viewing window B H8 H1 1 2 C C B8 1 B B1 Not with1432.000 Centre lock only for 1432.000, 1479.000, 1480.000 Section C – C T3 T1 1 B7 Mounting bosses for interior installation Rear 20 Internal view of door 75 H6 H2 H5 H4 75 75 75 20 B4 B5 B2 18 20 B6 20 Plastic enclosures AX Technical details Compact enclosures AX Section B – B Ø F1 11 2 1 1 1 Ø G2 H3 H7 G1 2 9 18.5 18.5 Ø 2 11 F2 T2 M B3 Mounting bosses on rear panel Mounting bosses for interior (not applicable for 1432.000, 1434.000) Centre mounting points for mounting plate installation Centre mounting points for mounting plate (not applicable for 1432.000, 1434.000, 1444.000, 1448.000) Preparation for direct mounting (not applicable for 1432.000, 1434.000, 1444.000, 1448.000) of a door-operated switch Enclosure B1 = Enclosure width (overall width) B2 = Door width B3 = Clearance width, enclosure opening B4 = Clearance width between door reinforcement B5 = Distance between door reinforcement attachment points B6 = Width spacing of enclosure mounting points B7 = Clear enclosure width between mounting points B8 = Visible width for versions with viewing window H1 = H2 = H3 = H4 = H5 = H6 = H7 = H8 = Mounting plate F1 = Mounting plate width F2 = Centre-to-centre spacing of the attachment holes Enclosure height (overall height) Door height Clearance height, enclosure opening Clearance height between door reinforcement Distance between door reinforcement attachment points Height spacing of enclosure mounting points Clear enclosure height between mounting points Visible height for versions with viewing window G1 = Mounting plate height G2 = Centre-to-centre spacing of the attachment holes M = Mounting plate thickness T1 = Overall depth T2 = Enclosure depth T3 = Installation depth (distance from inside of door to mounting plate) Width dimensions mm Model No. AX B1 B2 B3 B4 B5 B6 Depth dimensions mm Height dimensions mm B7 B8 H1 H2 H3 H4 H5 H6 H7 H8 T1 T2 T3 Mounting plate mm F1 F2 G1 G2 Viewing window M Without With ◾ ◾ ◾ ◾ – – ◾ ◾ 1432.000 250 245.9 176.6 104 125 202.2 200 – 350 326.4 300.6 228 250 302.2 300 – 150 126.5 116 155 125 275 250 2.5 1434.000 300 295.9 226.6 154 175 249.5 250 – 400 376.4 350.6 278 300 349.5 350 – 200 176.5 166 205 175 325 300 2.5 1444.000 400 395.9 326.6 254 275 349.5 350 – 400 376.4 350.6 278 300 349.5 350 – 200 176.5 166 305 275 325 300 2.5 1446.000 400 395.9 326.6 254 275 349.5 350 – 600 576.4 550.6 478 500 549.5 550 – 200 176.5 166 305 275 525 500 1448.000 400 395.9 326.6 254 275 349.5 350 228 400 376.4 350.6 278 300 349.5 350 252 200 176.5 166 305 275 325 300 2.5 1449.000 400 395.9 326.6 254 275 349.5 350 228 600 576.4 550.6 478 500 549.5 550 452 200 176.5 166 305 275 525 500 3 – 1453.000 500 495.9 426.6 354 375 444.3 450 300 276.5 266 405 375 425 400 3 ◾ – 1454.000 500 495.9 426.6 354 375 444.3 450 328 500 476.4 450.6 378 400 444.3 450 352 300 276.5 266 405 375 425 400 3 – ◾ 1466.000 600 595.9 526.6 454 475 549.5 550 200 176.5 166 505 475 525 500 3 ◾ – 1467.000 600 595.9 526.6 454 475 549.5 550 428 600 576.4 550.6 478 500 549.5 550 452 200 176.5 166 505 475 525 500 3 – ◾ 1468.000 600 595.9 526.6 454 475 544.3 550 300 276.5 266 505 475 725 700 3 ◾ – 1469.000 600 595.9 526.6 454 475 544.3 550 428 800 776.4 750.6 678 700 744.3 750 652 300 276.5 266 505 475 725 700 3 – 1479.000 800 795.9 726.6 654 675 744.3 750 628 1000 976.4 950.6 878 900 944.3 950 852 300 276.5 266 705 675 925 900 3 – ◾ ◾ 1480.000 800 795.9 726.6 654 675 744.3 750 3 ◾ – Plastic enclosures AX – – – – 500 476.4 450.6 378 400 444.3 450 600 576.4 550.6 478 500 549.5 550 800 776.4 750.6 678 700 744.3 750 1000 976.4 950.6 878 900 944.3 950 – – – – 300 276.5 266 705 675 925 900 3 – – – 19 ◾ Enclosures ◾ Power Distribution ◾ Climate Control ◾ IT Infrastructure You can find the contact details of all Rittal companies throughout the world here. www.rittal.com/contact XWW00217EN2005 ◾ Software & Services
