Level 43 parts Time to create ~ 12 to 18 hourse FOX ON THE MOON 490 x 150 x 530 mm Paper side 2018. All rights reserved. This model (and instructions) are provided for the sole purpose of your personal pleasure. Copying, selling, sharing privately or publicly are strictly prohibited without my authorisation. Thank you for your understanding. GSPublisherEngine 0.43.100.63 THE PRINCIPLE SCORE FOLD FOLLOW THE PAST NAMES valley fold = fold up mountain fold = fold down 1 FIND THE MATHING POINTS SND CLUE TOGETHER 22 8 2 12 15 12 13 8 20 21 3 3 1 1 CUT OFF 15 3 EQUIPMENT YOU’LL NEED A4/letter A4/letter 180-210 gsm B&W x13 180-210 gsm A4/letter x5 180-210 gsm A4/letter x1 regular colour 1 colour 2 colour 3 white MOON BODY EARS AND PAWS Instructions (optional) x7 Choose water-based glue or Better in metal, but let’s not be too fussy here. Avoid the lumpy glue sticks and the dripping super glue Toothpicks are optional but prove useful to spread the glue evenly for example or or TIPS & TRICKS 1 HOW TO SCORE Use a ruler with / a dried out ball point pen / the tip of a pointy object (compasses) / the dull side of a knife or X-acto knife. If it gets though the sheet, then this is not the right tool. Batch your pieces to save time. 2 PUT PARTS IN ORDER (FIRST PART ON TOP) Pile the parts: 1 above, 16 below. This will also save your time later when you are in the heat of the action! 3 GLUE THE NON-PRINTED SIDE OF THE FLAPS The printed side and the flaps are hidden inside the sculpture. So press the non-printed side of a flap against the printed side of its matching edge. 4 ONE FLAP AT A TIME Take the time to position a flap accurately. Wait for it to dry before you move on to the next one (5 to 7secs). 5 USE VERY LITTLE GLUE (ALONG THE OUT EDGE OF THE FLAPS) A thin line of glue or a few tiny drops are more than enough, or it will spread and spoil the outside of your sculpture. If it happens, scrape out the surplus with your nail, then rub the paper with a little saliva. 6 AVOID POTENTIAL OFFSETS OF THE PARTS If one flap is slightly misplaced, it will increasingly affect each following edge. If this happens and your glue has dried, don’t try to unstick the flap. Instead, try to adjust the offset bit by bit at the next flap onward. Here is a good method to avoid offsets: When adding a new part, take Firmly hold the corners first, until the glue sticks (5 sec.) a moment to be sure the first flap aligns accurately and then press the rest. with its matching edge. 7 Now that the first end of the next tab is in place, it will be easy to align the second end of it. Again, press the corner Keep holding it while aligning first and wait 5 seconds. the middle of the tab. (when it comes to longer flaps, press for another 5 sec). Then press back & forth between the 2 ends. AND OBVIOUSLY, KEEP YOUR HANDS CLEAN. Regularly rub your fingers to get rid of the tiny dry bits of glue. Otherwise they will turn black, get on to your sculpture and become difficult to remove. LET’S GO! 2/7 GSPublisherEngine 0.43.100.63 1 +2 +4 +5 +7 +8 +10 +11 MOON +3 +6 +9 3/7 GSPublisherEngine 0.43.100.63 +12 +13 +15 +16 +14 FOX Turn the front side of the item 17 and 18. Paint over black color nose and eyes. As the picture shows 23 15 28 39 28 15 39 24 53 12 52 26 14 40 87 14 13 14 16 27 33 22 68 16 52 26 34 18 48 16 40 14 49 29 29 22 27 33 51 93 16 13 19 13 41 42 55 80 20 17 21 80 95 56 42 116 35 96 +19 55 34 94 21 17 27 91 91 20 40 +18 27 41 32 21 94 81 40 34 17 21 19 31 32 116 39 92 51 93 81 19 31 39 13 19 49 34 9 10 30 24 18 12 6 48 67 33 29 12 49 20 22 22 49 33 56 99 43 98 10 38 57 0 36 99 105 93 91 98 0 10 38 43 11 5 37 5 96 57 11 35 95 36 105 95 91 92 93 37 17 42 95 92 3 41 81 94 10 17 42 104 10 0 41 81 94 10 96 10 0 104 104 78 101 10 6 80 104 99 101 96 78 99 10 6 10 10 2 79 1/6 (row1 col1) 1/6 (row1 col1) 97 4/7 98 77 GSPublisherEngine 0.43.100.63 97 98 80 2 79 77 67 29 31 18 2035 10 26 10 26 92 30 47 53 11 50 44 45 8 11 25 7 25 23 54 47 31 30 12 30 35 48 18 9 9 9 66 48 24 24 10 65 6 50 44 45 7 54 46 66 32 32 28 11 38 8 8 46 28 11 8 25 17 47 15 38 7 46 47 18 15 7 25 46 3 +20 +22 +21 +24 +23 +25 +26 +29 5/7 GSPublisherEngine 0.43.100.63 +27 +28 +30 +31 +32 +33 +34 +35 +36 +37 +39 +40 +42 +43 +38 +41 6/7 GSPublisherEngine 0.43.100.63 Attach the Fox to the moon, as shown in the picture 7/7 GSPublisherEngine 0.43.100.63 114 101 117 99 6 11 106 10 0 2 11 5 1 114 117 1/19 GSPublisherEngine 0.43.100.63 1/26 (row1 col1) 97 98 97 100 1 11 113 7 10 3 101 16 110 11 2 115 6 11 2/19 GSPublisherEngine 0.43.100.63 2/26 (row1 col2) 103 119 100 104 5 11 8 120 127 126 128 125 8 120 GSPublisherEngine 0.43.100.63 3/19 col3) 3/26 (row1 99 107 5 10 4 106 104 103 2 10 GSPublisherEngine 0.43.100.63 4/19 col4) 4/26 (row1 129 105 6. 118 130 128 5/26 (row1 5/19 col5) GSPublisherEngine 0.43.100.63 98 10 2 119 129 7 96 GSPublisherEngine 0.43.100.63 6/19col6) 6/26 (row1 12 124 7 9. 6 12 3 12 12 1 130 12 2 7/19 GSPublisherEngine 0.43.100.63 7/26 (row1 col7) 12 2 96 125 109 10 13 8/19 GSPublisherEngine 0.43.100.63 4 134 124 133 11 132 143 2 14 131 9/19 GSPublisherEngine 0.43.100.63 9/26 (row1 col9) 136 121 135 12 123 138 137 133 10/19 GSPublisherEngine 0.43.100.63 10/26 (row1 col10) 140 139 135 13 138 141 137 2 14 143 11/19 GSPublisherEngine 0.43.100.63 11/26 (row1 col11) 0 8 11 10 8 10 140 132 14 136 109 12/26 (row1 col12) 12/19 GSPublisherEngine 0.43.100.63 139 111 13/26 (row1 col13) 13 2 11 13/19 GSPublisherEngine 0.43.100.63 1 141 113 15 99 8 996 9975 101 9979 9 109 1 0 10 91080 97 95 9935 101 8919 91 93 78 98 97 96 78 0 788 6 994 8 776 80 98 92 9942 79 81 9902 94 0 881 0 9931 4433 56 5566 95 4422 93 17 55 55 55 27 91 51 25 91 4411 93 5511 22 7 9913 27 22 22 49 55 4499 24 41 91 996 8 98 7 117 35 8 38 27 2756 89 91 21 7 8 25 40 9 22 26 26 52 52 40 40 26 52 20 48 26 4488 24 42 10 51 10 9 24 26 29 1010 19 26 9 9 24 24 47 53 8 3 553 22 4477 31 88 13 39 24 25 52 45 10 2255 444 4 7 4455 50 997 9 99 22 7 7 23 10 43 80 42 7808 91080 81 5 10 20 43 81 2200 40 4 992 19 80 31 4400 0 46 20 94 1 789 1199 3311 7 10 33 22 6 994 7 3333 47 19 19 95 96 16 9 1166 29 19 19 2 222 2 990 116 29 29 81 9 92 54 44 2 39 3 223 5500 98 19 14 40 18 9 20 10 40 96 38 26 13 1188 35 2 200 48 10 100 1 94 3388 (ro 1/6 28 15 35 35 16 9 35 77 ) c w1 ol1 79 1155 10 99 25 35 35 99 37 5544 49 38 49 8 26 39 24 32 57 21 88 29 39 39 34 79 77 57 3344 37 77 79 75 77 38 38 92 2266 48 46 36 3377 18 7 24 47 3366 36 92 77 35 2244 49 93 26 40 9953 14/19col1) 1/6 (row1 GSPublisherEngine 0.43.100.63 92 100 25 27 91 40 66 19 95 30 21 27 50 2211 23 16 25 34 40 14 94 25 22 32 3322 6 45 44 45 6 8 8 22 33 21 41 4466 25 25 20 50 44 46 18 32 38 31 93 17 5577 9 42 23 6 33 41 99 17 41 41 41 4422 41 42 42 1 53 69 72 84 65 86 31 55 87 61 60 61 56 71 83 34 64 51 70 60 87 35 64 83 62 62 52 73 86 63 85 53 74 88 81 73 3 80 82 5 36 80 82 70 4 39 1 2 16/19 GSPublisherEngine 0.43.100.63 3/6 (row1 col3) 115 11 4 41 11 1 6 11 109 10 4 8 10 1 00 59 110 111 10 1 71 40 109 3 103 43 58 5 8 1 59 GSPublisherEngine 0.43.100.63 4/6 (row1 col4) 17/19 10 75 11 2 6 10 77 10 7 88 106 38 32 44 84 45 54 57 3 11 50 63 6 74 105 81 4 5/6 (row1 col5) 18/19 GSPublisherEngine 0.43.100.63 2 37 58 66 72 105 11 0 4 67 11 68 107 76 112 43 99 95 36 29 37 11 23 6/6 (row1 19/19col6) GSPublisherEngine 0.43.100.63 3 46 65 34 69 28 39 33 12 49 85 67 18 12 31 30 30 15 11 24 29 20 66 28 32 11 47 48 19 33 23 27 13 16 14 14 68 21 17 13 116 5 11 103 42 1 10 102 10 4 102 10 0 GSPublisherEngine 0.43.100.63 15/19 2/6 (row1 col2)
