wacker neuson-850

850
Wheel Loaders: bucket capacity 0.7-1.8 m³
850 All Wheel Steer Loader
The 850 wheel loader offers easy transport and maneuverability around the job site. This unit features a long wheelbase for smooth driving and
easy handling even across the roughest terrain. Counterweights are located far behind the rear axle for higher payloads and more stability.
Four-wheel drive steering offers excellent maneuverability, overall machine stability and increased payloads. Machine design features placement
of components for easy access and serviceability
●
●
●
●
●
Operator station offers a spacious and functional layout for operator comfort.
Hydraulically operated quick-hitch allows for efficient changing from one accessory to another without leaving the operator's station.
All wheel steer and rigid frame provide excellent maneuverability and constant payload stability even when turning.
Engine cover lifts high giving excellent access to all the service points.
Low transport weight and constant high payload make this the ideal machine.
wackerneuson.com – 21.11.2012
Page: 1 / 4
850
Wheel Loaders: bucket capacity 0.7-1.8 m³
Technical specifications
Engine / Motor
Engine / Motor manufacturer
Deutz
Engine / Motor type
4-cylinder in-line engine, water-cooled
Engine performance
60.3 hp
at rpm
2,300 rpm
Displacement
221 in³
Operating data
Operating weight
9,921 lb
Speed
0-12.4 mph
Bucket capacity
1.1 yd³
Lifting force
8,992 lb
Breakaway force
7,868 lbf
Payload S=1.25
4,409 lb
Tipping load max.
7,055 lb
Standard tires
12.5-20
Differential lock
Self-locking differentials
Service brake
Hydraulic disc brake
Hydraulic system
Operating hydraulics - operating pressure
3,045.8 psi
Operating hydraulics - discharge capacity
18.75 US gpm
Steering angle max.
2 x 40 °
Filling capacities
Tank capacity
15.8 US gal
Hydraulic oil tank
52.8 US qt
wackerneuson.com – 21.11.2012
Page: 2 / 4
Electrical system
Operating voltage
12 V
Battery
88 Ah
Alternator
95 A
wackerneuson.com – 21.11.2012
Page: 3 / 4
Dimensions
B
Overall length
198.4 in
E
Wheelbase
75.6 in
A
Height
98.8 in
I
Bucket pivot point
127.9 in
J
Overhead loading height max.
122 in
K
Dumping height
98.4 in
C
Overall width
67.7 in
H
Bucket width
72.8 in
D
Ground clearance
11.8 in
Radius Wheel outside edge
100.4 in
F
Center of front axle to tip of teeth
69.7 in
G
Center of rear axle to end of vehicle
53.2 in
Stack height max.
118.1 in
Dump reach
26 in
L
Information on suitable accessories can be found on our website.
The right to make changes is reserved in the interests of ongoing further developments. You can find more information on the engine power in the
operator's manual. The actual power output figures may vary due to specific operating conditions.
Information on suitable accessories can be found on our website. More detailed information on engine power can be found in the operator's manual;
the stated power may vary due to specific operating conditions. Subject to alterations and errors excepted. Applicable also to illustrations.
Copyright © 2012 Wacker Neuson SE.
wackerneuson.com – 21.11.2012
Page: 4 / 4