Atlas Copco Underground drill rigs Boomer E2, L1, L2 and M series rigs Driving instruction Start the engine 1 See Transport instruction Battery switch in position ON (2) 4 2 Parking brake applied (3) Gear selector in position Neutral (4) 3 6 Neutral Pre Heating Start 4s 5 Emergency stop buttons released (5) Jacks, booms and protective roof 7 E 8 Switch for hydraulic pressure (7) in position 1 B A See Boom positioning BUT 32/35 or BUT 45 9 D C D 10 E D C B A Switch for hydraulic pressure (10) in position 0 Atlas Copco Underground drill rigs Boomer E2, L1, L2 and M series rigs Driving instruction Remove locking device 11 Driving Release parking brake (12) 12 Braking pedal Accelerator 13 pedal Select gear (13) Parking and stopping 14 Apply parking brake (14) 15 Gear selector in Neutral (15) 19 Off Battery switch in position Off (20) 18 20 Key in position Off (19) 9852 1872 01b Jacks out and down (18) Booms supported (17) 17 16 Atlas Copco Rock Drills AB ÖREBRO, Sweden © Atlas Copco Rock Drills AB, 2010. All rights reserved
