Catalogo BAE

Energía de baterías
BAE Secura OGi BLOCK
Technical Specification for Stationary VLA-Block Batteries
1. Application
BAE Secura OGi BLOCK batteries are robust and for high discharge-performances
optimised lead-acid batteries. They are particularly suitable for autonomy times
of a few minutes to one hour.
BAE OGi batteries are used for uninterrupted power supplies (UPS), to start diesel
engines and for emergency power supplies in switch stations of utilities, in signal
systems of railway applications or in other stations.
2. Types, capacities, dimensions, weights
Type
C10 h C3 h
20 °C 20 °C
Ah
Ah
C1 h C30 min C10 min
20 °C 20 °C 20 °C
Ah
Ah
Ah
C5 min
20 °C
Ah
C8 h
25 °C
Ah
1.80
1.75
1.70
1.65
1.65
1.65
1.75
12 V 1 OGi 25
12 V 2 OGi 50
12 V 3 OGi 75
12 V 4 OGi 100
12 V 5 OGi 125
12 V 6 OGi 150
30
60
91
112
151
166
23
47
71
90
118
133
18
36
54
69
90
103
15
30
45
58
75
86
10
20
31
40
50
59
7
14
20
27
33
39
6 V 7 OGi 175
6 V 8 OGi 200
6 V 9 OGi 225
6 V 10 OGi 250
6 V 11 OGi 275
6 V 12 OGi 300
206
234
262
289
317
344
163
185
207
230
252
274
124
141
159
176
193
210
103
118
132
147
162
176
69
78
86
95
103
111
555
690
822
425
528
631
355
442
529
234
286
335
Ue
V/cell
2 V 24 OGi 600 703
2 V 30 OGi 750 869
2 V 36 OGi 900 1,030
Ri
1)
mV
Ik
2)
kA
Length Width
(L)
(W)
mm
mm
Height Weight Weight
(H)
dry
filled
mm
kg
kg
30
61
91
113
152
167
16.78
9.11
6.39
5.00
4.19
3.60
0.74
1.37
1.95
2.50
2.99
3.47
272
272
272
272
380
380
205
205
205
205
205
205
385
385
385
385
385
385
22.0
30.0
37.2
44.5
54.5
60.7
35.0
42.0
47.5
54.2
71.5
74.7
44
50
55
60
65
69
208
236
264
292
320
348
1.61
1.44
1.33
1.23
1.15
1.09
3.89
4.32
4.68
5.05
5.40
5.73
272
272
380
380
380
380
205
205
205
205
205
205
385
385
385
385
385
385
34.8
40.0
46.0
50.0
54.0
57.6
48.0
51.0
63.3
67.0
71.0
72.5
150
182
211
708
872
1,040
0.16
0.13
0.12
12.95
15.29
17.38
205
205
205
272
380
380
385
385
385
40.0
50.0
57.6
51.0
67.0
72.5
1, 2) Internal resistance Ri and short circuit current Ik according to IEC 60896-11
Height (H) is the maximum height between container bottom and top of the bolts in assembled condition.
BAE Secura OGi blocks are also available as dry pre-charged version. They are titled with additional “TG”, e.g. 12 V 6 OGi 150 TG.
All values given in the table correspond to 100 % DOD without voltage drop of connectors. Please consider item 6.
3. Terminal positions
12 V 1 OGi 25 to 12 V 6 OGi 150
6 V 7 OGi 175 to 6 V 12 OGi 300
2 V 24 OGi 600 to 2 V 36 OGi 900
Technical Specification for BAE Secura OGi BLOCK
Blocks with blind cells
Plugs
Pole-bushing
Kind of pole
Connectors
Connector screw
Kind of protection
5. Charging
IU-characteristic
Float current
Boost charge
Charging time up to 90 %
6. Discharge characteristics
Reference temperature
Initial capacity
Depth of discharge (DOD)
Deep discharges
7. Maintenance
Every 6 months
Every 12 months
8. Operational data
Service life
Water-refilling-interval
IEC 60896-11 cycles
Self-discharge
Battery temperature
Standard
Tests according to
Safety standard, ventilation
Transport
BAE Batterien GmbH
Wilhelminenhofstraße 69/70
12459 Berlin
Germany
grid-plate with circular bars in a corrosion-resistant low antimony alloy
grid-plate in low antimony alloy with long-life expander material
microporous separator
sulphuric acid with a density of 1.24 kg/l
high impact, transparent SAN (Styrol-Acrylic-Nitrile), UL-94 rating: HB
high impact SAN in grey colour (colour may vary slightly from given image),
UL-94 rating: HB
4 V, 6 V, 8 V, 10 V
labyrinth plugs for arresting aerosols,
optional ceramic plugs or ceramic funnel plugs according to DIN 40740
100 % gas- and electrolyte-tight, sliding, plastic coated “Panzerpol”
M10 brass insertion
flexible insulated copper cables with cross-section of 25, 35, 50, 70, 95 or 120 mm2,
as option: insulated solid copper connectors with cross-section 90, 150 or 300 mm2
M10, steel, insulated, with measuring point
IP 25 regarding EN 60529, touch protected according to VBG 4
Imax without limitation
U = 2.23 V/cell ± 1 %, between 10 °C and 30 °C (50 °F and 86 °F) in the monthly average
otherwise DU/DT = -0.003 V/cell per K
approx. 20 mA/100 Ah C10, increasing to approx. 60 mA/100 Ah C10 at the end of
service life
U = 2.33 to 2.40 V/cell, time limited
6 h with 1.5 x I10 initial current, 2.23 V/cell, 50 % C10 discharged
20 °C (68 °F)
according to IEC 60896-11: 95 % at the 1st cycle, 100 % at the 5th cycle
normally up to 80 %
more than 80 % DOD or discharges beyond final discharge voltages (dependent on
discharge current) have to be avoided
check battery voltage, pilot block voltages, temperatures
record battery and block voltages and temperatures
16 years in stand-by operation, float at 20 °C to 25 °C (68 °F to 77 °F)
>3 years, float at 20 °C to 25 °C (68 °F to 77 °F)
>1,000
approx. 3 % per month at 20 °C (68 °F)
-20 °C to 55 °C (-4 °F to 131 °F)
recommended 10 °C to 30 °C (50 °F to 86 °F)
dimensions according to DIN 40737-3
IEC 60896-11
EN 50272-2
Batteries are not subject to ADR (road transport), if the conditions of Special Provision
598 (Chapter 3.3) are observed.
These cells/batteries are dangerous goods on sea transport. Declaration and
packaging must comply with the requirements of IMDG-Codes.
Tel.: +49 (0)30 53001-661
Fax: +49 (0)30 53001-667
E-Mail: [email protected]
www.bae-berlin.de
12/2012 4804036 Technical details may be subject to alterations.
4. Design
Positive electrode
Negative electrode
Separation
Electrolyte
Container
Lid
BAE Secura OGi
Technical Specification for Stationary VLA-Cells
Similar to the illustration
1. Application
BAE Secura OGi cells are designed for reliable operation, long service life, high
discharge currents during short discharge times and capacitive loads over longer
discharge times.
They are used as stand-by source in power supply stations, transforming stations, UPS-stations and emergency light equipment.
Due to the used grid plate design with high mass of lead and circular bars a long
operational life and a very good high-current-performance can be assured. The
slick-walled containers and the vertical arranged plates offer a high power density related to a small foot-print. The transparent container allows an easy visual
access and simplifies service and maintenance significantly.
2. Types, capacities, dimensions, weights
Type
Ue
V/cell
C10 h C5 h
20 °C 20 °C
Ah
Ah
1.80 1.80
C3 h
20 °C
Ah
1.79
C1 h
20 °C
Ah
1.75
C30 min C10 min C8 h
20 °C 20 °C 25 °C
Ah
Ah
Ah
1.72
1.65 1.75
Ri
1)
mV
Ik
2)
kA
Length Width
(L)
(W)
mm
mm
Height Weight Weight
(H)
dry
filled
mm
kg
kg
8 OGi 200
10 OGi 250
12 OGi 300
14 OGi 350
16 OGi 400
18 OGi 450
234
289
345
397
455
510
206
255
304
350
402
451
183
226
270
312
357
402
140
173
207
239
276
310
115
143
170
197
229
257
79
97
115
132
158
177
236
292
348
400
459
515
0.45
0.38
0.33
0.29
0.23
0.20
4.58
5.47
6.28
7.02
9.25
10.21
103
124
145
145
187
187
206
206
206
206
206
206
420
420
420
420
420
420
14.4
17.2
19.9
22.4
25.3
27.8
18.8
22.6
26.5
28.7
34.0
36.2
5 OGi 400
6 OGi 480
7 OGi 560
8 OGi 640
9 OGi 720
422
506
590
675
710
352
423
493
560
595
306
366
429
489
525
222
266
310
353
385
172
205
239
271
299
100
119
138
156
173
415
498
581
664
701
0.44
0.37
0.32
0.29
0.26
4.71
5.53
6.34
7.08
7.84
145
145
145
145
145
206
206
206
206
206
700
700
700
700
700
27.5
31.3
34.9
38.6
42.3
41.0
44.6
47.8
51.3
54.6
10 OGi 800
11 OGi 880
12 OGi 960
843
910
942
705
760
795
612
666
699
444
483
515
343
374
402
199
218
235
824
896
928
0.22
0.20
0.19
9.23
10.07
10.88
210
210
210
191
191
191
700
700
700
50.9
54.6
58.2
67.7
71.2
74.5
13 OGi 1040
14 OGi 1120
15 OGi 1200
1,090
1,140
1,170
910
960
990
792
837
870
568
608
635
431
467
488
243
267
278
1,080
1,128
1,160
0.19
0.17
0.17
10.66
12.00
12.28
210
210
210
233
233
233
700
700
700
62.7
66.6
70.2
83.5
87.2
90.5
16 OGi 1280
17 OGi 1360
18 OGi 1440
1,340 1,115
1,370 1,155
1,410 1,190
972
1,011
1,047
695
734
768
526
563
596
295
321
344
1,320
1,360
1,392
0.16
0.14
0.13
12.83
14.31
15.59
210
210
210
275
275
275
700
700
700
75.1
78.8
82.4
100.0
103.5
106.8
19 OGi 1520
20 OGi 1600
21 OGi 1680
22 OGi 1760
23 OGi 1840
24 OGi 1920
1,590
1,670
1,750
1,800
1,820
1,860
1,330
1,400
1,470
1,510
1,540
1,575
1,164 846
1,224 889
1,284 932
1,323 966
1,353 996
1,389 1,028
659
691
725
753
780
807
387
406
425
442
460
476
1,568
1,648
1,728
1,768
1,792
1,832
0.11
0.10
0.10
0.10
0.09
0.09
18.45
19.19
20.08
20.82
21.69
22.35
210
210
210
210
210
210
360
360
360
360
360
360
675
675
675
675
675
675
88.7
92.3
95.9
99.7
103.5
106.9
122.0
125.2
128.6
132.0
135.3
138.7
25 OGi 2000
26 OGi 2080
27 OGi 2160
28 OGi 2240
29 OGi 2320
30 OGi 2400
2,080
2,160
2,230
2,260
2,290
2,320
1,745
1,810
1,870
1,900
1,935
1,965
1,521
1,581
1,632
1,665
1,701
1,731
855
886
918
944
972
996
497
514
533
548
567
580
2,048
2,128
2,192
2,224
2,264
2,296
0.09
0.08
0.08
0.08
0.08
0.07
23.05
23.67
24.58
25.20
26.10
26.61
210
210
210
210
210
210
440
440
440
440
440
440
675
675
675
675
675
675
112.8
116.5
120.2
123.9
127.6
131.3
154.1
157.5
160.8
164.1
167.6
170.9
1,104
1,146
1,186
1,216
1,248
1,277
1, 2) Internal resistance Ri and short circuit current Ik according to IEC 60896-11
Height (H) is the maximum height between container bottom and top of the bolts in assembled condition.
All values published in the table correspond to 100 % discharge of current depending capacity without voltage drop of connectors.
3. Terminal positions
8 OGi 200 to 9 OGi 720
10 OGi 800 to 18 OGi 1440
19 OGi 1520 to 30 OGi 2400
Technical Specification for BAE Secura OGi
4. Design
Positive electrode
Negative electrode
Separation
Electrolyte
Container
Lid
Plugs
Pole-bushing
Kind of pole
Connectors
Connector screw
Kind of protection
grid-plate with circular bars in a corrosion-resistant low antimony alloy
grid-plate in low antimony alloy with long-life expander material
microporous separator
sulphuric acid with a density of 1.24 kg/l
high impact, transparent SAN (Styrol-Acrylic-Nitrile), UL-94 rating: HB
high impact SAN in grey colour, UL-94 rating: HB, on request also in ABS (Acrylonitrile-Butadiene-Styrene), UL-94 rating: V-0
labyrinth plugs for arresting aerosols,
recommended BAE ceramic funnel plugs according to DIN 40740 or BAE ceramic plugs
100 % gas- and electrolyte-tight, sliding, plastic coated “Panzerpol”
M10 copper insertion
flexible insulated copper cables with cross-section of 25, 35, 50, 70, 95 or 120 mm2;
on request: insulated solid copper connectors with cross-section 90, 150 or 300 mm2
M10, steel, insulated, with measuring point
IP 25 regarding EN 60529, touch protected according to BGV A3
BAE Secura OGi cells are also available as dry, pre-charged version. They are specifically marked with “TG”,
e.g. 30 OGi 2400 TG.
5. Charging
IU-characteristic
Boost charge
6. Discharge characteristics
Reference temperature
Initial capacity
7. Operational data
Service life
Water-refilling-interval
IEC 60896-11 cycles
Self-discharge
Battery temperature
20 °C (68 °F)
according to IEC 60896-11: 95 % at the 1st cycle, 100 % at the 5th cycle
20 years in stand-by operation, float at 20 °C to 25 °C (68 °F to 77 °F)
>3 years, float at 20 °C to 25 °C (68 °F to 77 °F)
>1,200
approx. 3 % per month at 20 °C (68 °F)
-20 °C to 55 °C (-4 °F to 131 °F)
recommended 10 °C to 30 °C (50 °F to 86 °F)
dimensions according to DIN 40736-1
IEC 60896-11
EN 50272-2
03/2015 4805604 Technical details may be subject to alterations.
Standard
Tests according to
Safety standard, ventilation
Imax without limitation
U = 2.23 V/cell ± 1 %, between 10 °C and 30 °C (50 °F and 86 °F) in the monthly
average, otherwise DU/DT = -0.003 V/cell per K
U = 2.33 to 2.40 V/cell, time limited
BAE Batterien GmbH
Wilhelminenhofstraße 69/70
12459 Berlin
Germany
Tel.: +49 (0)30 53001-661
Fax: +49 (0)30 53001-667
E-Mail: [email protected]
www.bae-berlin.de
BAE Secura OPzS BLOCK
Technical Specification for Stationary VLA-Block Batteries
1. Application
BAE Secura OPzS Block batteries belong to the most enduring lead-acid
batteries. They are suitable for stand-by operations as well as for capacitive loads.
They perfectly meet requirements for autonomy times between 30 min and more
than 10 h.
Fields:
Telecommunications
Emergency lighting
Microwave radio systems
Power generation plants
2. Types, capacities, dimensions, weights
Type
C10 h
20 °C
Ah
C5 h
20 °C
Ah
C3 h
20 °C
Ah
C1 h
20 °C
Ah
C8 h
25 °C
Ah
1.80
1.77
1.75
1.67
1.75
12 V 1 OPzS 50
12 V 2 OPzS 100
12 V 3 OPzS 150
56
109
167
48
95
145
42
84
129
31
63
95
6 V 4 OPzS 200
6 V 5 OPzS 250
6 V 6 OPzS 300
223
279
334
194
242
290
171
214
257
127
159
191
Ue
V/cell
Ri
1)
mV
Ik
2)
kA
Length Width Height Weight Weight
(L)
(W)
(H)
dry
filled
mm
mm
mm
kg
kg
55
108
165
16.62
8.91
6.27
0.75
1.40
1.99
272
272
380
205
205
205
385
385
385
29.5
38.0
51.0
41.0
47.6
69.4
220
276
332
2.47
2.09
1.82
2.52
2.98
3.42
272
380
380
205
205
205
385
385
385
33.0
41.7
48.5
46.5
60.4
66.5
1, 2) Internal resistance Ri and short circuit current Ik according to IEC 60896-11
Height (H) is the maximum height between container bottom and top of the bolts in assembled condition.
BAE Secura OPzS blocks are also available as dry pre-charged version. They are titled with additional “TG”, e.g. 12 V 3 OPzS 150 TG.
All values given in the table correspond to 100 % DOD without voltage drop of connectors. Please consider item 6.
3. Terminal positions
12 V 1 OPzS 50 to 12 V 3 OPzS 150
6 V 4 OPzS 200 to 6 V 6 OPzS 300
Technical Specification for BAE Secura OPzS BLOCK
Negative electrode
Separation
Electrolyte
Container
Lid
Blocks with blind cells
Plugs
Pole-bushing
Kind of pole
Connectors
Connector screw
Kind of protection
5. Charging
IU-characteristic
Float current
Boost charge
Charging time up to 90 %
6. Discharge characteristics
Reference temperature
Initial capacity
Depth of discharge (DOD)
Deep discharges
7. Maintenance
Every 6 months
Every 12 months
8. Operational data
Service life
Water-refilling-interval
IEC 60896-11 cycles
Self-discharge
Battery temperature
Standard
Tests according to
Safety standard, ventilation
Transport
BAE Batterien GmbH
Wilhelminenhofstraße 69/70
12459 Berlin
Germany
tubular-plate with woven polyester gauntlet and solid grids in a corrosion-resistant
PbSbSnSe-low antimony alloy
grid-plate in low antimony alloy with long-life expander material
microporous separator
sulphuric acid with a density of 1.24 kg/l
high impact, transparent SAN (Styrol-Acrylic-Nitrile), UL-94 rating: HB
high impact SAN in grey colour (colour may vary slightly from given image),
UL-94 rating: HB
4 V, 6 V, 8 V, 10 V
labyrinth plugs for arresting aerosols,
optional ceramic plugs or ceramic funnel plugs according to DIN 40740
100 % gas- and electrolyte-tight, sliding, plastic coated “Panzerpol”
M10 brass insertion
flexible insulated copper cables with cross-section of 25, 35, 50, 70, 95 or 120 mm2;
on request: insulated solid copper connectors with cross-section 90, 150 or 300 mm2
M10, steel, insulated, with measuring point
P 25 regarding EN 60529, touch protected according to VBG 4
Imax without limitation
U = 2.23 V/cell ± 1 %, between 10 °C and 30 °C (50 °F and 86 °F) in the monthly average,
otherwise DU/DT = -0.003 V/cell per K
approx. 15 mA/100 Ah C10, increasing to approx. 30 mA/100 Ah C10 at the end of
service life
U = 2.33 to 2.40 V/cell, time limited
6 h with 1.5 x I10 initial current, 2.23 V/cell, 50 % C10 discharged
20 °C (68 °F)
according to IEC 60896-11: 95 % at the 1st cycle, 100 % at the 5th cycle
normally up to 80 %
more than 80 % DOD or discharges beyond final discharge voltages (dependent on
discharge current) have to be avoided
check battery voltage, pilot block voltages, temperatures
record battery and block voltages and temperatures
18 years in stand-by operation, float at 20 °C to 25 °C (68 °F to 77 °F)
>3 years, float at 20 °C to 25 °C (68 °F to 77 °F)
>1,200
approx. 3 % per month at 20 °C (68 °F)
-20 °C to 55 °C (-4 °F to 131 °F)
recommended 10 °C to 30 °C (50 °F to 86 °F)
DIN 40737-3
IEC 60896-11
EN 50272-2
Batteries are not subject to ADR (road transport), if the conditions of Special Provision
598 (Chapter 3.3) are observed.
These cells/batteries are dangerous goods on sea transport. Declaration and
packaging must comply with the requirements of IMDG-Codes.
Tel.: +49 (0)30 53001-661
Fax: +49 (0)30 53001-667
E-Mail: [email protected]
www.bae-berlin.de
12/2012 4804034 Technical details may be subject to alterations.
4. Design
Positive electrode
BAE Secura OPzS
Technical Specification for Stationary VLA-Cells
Similar to the illustration
1. Application
BAE Secura OPzS batteries belong to the most enduring lead-acid batteries. They
are suitable for stand-by operations as well as for capacitive loads. They perfectly
meet requirements for autonomy times between 1 h and more than 10 h.
Fields:
Telecommunications
Emergency lighting
Microwave radio systems
Power generation plants
2. Types, capacities, dimensions, weights
Type
C10 h
20 °C
Ah
C5 h
20 °C
Ah
C3 h
20 °C
Ah
C1 h
20 °C
Ah
C8 h
25 °C
Ah
1.80
1.77
1.75
1.67
1.75
2 OPzS 100
3 OPzS 150
4 OPzS 200
5 OPzS 250
6 OPzS 300
111
167
223
279
334
97
145
193
242
290
86
129
171
214
257
63
95
127
159
191
5 OPzS 350
6 OPzS 420
7 OPzS 490
389
467
544
346
414
483
306
366
429
6 OPzS 600
7 OPzS 700*
8 OPzS 800
9 OPzS 900*
10 OPzS 1000
11 OPzS 1100*
12 OPzS 1200
665
777
886
992
1,100
1,210
1,320
580
675
770
860
960
1,050
1,150
11 OPzS 1375*
12 OPzS 1500
13 OPzS 1625*
14 OPzS 1750
15 OPzS 1875*
16 OPzS 2000
17 OPzS 2125*
18 OPzS 2250
19 OPzS 2375*
20 OPzS 2500
22 OPzS 2750
24 OPzS 3000
26 OPzS 3250
1,470
1,600
1,740
1,880
2,010
2,140
2,290
2,420
2,560
2,690
2,950
3,220
3,480
1,295
1,415
1,550
1,665
1,780
1,900
2,030
2,150
2,265
2,380
2,615
2,845
3,080
Ue
V/cell
Ri
1)
mV
Ik
2)
kA
Length Width Height Weight Weight
(L)
(W)
(H)
dry
filled
mm
mm
mm
kg
kg
110
165
220
276
332
1.52
1.06
0.84
0.70
0.60
1.37
1.96
2.46
2.98
3.47
105
105
105
126
147
208
208
208
208
208
420
420
420
420
420
9.1
11.2
12.8
15.3
18.1
14.5
16.4
18.0
21.7
25.7
223
267
310
392
470
548
0.57
0.49
0.44
3.61
4.18
4.69
126
147
168
208
208
208
535
535
535
20.0
23.5
26.8
28.8
34.0
39.1
504
594
675
753
840
918
1,005
352
415
473
522
585
635
698
670
781
888
1,000
1,112
1,216
1,328
0.47
0.36
0.32
0.33
0.28
0.28
0.24
4.41
5.66
6.36
6.20
7.25
7.36
8.41
147
215
215
215
215
215
215
208
193
193
235
235
277
277
710
710
710
710
710
710
710
33.0
42.1
46.6
51.4
56.0
61.0
65.4
47.4
61.5
65.4
75.4
79.4
89.6
93.4
1,137
1,245
1,371
1,473
1,578
1,680
1,797
1,899
2,004
2,106
2,307
2,514
2,715
790
869
978
1,051
1,123
1,195
1,280
1,352
1,425
1,496
1,635
1,777
1,917
1,496
1,632
1,768
1,904
2,032
2,168
2,320
2,456
2,592
2,728
2,992
3,264
3,536
0.24
0.22
0.16
0.15
0.14
0.13
0.12
0.11
0.11
0.11
0.10
0.09
0.09
8.38
9.48
13.03
13.82
14.43
15.20
16.91
17.55
18.36
18.92
19.92
21.26
22.49
215
215
215
215
215
215
215
215
215
215
215
215
215
277
277
400
400
400
400
490
490
490
490
580
580
580
855
855
815
815
815
815
815
815
815
815
815
815
815
72.7
77.4
90.8
95.3
100.2
105.4
117.7
121.9
126.8
132.0
145.4
155.2
165.0
105.9
110.4
137.8
142.4
146.9
151.6
175.1
179.1
183.6
188.3
213.9
223.0
232.0
1, 2) Internal resistance Ri and short circuit current Ik according to IEC 60896-11 * Special type based on DIN 40736-1
Height (H) is the maximum height between container bottom and top of the bolts in assembled condition.
All values published in the table correspond to 100 % discharge of current depending capacity without voltage drop of connectors.
3. Terminal positions
2 OPzS 100 to 6 OPzS 600
7 OPzS 700 to 12 OPzS 1500
13 OPzS 1625 to 16 OPzS 2000
17 OPzS 2125 to 26 OPzS 3250
Technical Specification for BAE Secura OPzS
4. Design
Positive electrode
Negative electrode
Separation
Electrolyte
Container
Lid
Plugs
Pole-bushing
Kind of pole
Connectors
Connector screw
Kind of protection
tubular-plate with woven polyester gauntlet and solid grids in a
corrosion-resistant PbSbSnSe-low antimony alloy
grid-plate in low antimony alloy with long-life expander material
microporous separator
sulphuric acid with a density of 1.24 kg/l (20 °C / 68 °F)
high impact, transparent SAN (styrene-acrylonitrile resin),
UL-94 rating: HB
high impact plastic lid in grey colour, UL-94 rating: HB,
on request also in ABS (Acrylonitrile-Butadiene-Styrene), UL-94 rating: V-0
labyrinth plugs for arresting aerosols,
recommended BAE ceramic funnel plugs according to DIN 40740 or BAE ceramic plugs
100 % gas- and electrolyte-tight, sliding, plastic coated “Panzerpol”
M10 brass insertion
flexible insulated copper cables with cross-section of 25, 35, 50, 70, 95 or 120 mm2;
on request: insulated solid copper connectors with cross-section 90, 150 or 300 mm2
M10, steel, insulated, with measuring point
IP 25 regarding EN 60529, touch protected according to BGV A3
BAE Secura OPzS cells are also available as dry, pre-charged version. They are specifically marked with „TG“,
e.g. 12 OPzS 1500 TG.
Boost charge
6. Discharge characteristics
Reference temperature
Initial capacity
7. Operational data
Service life
Water-refilling-interval
IEC 60896-11 cycles
Self-discharge
Battery temperature
Standard
Tests according to
Safety standard, ventilation
BAE Batterien GmbH
Wilhelminenhofstraße 69/70
12459 Berlin
Germany
Imax without limitation
U = 2.23 V/cell ± 1 %, between 10 °C and 30 °C (50 °F and 86 °F) in the monthly average,
otherwise DU/DT = -0.003 V/K
U = 2.33 to 2.40 V/cell, time limited
20 °C (68 °F)
according to IEC 60896-11: 95 % at the 1st cycle, 100 % at the 5th cycle
20+ years in stand-by operation, float at 20 °C to 25 °C (68 °F to 77 °F)
>3 years, float at 20 °C to 25 °C (68 °F to 77 °F)
>1,500
approx. 3 % per month at 20 °C (68 °F)
-20 °C to 55 °C (-4 °F to 131 °F),
recommended 10 °C to 30 °C (50 °F to 86 °F)
DIN 40736-1 (except * marked cells)
IEC 60896-11
EN 50272-2
Tel.: +49 (0)30 53001-661
Fax: +49 (0)30 53001-667
E-Mail: [email protected]
www.bae-berlin.de
03/2015 4805603 Technical details may be subject to alterations.
5. Charging
IU-characteristic
BAE Secura OPzV BLOCK
Technical Specification for Stationary VRLA-GEL-Block Batteries
1. Application
BAE Secura OPzV Block batteries belong to the highest EUROBAT classification
for maintenance-free lead-acid batteries: >12 years long life.
In applications with high requirements of operational safety and autonomy times
of 1 h to more than 10 h, the BAE Secura OPzV Blocks are the right choice. They
are used as stand-by power sources in telecommunications, in microwave radio
systems, emergency lighting and other equipments.
2. Types, capacities, dimensions, weights
Type
C10 h
20 °C
Ah
C5 h
20 °C
Ah
C3 h
20 °C
Ah
C1 h
20 °C
Ah
C8 h
25 °C
Ah
1.80
1.77
1.75
1.67
1.75
12 V 1 OPzV 50
12 V 2 OPzV 100
12 V 3 OPzV 150
60
110
167
53
99
149
48
89
135
35
68
103
6 V 4 OPzV 200
6 V 5 OPzV 250
6 V 6 OPzV 300
224
281
337
200
251
301
181
227
273
2 V 12 OPzV 600
2 V 15 OPzV 750
2 V 18 OPzV 900
674
844
1,010
600
750
905
543
681
819
Ue
V/cell
Ri
1)
mV
Ik
2)
kA
Length
(L)
mm
Width
(W)
mm
Height Weight
(H)
mm
kg
60
109
166
17.47
9.55
6.74
0.73
1.34
1.91
272
272
380
205
205
205
385
385
385
43.0
52.0
74.2
137
172
207
222
279
335
2.66
2.24
1.94
2.42
2.87
3.31
272
380
380
205
205
205
385
385
385
51.0
65.0
73.8
413
517
622
668
832
1,000
0.29
0.24
0.21
7.33
8.81
10.18
205
205
205
272
380
380
385
385
385
51.0
65.0
73.8
1, 2) Internal resistance Ri and short circuit current Ik according to IEC 60896-21
Height (H) is the maximum height between container bottom and top of the bolts in assembled condition.
All values given in the table correspond to 100 % DOD without voltage drop of connectors. Please consider item 6.
3. Terminal positions
12 V 1 OPzV 50 to 12 V 3 OPzV 150
6 V 4 OPzV 200 to 6 V 6 OPzV 300
2 V 12 OPzV 600 to 2 V 18 OPzV 900
Technical Specification for BAE Secura OPzV BLOCK
Negative electrode
Separation
Electrolyte
Container and lid
Blocks with blind cells
Valve
Pole-bushing
Kind of pole
Connectors
Connector screw
Kind of protection
Horizontal operation
5. Charging
IU-characteristic
Float current
Boost charge
Charging time up to 92 %
6. Discharge characteristics
Reference temperature
Initial capacity
Depth of discharge (DOD)
Deep discharges
7. Maintenance
Every 6 months
Every 12 months
8. Operational data
Classification according to
EUROBAT
Service life
Maintenance-free
IEC 60896-21 cycles
Self-discharge
Battery temperature
Deep discharge recovery
Standard
Tests according to
Safety standard, ventilation
Transport
BAE Batterien GmbH
Wilhelminenhofstraße 69/70
12459 Berlin
Germany
tubular-plate with woven polyester gauntlet and solid grids in a corrosion-resistant
PbCaSn-alloy
grid-plate in PbCaSn-alloy with long-life expander material
microporous separator
sulphuric acid with a density of 1.24 kg/l, fixed as GEL by fumed silica
high impact SAN (Styrol-Acrylic-Nitrile), grey coloured (colour may vary slightly from
given image), UL-94 rating: HB
on request also in ABS (Acrylonitrile-Butadiene-Styrene), UL-94 rating: V-0
4 V, 6 V, 8 V, 10 V
one valve per cell with flame arrestor, opening pressure approx. 120 mbar
100 % gas- and electrolyte-tight, sliding, plastic coated “Panzerpol”
M10 brass insertion
flexible insulated copper cables with cross-section of 25, 35, 50, 70, 95 or 120 mm²,
on request: insulated solid copper connectors with cross-section 90, 150 or 300 mm²
M10, steel, insulated, with measuring point
IP 25 regarding EN 60529, touch protected according to VBG 4
Please use BAE special type OPzV “horizontal”. The construction and production of
this type is adapted to the horizontal operation.
Imax without limitation
U = 2.25 V/cell ± 1 %, between 10 °C and 45 °C (50 °F and 113 °F) in the monthly
average, DU/DT = -0.003 V/cell per K below 10 °C (50 °F)
20 - 30 mA/100 Ah C10
U = 2.33 to 2.40 V/cell, time limited
6 h with 1.5 x I10 initial current, 2.25 V/cell, 50 % C10 discharged
20 °C (68 °F)
according to IEC 60896-21: 95 % at the 1st cycle, 100 % at the 5th cycle
normally up to 80 %
more than 80 % DOD or discharges beyond final discharge voltages (dependent on
discharge current) have to be avoided
check battery voltage, pilot block voltages, temperatures
record battery and block voltages and temperatures
12 years and longer - long life
18 years in stand-by operation, float at 20 °C to 25 °C (68 °F to 77 °F)
no topping up during life
>1,500
approx. 2 % per month at 20 °C (68 °F)
-20 °C to 45 °C (-4 °F to 113 °F)
recommended 10 °C to 30 °C (50 °F to 86 °F)
short time 45 °C to 55 °C (113 °F to 131 °F)
very good
DIN 40744
IEC 60896-21, -22
EN 50272-2, Ventilation requirements are reduced to 20 % compared to those for
vented batteries of the same capacity.
Batteries are not subject to ADR (road transport), if the conditions of Special
Provisions 598 and 238 (Chapter 3.3) are observed.
BAE cells/batteries are conform to the IMDG-Code, therefore these products are no
dangerous goods on sea transport.
Tel.: +49 (0)30 53001-661
Fax: +49 (0)30 53001-667
E-Mail: [email protected]
www.bae-berlin.de
12/2012 4804035 Technical details may be subject to alterations.
4. Design
Positive electrode
BAE Secura OPzV
Technical Specification for Stationary VRLA-GEL-Cells (DIN 40742)
1. Application
BAE OPzV batteries belong to the highest EUROBAT classification
for maintenance-free lead-acid batteries: >12 years long life.
In applications with high requirements of operational safety and
autonomy times of 1 h to more than 10 h, the BAE OPzV batteries
are the right choice. They are used as stand-by power sources in
telecommunications, in microwave radio systems, emergency
lighting, power generation plants and other equipments.
2. Types, capacities, dimensions, weights
Type
C10 h
20 °C
Ah
C5 h
20 °C
Ah
C3 h
20 °C
Ah
C1 h
20 °C
Ah
C8 h
25 °C
Ah
1.80
1.77
1.75
1.67
1.75
2 OPzV 100*
3 OPzV 150*
4 OPzV 200
5 OPzV 250
6 OPzV 300
121
182
243
304
364
107
161
214
268
322
96
144
192
240
288
71
107
143
179
215
5 OPzV 350
6 OPzV 420
7 OPzV 490
447
529
610
388
459
530
342
405
468
6 OPzV 600
7 OPzV 700*
8 OPzV 800
9 OPzV 900*
10 OPzV 1000
11 OPzV 1100*
12 OPzV 1200
729
858
970
1,090
1,200
1,320
1,440
630
740
840
945
1,045
1,145
1,245
11 OPzV 1375*
12 OPzV 1500
13 OPzV 1625*
14 OPzV 1750*
15 OPzV 1875*
16 OPzV 2000
17 OPzV 2125*
18 OPzV 2250*
19 OPzV 2375*
20 OPzV 2500
22 OPzV 2750*
24 OPzV 3000
26 OPzV 3250*
1,570
1,710
1,890
2,070
2,170
2,300
2,480
2,610
2,740
2,870
3,210
3,470
3,650
1,375
1,495
1,660
1,810
1,900
2,015
2,170
2,290
2,405
2,520
2,805
3,035
3,210
Ue
V/cell
Ri
1)
mV
Ik
2)
kA
Length
(L)
mm
Width
(W)
mm
Height
(H)
mm
Weight
filled
kg
120
180
240
300
360
1.65
1.15
0.89
0.73
0.63
1.30
1.86
2.40
2.91
3.39
105
105
105
126
147
208
208
208
208
208
420
420
420
420
420
12.4
17.1
19.4
23.3
27.4
254
302
350
440
521
601
0.68
0.58
0.52
3.14
3.64
4.12
126
147
168
208
208
208
535
535
535
31.4
36.9
42.4
564
663
750
840
933
1,020
1,113
417
492
559
616
691
748
822
718
840
952
1,072
1,192
1,304
1,416
0.46
0.36
0.32
0.34
0.28
0.28
0.24
4.63
5.81
6.54
6.29
7.50
7.56
8.63
147
215
215
215
215
215
215
208
193
193
235
235
277
277
710
710
710
710
710
710
710
51.0
61.9
68.8
77.0
83.9
92.2
99.2
1,209
1,317
1,461
1,590
1,677
1,779
1,911
2,016
2,121
2,223
2,466
2,670
2,832
839
927
1,040
1,125
1,191
1,265
1,358
1,433
1,507
1,581
1,740
1,887
2,014
1,576
1,704
1,880
2,056
2,160
2,288
2,464
2,600
2,728
2,864
3,192
3,456
3,640
0.27
0.23
0.18
0.17
0.16
0.15
0.14
0.13
0.12
0.12
0.11
0.10
0.10
7.86
9.18
11.91
12.63
13.25
13.94
15.32
16.03
16.70
17.37
18.43
19.76
21.02
215
215
215
215
215
215
215
215
215
215
215
215
215
277
277
400
400
400
400
490
490
490
490
580
580
580
855
855
815
815
815
815
815
815
815
815
815
815
815
108.2
116.5
131.4
141.2
147.9
156.2
173.6
181.4
189.6
197.8
205.7
222.0
235.1
1, 2) Internal resistance Ri and short circuit current Ik according to IEC 60896-21 * Special type based on DIN 40742
Height (H) is the maximum height between container bottom and top of the bolts in assembled condition.
All values given in the table correspond to 100 % DOD without voltage drop of connectors. Please consider item 6.
3. Terminal positions
2 OPzV 100 to 6 OPzV 600
7 OPzV 700 to 12 OPzV 1500
13 OPzV 1625 to 16 OPzV 2000
17 OPzV 2125 to 26 OPzV 3250
Technical Specification for BAE Secura OPzV
Negative electrode
Separation
Electrolyte
Container and lid
Valve
Pole-bushing
Kind of pole
Connectors
Connector screw
Kind of protection
Horizontal operation
5. Charging
IU-characteristic
Float current
Boost charge
Charging time up to 92 %
6. Discharge characteristics
Reference temperature
Initial capacity
Depth of discharge (DOD)
Deep discharges
7. Maintenance
Every 6 months
Every 12 months
8. Operational data
Classification acc. to EUROBAT
Service life
Maintenance-free
IEC 60896-21 cycles
Self-discharge
Battery temperature
Deep discharge recovery
Standard
Tests according to
Safety standard, ventilation
Transport
BAE Batterien GmbH
Wilhelminenhofstraße 69/70
12459 Berlin
Germany
tubular-plate with woven polyester gauntlet and solid grids in a corrosion-resistant
PbCaSn-alloy
grid-plate in PbCaSn-alloy with long-life expander material
microporous separator
sulphuric acid with a density of 1.24 kg/l, fixed as GEL by fumed silica
high impact ABS (Acrylonitrile-Butadiene-Styrene), grey coloured (colour may vary
slightly from given image), UL-94 rating: HB;
on request also in UL-94 rating: V-0
valve with flame arrestor, opening pressure approx. 120 mbar
100 % gas- and electrolyte-tight, sliding, plastic coated “Panzerpol”
M10 brass insertion
flexible insulated copper cables with cross-section of 25, 35, 50, 70, 95 or 120 mm2;
on request: insulated solid copper connectors with cross-section 90, 150 or 300 mm2
M10, steel, insulated, with measuring point
IP 25 regarding EN 60529, touch protected according to VBG 4
Please use BAE special type OPzV “horizontal”. The construction and production of this
type is adapted to the horizontal operation.
Imax without limitation
U = 2.25 V/cell ± 1 %, between 10 °C and 45 °C (50 °F and 113 °F) in the monthly average,
DU/DT = -0.003 V/cell per K below 10 °C (50 °F)
20 - 30 mA/100 Ah C10
U = 2.33 to 2.40 V/cell, time limited
6 h with 1.5 x I10 initial current, 2.25 V/cell, 50 % C10 discharged
20 °C (68 °F)
according to IEC 60896-21: 95 % at the 1st cycle, 100 % at the 5th cycle
normally up to 80 %
more than 80 % DOD or discharges beyond final discharge voltages (dependent on
discharge current) have to be avoided
check battery voltage, pilot cell voltages, temperatures
record battery and cell voltages and temperatures
12 years and longer - long life
20 years in stand-by operation, float at 20 °C to 25 °C (68 °F to 77 °F)
no topping up during life
>1,500
approx. 2 % per month at 20 °C (68 °F)
-20 °C to 45 °C (-4 °F to 113 °F)
recommended 10 °C to 30 °C (50 °F to 86 °F)
short time 45 °C to 55 °C (113 °F to 131 °F)
very good
DIN 40742 (except * marked cells)
IEC 60896-21, -22
EN 50272-2, Ventilation requirements are reduced to 20 % compared to those for
vented batteries of the same capacity.
Batteries are not subject to ADR (road transport), if the conditions of Special
Provisions 598 and 238 (Chapter 3.3) are observed.
BAE cells/batteries are conform to the IMDG-Code, therefore these products
are no dangerous goods on sea transport.
Tel.: +49 (0)30 53001-661
Fax: +49 (0)30 53001-667
E-Mail: [email protected]
www.bae-berlin.de
12/2012 4804068 Technical details may be subject to alterations.
4. Design
Positive electrode
BAE Secura OGiV BLOCK
Technical Specification for Stationary VRLA-GEL-Block Batteries
1. Application
BAE Secura OGiV BLOCK batteries belong to the highest EUROBAT classification
for maintenance-free lead-acid batteries: >12 years long life.
In applications with high requirements of operational safety and autonomy times
of 15 min to several hours, BAE Secura OGiV Blocks are the right choice.
They are used as reserve power in telecommunications, radio relay systems, switching stations of utilities, emergency light equipment and uninterrupted power
supplies.
2. Types, capacities, dimensions, weights
Type
C10 h
20 °C
Ah
C5 h
20 °C
Ah
C3 h
C1 h C30 min C10 min
20 °C 20 °C 20 °C 20 °C
Ah
Ah
Ah
Ah
C8 h
25 °C
Ah
1.80
1.79
1.78
1.74
1.70
1.60
1.75
12 V 1 OGiV 25
12 V 2 OGiV 50
12 V 3 OGiV 75
12 V 4 OGiV 100
12 V 5 OGiV 125
12 V 6 OGiV 150
26
52
78
105
131
157
24
48
72
96
121
145
22
45
67
90
112
135
18
36
55
73
92
110
15
31
47
62
78
94
11
22
34
45
57
68
6 V 7 OGiV 175
6 V 8 OGiV 200
6 V 9 OGiV 225
6 V 10 OGiV 250
6 V 11 OGiV 275
6 V 12 OGiV 300
183
210
236
262
288
315
169
193
217
242
266
290
157
180
202
225
247
269
128
147
165
184
203
221
110
125
141
156
172
187
2 V 24 OGiV 600
2 V 30 OGiV 750
2 V 36 OGiV 900
630
787
945
580
725
870
540
675
807
442
553
664
376
470
563
Ue
V/cell
Ri
1)
mV
Ik
2)
kA
Length
(L)
mm
Width Height Weight
(W)
(H)
mm
mm
kg
26
52
79
104
131
157
17.96
9.70
6.77
5.27
4.38
3.75
0.71
1.32
1.90
2.44
2.93
3.43
272
272
272
272
380
380
205
205
205
205
205
205
385
385
385
385
385
385
35.0
44.0
53.0
62.0
84.0
93.0
79
89
100
110
121
131
184
210
236
263
289
316
1.66
1.49
1.37
1.26
1.18
1.10
3.86
4.31
4.69
5.08
5.46
5.82
272
272
380
380
380
380
205
205
205
205
205
205
385
385
385
385
385
385
53.0
57.0
73.0
78.0
81.0
85.0
269
333
395
632
790
944
0.16
0.13
0.12
12.91
15.39
17.63
205
205
205
272
380
380
385
385
385
57.0
78.0
85.0
1, 2) Internal resistance Ri and short circuit current Ik from IEC 60896-21
Height (H) is the maximum height between container bottom and top of the bolts in assembled condition.
All values given in the table correspond to 100 % DOD without voltage drop of connectors. Please consider item 6.
3. Terminal positions
12 V 1 OGiV 25 to 12 V 6 OGiV 150
6 V 7 OGiV 175 to 6 V 12 OGiV 300
2 V 24 OGiV 600 to 2 V 36 OGiV 900
Technical Specification for BAE Secura OGiV BLOCK
Blocks with blind cells
Valve
Pole-bushing
Kind of pole
Connectors
Connector screw
Kind of protection
Horizontal operation
5. Charging
IU-characteristic
Float current
Boost charge
Charging time up to 92 %
6. Discharge characteristics
Reference temperature
Initial capacity
Depth of discharge (DOD)
Deep discharges
7. Maintenance
Every 6 months
Every 12 months
8. Operational data
Classification according to
EUROBAT
Service life
Maintenance-free
IEC 60896-21 cycles
Self-discharge
Battery temperature
Standard
Tests according to
Safety standard, ventilation
Transport
BAE Batterien GmbH
Wilhelminenhofstraße 69/70
12459 Berlin
Germany
grid-plate with circular bars in a corrosion-resistant PbCaSn-alloy
grid-plate in PbCaSn-alloy with long-life expander material
microporous separator
sulphuric acid with a density of 1.24 kg/l, fixed as GEL by fumed silica
high impact SAN (Styrol-Acrylic-Nitrile), grey coloured (colour may vary slightly from
given image), UL-94 rating: HB
on request also in ABS (Acrylonitrile-Butadiene-Styrene), UL-94 rating: V-0
4 V, 6 V, 8 V, 10 V
one valve per cell with flame arrestor, opening pressure approx. 120 mbar
100 % gas- and electrolyte-tight, sliding, plastic coated “Panzerpol”
M10 brass insertion
flexible insulated copper cables with cross-section of 25, 35, 50, 70, 95 or 120 mm2,
on request: insulated solid copper connectors with cross-section 90, 150 or 300 mm2
M10, steel, insulated, with measuring point
IP 25 regarding EN 60529, touch protected according to VBG 4
Please use BAE special type OGiV “horizontal”. The construction and production of this
type is adapted to the horizontal operation.
Imax without limitation
U = 2.25 V/cell ± 1 %, between 10 °C and 45 °C (50 °F and 113 °F) in the monthly average, DU/DT = -0.003 V/cell per K below 10 °C (50 °F)
20 - 30 mA/100 Ah C10
U = 2.33 to 2.40 V/cell, time limited
6 h with 1.5 x I10 initial current, 2.25 V/cell, 50 % C10 discharged
20 °C (68 °F)
according to IEC 60896-21: 95 % at the 1st cycle, 100 % at the 5th cycle
normally up to 80 %
more than 80 % DOD or discharges beyond final discharge voltages (dependent on
discharge current) have to be avoided
check battery voltage, pilot block voltages, temperatures
record battery and block voltages and temperatures
12 years and longer - long life
15 years in stand-by operation, float at 20 °C to 25 °C (68 °F to 77 °F)
no topping-up during life
>800
approx. 2 % per month at 20 °C (68 °F)
-20 °C to 45 °C (-4 °F to 113 °F)
recommended 10 °C to 30 °C (50 °F to 86 °F)
short time 45 °C to 55 °C (113 °F to 131 °F)
dimensions according to DIN 40737-3
IEC 60896-21, -22
EN 50272-2, Ventilation requirements are reduced to 20 % compared to those for
vented batteries of the same capacity.
Batteries are not subject to ADR (road transport), if the conditions of Special
Provisions 598 and 238 (Chapter 3.3) are observed.
BAE cells/batteries are conform to the IMDG-Code, therefore these products are
no dangerous goods on sea transport.
Tel.: +49 (0)30 53001-661
Fax: +49 (0)30 53001-667
E-Mail: [email protected]
www.bae-berlin.de
12/2012 4804037 Technical details may be subject to alterations.
4. Design
Positive electrode
Negative electrode
Separation
Electrolyte
Container and lid