EN 12004 requirements for cement base tiles adhesives Adhesive category Initial tensile adhesion strength after 28 days under regular conditions Tensile adhesion strength after heat ageing at +70 oC for 14 days Tensile adhesion strength after water immersion for 14 days Tensile adhesion strength after 25 freezethaw cycles Tile installation open time C2 SKW 112 C1 With regular features, for absorbent tiles and common substrates – Indoor and outdoor use. Description With regular features With reinforced features SKW 114 C1T With regular features, for absorbent tiles and common substrates – Slip resistance. SKW 116 C1TE > 0,5 N/mm2 > 1 N/mm2 With regular features, for absorbent tiles and common substrates. With slip resistance and increased open time. EN 1348 VKW 120 C2 With reinforced features, for non absorbent tiles - Indoor and outdoor use. EN 1348 2 > 0,5 N/mm 2 > 1 N/mm VKW 121 C2E EN 1348 > 0,5 N/mm2 > 1 N/mm2 MKW 136 C2T EN 1348 2 > 0,5 N/mm 2 > 1 N/mm VKW 124 / 126 C2TE EN 1346 > 20 min > 20 min VKW 128 C2TE-S1 VKW 132 C2TE-S2 FKW 134 C2FT VKW 142 D2TE VKW 145 R2T Have not been measurements for: Technical characteristics Detachment strength after 28 days at regular conditions* • Heat ageing at +70 oC for 14 days Adhesion •Water immersion for via 14 days shearing after • Stain at high temperature •Thermal shocks Tile installation open time Control method EN 1308 EN 1346 Requirement < 0,5 mm > 30 min EN 1348 > 0,5 N/mm2 Control method Reacting resin adhesives R2: R1: Normal Reinforced Minimum requirement ≥ 1,00 N/mm2 ≥ 1,00 N/mm2 ≥ 1,00 N/mm2 ≥ 1,00 N/mm2 ≥ 0,50 N/mm2 D: EN 1324 R: EN 12003 ≥ 2,00 N/mm2 ≥ 2,00 N/mm2 ≥ 2,00 N/mm2 ≥ 2,00 N/mm2 Adhesive type Symbol Description Control method CG1 With regular features Requirement CG2 With reinforced features Requirement EN 12808-3 > 15,0 N/mm2 > 15,0 N/mm2 EN 12808-3 > 3,5 N/mm2 > 3,5 N/mm2 EN 12808-3 > 15,0 N/mm2 > 15,0 N/mm2 EN 12808-3 > 3,5 N/mm2 > 3,5 N/mm2 EN 12808-4 < 2 mm/m < 1,5 mm/m EN 12808-5 ≤5g ≤2g EN 12808-5 ≤ 10 g Technical characteristics Crushing tolerance after 28 days Bending tolerance after 28 days Crushing tolerance after 25 freeze-thaw cycles to: Bending tolerance after 25 freeze-thaw cycles to: Shrinkage Absorption water after 30 min: Absorption water after 240 min: Abrasion resistance EN 12808-2 Tile grouts THRAKON Category FMF 150 CG2 FMF 160 LUX CG2 FMF 155 RG ≤5g 3 < 2000 mm < 1000 mm3 2 ≥ 1,00 N/mm ≥ 2,00 N/mm2 EN 1346 ≥ 20 min ≥ 20 min ≥ 20 min ≥ 20 min EN 12002 requirements for elastic tile adhesives Lateral deflection With reinforced features for non absorbent tiles and increased open time - Indoor and outdoor use. With reinforced features for non absorbent tiles and slip resistance – Indoor and outdoor use. With reinforced features for non absorbent tiles, with slip resistance and increased open time – Elastic - Indoor and outdoor use. With reinforced features for non absorbent tiles, with slip resistance and increased open time – Very elastic - Indoor and outdoor use. With reinforced features for non absorbent tiles, with slip resistance and increased open time – Super elastic - Indoor and outdoor use. Fast setting with reinforced features for non absorbent tiles, with slip resistance Indoor and outdoor use. Dispersion adhesive with reinforced features for all tiles, with slip resistance and increased open time. Indoor and outdoor use. Epoxy adhesive with reinforced features for all tiles and with slip resistance. Indoor and outdoor use. EN 13888 demands for cement base tile grouts EN 1346 > 10 min a) Detachment strength after 25 freeze-thaw cycles b) Detachment strength after heat ageing at +70 oC for 14 days Dispersion adhesive D2: D1: Normal Reinforced EN 1348 Description C1 Technical characteristics Symbol Description T Vertical slip E Open application time Tensile adhesion strength in 24 hours F Open application time Adhesive type Category Symbol Special characteristics for tile adhesives NPD Adhesive tiles THRAKON Symbol S1 S2 Description 2,5mm ≤ S < 5mm S > 5mm Description With reinforced features for demanding applications, high tolerance friction, low water absorption and shrinkage - Interior and exterior application. With reinforced features for demanding applications, high tolerance friction, low water absorption and shrinkage Interior and exterior application. Reinforced epoxy grout with high mechanical strength, resistance to weathering resistance to acids, alkalis and many organic solvents, also in water and saline water.
