Compression Lugs

s
U.S. Cat. No. Euro Order No.
item: _CLD20 3VL9220-4TM_1
_CLF350 3VL9335-4TM_1
Compression Lugs
Bornes de Compresión
Connexion Compression
For Use With Frame DG, FG
Para Usar Con Caja Base DG, FG
Installation Instructions / Instructivo de Instalación
Hazardous Voltage.
Will cause death or serious injury.
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Turn off and lock out all power supplying this device before Desenergice totalmente antes de instalar o darle servicio.
working on this device.
Reemplace todas las barreras y cubiertas antes de
Replace all covers before power supplying this device is
energizar el interruptor.
turned on.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté.
Use only with Siemens certified Components.
Utilizar únicamente con componentes certificados de Siemens.
A utiliser uniquement avec les composants certifiés Siemens.
5/32“
1/4“
Cal. ISO 6789
NOTE - These instructions do not purport to cover all details or variations in equipment, or to provide for every possible
contingency to be met in connection with installation, operation or maintenance. Should further information be desired or
should particular problems arise, which are not covered sufficiently for the purchaser’s purposes, the matter should be
referred to the local Siemens sales office. The contents of this instruction manual shall not become part of or modify any
prior or existing agreement, commitment or relationship. The sales contract contains the entire obligation of Siemens.
The warranty contained in the contract between the parties is the sole warranty of Siemens. Any statements contained
herein do not create new warranties or modify the existing warranty.
Trademarks - Unless otherwise noted, all names identified by ® are registered trademarks of Siemens AG or Siemens
Industry, Inc. The remaining trademarks in this publication may be trademarks whose use by third parties for their own
purposes could violate the rights of the owner.
-2X
-3X
-2X
-2X
2CLF350 /3VL9335-4TM21
-2X
-3X
3 X – 5/16”-18 UNC X .75”
3CLF350 /3VL9335-4TM31
1/3
8 0 6 8 5 4 A 0 2
-4X
4 X - 10-32 UNF X .625”
4CLD20 / 3VL9220-4TM41
-3X
-2X
-4X
-3X
3CLD20 / 3VL9220-4TM31
2CLD20 / 3VL9220-4TM21
2 X – 5/16”-18 UNC X .75”
-3X
3 X - 10-32 UNF X .625”
2 X - 10-32 UNF X .625”
-2X
-4X
-4X
-3X
-4X
-4X
4 X – 5/16”-18 UNC X .75”
4CLF350 /3VL9335-4TM41
I.L. No. 806854A02
Trip
[ Interrumpir
]
1
2
c l ic
4 No. of Crimps [ Cantidad de Compressiones ]
3
Ex:
2CLD20 / 3VL9220-4TM21
3CLD20 / 3VL9220-4TM31
4CLD20 / 3VL9220-4TM41 .75”
[ 19mm ]
1
2CLD20 / 3VL9220-4TM21
3CLD20 / 3VL9220-4TM31
4CLD20 / 3VL9220-4TM41
2
Ex:
2CLF350 / 3VL9335-4TM21
3CLF350 / 3VL9335-4TM31
4CLF350 / 3VL9335-4TM41
2CLF350 / 3VL9335-4TM21
3CLF350 / 3VL9335-4TM31
4CLF350 / 3VL9335-4TM41
1.13”
[ 29mm ]
6
1
2
4
Req. Wire Stranding
( Cable )
UL 486A - 486B
Compression Tool and Die chart for copper and aluminum conductors
[ Tabla de herramienta y molde para conductores de aluminio y cobre ]
Wire Size
[ Rango Cable ]
Tool No.
[ Número de
Herramienta ]
Die No.
[ Torquel
Número de ]
No. of Crimps
[Cantidad de
Compressiones ]
UT - 5
TWTY
2
UT - 15
58
1
Burndy
Y - 35
U245
1
T&B
TBM - 15
60
1
Hubbell –
Anderson
VC - 6
------
UT - 5
TX
6
UT - 15
76
2
249
1
658 / U29ART
2
Tool Mfg.
[ Suplidor de
Herramienta ]
Homac
2 / 0 AWG
_ CLD20
3VL9220-4TM_1
14 – 2 AWG
[ 2.5 – 25 mm2 ]
1 – 2 / 0 AWG
[ 35 - 50 mm2 ]
Homac
350 kcmil
_CLF350
3VL9335-4TM_1
6 – 2 AWG
[ 16 – 25 mm2 ]
1 – 4 / 0 AWG
[ 35 - 95 mm2 ]
250 – 350 kcmil
[ 120 - 150 mm2 ]
1
Burndy
Y - 35
Kearny
WH - 2
840
4
T&B
TBM15
76
2
Hubbell –
Anderson
VC - 6
2/3
--------
1
CU / AL
Class
B
CU
Class
C
7
19
7
19
19
37
37
61
7
19
19
37
37
61
806854A02
Hazardous Voltage.
Will cause death or serious injury.
5
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Turn off and lock out all power supplying this device before Desenergice totalmente antes de instalar o darle servicio.
working on this device.
Reemplace todas las barreras y cubiertas antes de
Replace all covers before power supplying this device is
energizar el interruptor.
turned on.
6
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté.
Ex: FG
DG -
5/32“
6 X 40 lb.in.
[ 4.5 Nm ]
DG
FG FG
1/4“
6 X 89 lb.in.
[ 10 Nm ]
See table
[ Ver tabla ]
.95” [ 24.13 ]
For Support in Europe refer to :
Bestell-Nr. / Order No.: 3ZX1012-0VL68-3AA4
Technical Support:
Subject to change without prior notice
Siemens Industry, Inc. , Norcross, GA 30092 U.S.A.
Internet: www.siemens.de/lowvoltage/technical-assistance
Toll Free: 1-800-241-4453
3/3
GWA 4NEB 179 6854-10 DS 03
Internet: www.usa.siemens.com/powerdistribution
© Siemens Industry Inc. 2010
806854A02