TRENT Electrically Heated Process Equipment

ELECTRIC FURNACES
TRENT
ELECTRIC OVENS
ELECTRIC KETTLES
SERVICE • INNOVATION • CRAFTSMANSHIP
S I N C E
1 9 2 7
ELECTRIC MELTERS
Electrically Heated
Process Equipment
ELECTRIC JACKETS
FINTUBE HEATERS
IMMERSION HEATERS
CONVEYOR OVENS
CONVEYOR FURNACES
F&F® HEATING ELEMENTS
STRIP HEATERS
TUBULAR HEATERS
®
TRENT, INC.
CARTRIDGE HEATERS
I N D U S T R I A L H E AT I N G S O L U T I O N S
F&F® HEATER RACKS
TRENT Industrial Heating
Equipment
ELECTRIC OVENS
TRENT electric ovens are available in three
basic designs: 1) Radiant Heat Transfer
which provides direct radiation from the
heat source for quick, inexpensive heat
within a limited area, 2) Gravity Convection
design uses an indirect heat source by placing
heating elements behind baffles to create
natural air circulation, and 3) Forced Air
Circulation Ovens which achieve temperature
uniformity by circulating air through a
centrifugal fan across resistance heaters to the
work chamber, alleviating work load distortion.
From small heaters to 50-foot customdesigned conveyor ovens, and from low
temperatures to 2500°F, TRENT has the
experience, capabilities, and knowledge
to customize your heating solution. Our
unique Folded & Formed® heating
elements deliver superior performance
for today’s heat-treat processes.
Our wide range of products meet heat
processing requirements of diverse
industries, including glass, nuclear fuels,
electronics, synthetic fibers, plastics,
aerospace, chemicals, ceramics, and
many more. In addition, we offer
engineering services to help you custom
design equipment to efficiently meet
your application’s requirements.
OVENS
STANDARD SIZE RANGES
Warming Ovens - Air Circulation
2’ W x 2’ H x 2’ D to 3’ W x 3’ H x 4’ D
Batch Ovens - Air Circulation
1’ W x 1’ H x 1’ D to 4’ W x 5’ H x 5’ D
Walk-In Ovens - Air Circulation
6’ W x 6’ H x 4’ D to 6’ W x 6’ H x 16’ D
Bell Ovens
8” dia. x 10” H to 15” dia. x 31.5” H
Bell Ovens - Radiant & Air Circ.
2’ W x 2’ H x 2’ D to 4’ W x 4’ H x 4’ D
Pit Ovens - Radiant
8” dia. x 10” H to 15” dia. x 31.5” H
Pit Ovens - Air Circulation
18” dia. x 20” H to 30” dia. x 36” H
Top Loading - Air Circulation
21” W x 19” H x 32” D to 39” W x 31” H x 62” D
TRENT furnaces have been carefully engineered, refined and tested to meet today’s
exacting industrial requirements. TRENT’s highly efficient Folded and Formed® (F&F®)
heating elements provide better temperature uniformity, closer control, and greater
flexibility, thus reducing costs and improving production rates.
STANDARD SIZE RANGES
Tubular Lab Furnaces
1.25” dia. x 12” L to 6” dia. x 48” L
Bench Top Box Furnaces
8” W x 5” H x 14” D
Bench Top Box Furnaces
To 37” W x 30” H x 41” D
Pot Furnaces
5” dia. x 6” H to 24” dia. x 30” H
Pit Furnaces
6” dia. x 8.5” H to 27” dia. x 32” H
Bell Furnaces
6” dia. x 8.5” H to 27” dia. x 32” H
Trough Furnaces
13” L x 13” W x 10” D to 88” L x 12” W x 18” D
Pit Vertical - Air Circulation
18” dia. x 18” H to 33” dia. x 48” H
Box Furnace - Radiant
12” W x 9” H x 18” D to 36” W x 24” H x 48” D
Muffle Furnaces - Air Circulation 13” W x 18” H x 24” D to 36” W x 36” H x 72” D
High Temperature - Radiant
To 24” W x 18” H x 36” D
ELECTRIC MELTERS
TRENT Lead and Babbit Melting Pots are made in a variety of sizes with 100 pound to 2000
pound capacity. All TRENT Melter Pots are fabricated from heavy gauge steel with fully
reinforced outer casings for long service.
The TRENT Aluminum and Zinc Melting Furnaces are specially designed for these “hard-tohandle” metals, and are available in stationary or tilting models.
TRENT Solder and Tinning Troughs answer the demand for precision controlled heavy duty
equipment. All Troughs are standard for bench and floor mounting.
Stationary Pots
Tilting Pots
Aluminum and Zinc Stationary and Tilting
VESSEL SIZE RANGES
MAX. TEMP.
7-3/4” dia. x 8-1/4” D to 18” dia. x 23” D
12” dia. x 6-1/2” D to 15” dia. x 24” D
1000°F
1000°F
18” dia. x 16” D to 18” dia. x 24” D
1400°F
12” L x 12” W x 2” D to 24” L x 24” W x 2” D
100” L x 3” W x 2-1/2” D to 132” L x 3” W x 2-1/2” D
600°F
800°F
TANK SIZE RANGES
Soldering Troughs
Reed Troughs
400°F
1400°F
850°F
1000°F
1200°F
1000°F
1200°F
1200°F
ELECTRIC FURNACES
FURNACES
MELTERS
MAX. TEMP.
MAX. TEMP.
2000°F
2500°F
2000°F
1700°F
2100°F
2100°F
1800°F
1400°F
2150°F
1750°F
2750°F
ELECTRIC PLUG HEATERS
TRENT Plug Heaters are compact, pre-packaged units designed for quick installation and
long life. TRENT’s unique Folded & Formed® heating elements ensure faster heating and
more efficient use of heat. Faster cooling prolongs the life of the heaters. For high or low
temperature drying and heating systems using forced air circulation, TRENT plug heaters
come in a variety of sizes to fit all your heating needs.
MODEL
MAX. TEMP.
VOLTS
KW
FFLP
FFHP
750°F
1350°F
240 - 480
240 - 480
7.5 - 60
7.5 - 60
FOLDED & FORMED® RACKS
TRENT standard F&F® heater racks with exclusive TRENT Folded and Formed® nickel-chrome
heating elements radiate optimum heat at low watt density. Within an aluminized or alloy steel
frame, supported by high-grade refractory porcelain, these ribbon elements provide heat more
readily and over a wider area than other elements. This means more heat, faster, with less energy
expended. They also allow faster cooling to prolong element life. These benefits, coupled with
ease of installation make TRENT F&F® heating racks as economical as they are efficient.
RACK MODEL
M2
AS
BS
CS
FS
MAX. TEMP. RATING
STANDARD SIZES
kW
750°F or 1350°F
750°F, 1350°F, 1850°F
750°F, 1350°F, 1850°F
750°F, 1350°F, 1850°F
750°F, 1350°F, 1850°F
13.75” H x 11.75” W
24.50” H x 22.50” W
16.75” H x 34.50” W
30.50” H x 34.50” W
13.75” H x 22.50” W
0.5 to 7.5
6.0 to 36.0
6.0 to 36.0
12.0 to 72.0
3.0 to 18.0
ELECTRIC KETTLES
TRENT KA Round Series kettles are designed to apply heat by radiation to the external surfaces
of a given vessel. The vessel can be removed from the kettle without removing the heaters or
disturbing the electrical connections. Steel side walls skirt down over part of the outer casing
protecting the heating elements from boil-over and possible damage.
TRENT’s KR or rectangular series is designed with radiant and convection heat. The vessel
proper may be removed from the kettle without disturbing the electrical connections.
Both series are available with heated valve and agitation systems.
KETTLES
KA Series - Round
KR Series - Rectangular
STANDARD SIZE RANGES
MAX.TEMP.
12” dia. x 10.75” H to 48” dia. x 48” H
14” L x 12” W x 8” D to 41” L x 36” W x 36” D
650°F
650°F
IMMERSION AND FINTUBE HEATERS
TRENT’s oil immersion (TRO, TSO and TSOL series) and Fintube (FO Series)
heaters are designed for oil preheating, oil baths, and heating other heat transfer
fluids. Oil immersion heaters use a tubular heater design. Fintube heaters have
an aluminum flange welded to a longitudinal finned tubing. The fins increase
the surface area, lowering the watts per square inch, and enabling a
higher kW to be used in a shorter length. The TRO series can be
supplied for single phase, or three phase open delta and comes with a
standard 4” outlet box. TSO, TSOL and FO series units are three phase,
and come complete with a 6” outlet box. Explosion proof heads can be
supplied for all models.
MODEL
TRO
TSO and TSOL
FO
MAX. TEMP.
KW
550°F
550°F
550°F
1.0 to 6.0
3.0 to 9.0
4.0 to 16.0
ELECTRIC JACKETS
Whether your application involves heating liquids or gasses, in such process vehicles as
kettles, retorts, reactors or piping, a TRENT electric jacket assures dependable heat at
temperatures not possible with steam or liquid heating methods.
Only TRENT high temperature jackets feature the exclusive Folded and Formed® nickelchrome ribbon heating element. This difference is what enables TRENT jackets to operate
at lower watt densities than conventional systems, reducing the incidence of heater
burnout while increasing efficiency, temperature control and uniformity.
CONVEYOR OVENS AND FURNACES
TRENT conveyor ovens and furnaces automate the batch process for maximum
production and minimum unit costs. These ovens and furnaces are custom-built to
meet exacting requirements for temperatures up to 2000°F.
Metal working and machinery, chemicals, plastics, glass, ceramics, electronics and
electrical machinery are only a few of the manufacturing and processing industries
where conveyor ovens and furnaces are used. TRENT conveyors are typically
constructed as one-piece units for complete package shipping wherever physically
practical. Modular designs are available to allow for future expansion, quick assembly and
on-site installation.
OTHER ELECTRIC HEATING ELEMENTS
TRENT also manufactures a wide range of strip, tubular, cartridge, and ceramic ring
heaters and hot plates designed to meet a variety of heating needs. Strip heaters
encased in seamless tubing are formed without grooves to achieve distortion-free
heating. The tubes are also pressed tight and sealed to insure moisture resistance.
Copper, steel or alloy tubular immersible heaters are available in straight lengths or in
bends formed to any required shape. Especially useful for immersion in oil, water or
corrosives, TRENT tubular heaters are also designed to provide convection heat in
lower temperature ovens. And, where spot heating is required, sheathed and
sheathless cartridge heaters provide utility heating directly to the object or material.
HEATER TYPE
STANDARD SIZE RANGES
Strip Heaters-750°F to 1300°F
8” to 72” lengths
Sheathed Cartridge
5/16” to 1-5/32” diameter
Sheathless Cartridge
5/16” to 1-5/32” diameter
WATTS
200 to 2600
100 to 1100
30 to 700
Tubular Heaters
Copper
Steel
Stainless Steel
12” to 200” length
12” to 200” length
12” to 200” length
675 to 7600
300 to 6300
450 to 7400
®
MANUFACTURING ELECTRICALLY HEATED
5000 Wilde Street, Philadelphia, PA 19127
(215) 482-5000 • FAX: (215) 482-9389
Call (800) 544-TRENT
www.trentheat.com • [email protected]
EQUIPMENT FOR DIVERSE INDUSTRIAL AND
COMMERCIAL APPLICATIONS SINCE
1927