820020 - TTC - Thermodynamics and Heat Transfer

Last update: 26/06/2011
820020 - TTC - Thermodynamics and Heat Transfer
Coordinating unit:
820 - EUETIB - Escola Universitària d'Enginyeria Tècnica Industrial de Barcelona
Teaching unit:
729 - MF - Department of Fluid Mechanics
Academic year:
2011
Degree:
DEGREE IN BIOMEDICAL ENGINEERING (Syllabus 2009). (Teaching unit Compulsory)
DEGREE IN ELECTRICAL ENGINEERING (Syllabus 2009). (Teaching unit Compulsory)
DEGREE IN CHEMICAL ENGINEERING (Syllabus 2009). (Teaching unit Compulsory)
DEGREE IN INDUSTRIAL ELECTRONICS AND AUTOMATIC CONTROL (Syllabus 2009). (Teaching unit
Compulsory)
DEGREE IN MECHANICAL ENGINEERING (Syllabus 2009). (Teaching unit Compulsory)
DEGREE IN ENERGY ENGINEERING (Syllabus 2009). (Teaching unit Compulsory)
ECTS credits:
6
Teaching languages:
Catalan, Spanish
Teaching staff
Coordinator:
ALFREDO DE JESUS GUARDO ZABALETA - RICARDO TORRES CAMARA
Others:
ALFREDO DE JESUS GUARDO ZABALETA - RICARDO TORRES CAMARA - CARLOS RUIZ MOYA JOAN GRAU BARCELÓ - RAUL NAVARRETE ROMERO - NURIA ROE VELLVE - RICARDO JAVIER
PRINCIPE RUBIO - PEDRO RUFES MARTINEZ - ROGER DALMAU ANDREU - GERARD CORTINA
MARIN - VICENTE BITRIAN VAREA
Degree competences to which the subject contributes
Specific:
3. Understand applied thermodynamics and heat transfer, their basic principles and their application to engineering
problems.
Generical:
1. TEAMWORK - Level 2. Contributing to the consolidation of a team by planning targets and working efficiently to
favor communication, task assignment and cohesion.
2. SELF-DIRECTED LEARNING - Level 2: Completing set tasks based on the guidelines set by lecturers. Devoting the
time needed to complete each task, including personal contributions and expanding on the recommended information
sources.
Learning objectives of the subject
1/3
Universitat Politècnica de Catalunya
Last update: 26/06/2011
820020 - TTC - Thermodynamics and Heat Transfer
Study load
Total learning time: 150h
Guided activities:
0h
0.00%
Laboratory classes:
7h 30m
5.00%
Practical classes:
0h
0.00%
Self study:
90h
60.00%
Theory classes:
52h 30m
35.00%
Content
(ENG) 1.- FONAMENTS DE TERMODINÀMICA
Learning time: 29h
Theory classes: 11h 30m
Laboratory classes: 2h 30m
Self study : 15h
(ENG) 2.- PRIMER PRINCIPI DE LA
TERMODINÀMICA
Learning time: 29h
(ENG) 3.- SEGON PRINCIPI DE LA
TERMODINÀMICA
Learning time: 26h 30m
(ENG) 4.- TRANSMISSIÓ DE CALOR POR
CONDUCCIÓ
Learning time: 23h 30m
(ENG) 5.- TRANSMISSIÓ DE CALOR POR
CONVECCIÓ
Learning time: 21h
Theory classes: 11h 30m
Laboratory classes: 2h 30m
Self study : 15h
Theory classes: 11h 30m
Self study : 15h
2/3
Theory classes: 6h
Laboratory classes: 2h 30m
Self study : 15h
Theory classes: 6h
Self study : 15h
Universitat Politècnica de Catalunya
Last update: 26/06/2011
820020 - TTC - Thermodynamics and Heat Transfer
(ENG) 6.- TRANSMISSIÓ DE CALOR POR
RADIACIÓ
Learning time: 21h
Theory classes: 6h
Self study : 15h
Bibliography
Basic:
Çengel, Yunus A.; Boles, Michael A. Termodinámica. 6ª ed. México, D.F: McGraw-Hill Interamericana, cop. 2009. ISBN
9789701072868.
Llorens, Martín; Miranda, Ángel Luis. Ingeniería térmica. Barcelona: Marcombo, cop. 2009. ISBN 9788426715319.
Çengel, Yunus A. Transferencia de calor y masa: un enfoque práctico. 3ª ed. México [etc.]: McGraw-Hill, cop. 2007. ISBN
9789701061732.
Complementary:
Moran, Michael J.; Shapiro, Howard N. Fundamentos de termodinámica técnica. 2ª ed. Barcelona [etc.]: Reverté, cop. 2004. ISBN
8429143130.
3/3
Universitat Politècnica de Catalunya