1
Soil Morphology
By
Prof. A. Balasubramanian
Centre for Advanced Studies in Earth Science,
University of Mysore,Mysore
Abstract
Morphology describes and measures a wide range of soil properties, and includes as assessment of
soil particles and aggregates that provide estimates of soil void characteristics and hydraulic
properties. There are five major soil morphological features like texture, initial moisture, pedality,
macroporosity, and root density. Soil morphology deals with the form, structure, and organization of
the soil material. This report provided the importance of soil morphology, its inherent properties,
functions and distributions.
1. Introduction:
Soil morphology is the field observable attributes of the soil within the various soil horizons and the
description of the kind and arrangement of the horizons.
Soil morphology deals with the form and arrangement of soil features.
Soil morphology is ordinarily first observed, described, and studied in the field, but investigation can
be continued in the laboratory with optical and electron microscopes.
Field observations with the unaided eye or with a hand lens are considered macromorphology,
whereas observations utilizing a microscope are considered micromorphology.
2. Soil Macromorphology:
Macromorphology is best evaluated from the in situ examination of the soil profile.
A recently dug pit large enough for observation of a pedon is desirable.
Old exposures such as road cuts and ditches are acceptable only for preliminary examination because
morphological features often become altered after prolonged exposure.
he exposed profile should be probed by hand, with the aid of a knife or small pick to remove any
alterations resulting from digging equipment and to expose the natural condition of the soil. Following
this cleanup is a good time to photograph the profile, including a tape measure or some other suitable
reference for scale.
3. Micromorphology:
Micromorphology is a term used in biology, mineralogy and soil science.
The fine-level structures or morphology of an organism, mineral, or soil component visible through
microscopy. Micromorphology is the branch of soil science that is concerned with the description,
interpretation and, to an increasing extent, the measurement of components, features and fabrics in
soils at a microscopic level".
4. Fabric, Structure and Assemblage :
Fabric is the mutual arrangement and relationship between particles within the soil as a whole and
within the various features, while structure is the type and degree of aggregation.
The totality of all features in a specimen is called an ensemble or assemblage.
1
2
The main fabric relationships seen in thin sections are in the fine earth, including both mineral and
organic materials. These may be observed in thin sections but in a number of cases SEM is required.
5. Fine material :
This refers to the material with a diameter of less than about 20µm and which is beyond the resolving
power of the optical microscope.
It may be arranged as granules, masses, and links between grains or forms a complete matrix.
6. Recognition of individual features :
One of the most difficult tasks in micromorphology is the recognition of individual features.
Clay particles are themselves individuals; they cannot be recognized with the optical microscope but
can only be identified with TEM or SEM techniques.
Most thick clay coatings are easily recognized, but thin clay coatings are extremely difficult to
identify.
The frequency of clay coatings in a given soil can vary widely when estimated by different operators.
7. Recognition of patterns :
Probably the most important aspect of micromorphology is the recognition of patterns, not only the
pattern of single individuals but also the relationships between the individuals themselves.
The types of pattern range from the relatively simple distribution of individual quartz grains to the
often complex distribution pattern of clay coatings.
Probably the most difficult patterns to recognize are those of the anisotropism of matrices.
It is often difficult to describe individuals and patterns.
In many cases a true representation can only be achieved with good photographs and diagrams.
8. Quantification of features :
It has been shown that over 20 cores with two thin sections from each core are required to
characterize quantitatively coatings, matrices, pores and concretions in horizons with translocated
clay. However, considerable success is being achieved by the application of many image analysis
techniques to thin sections and polished blocks.
9. Interpretation of features and patterns:
This is based on a combination of experience, intuition and guess-work. Most workers agree that the
majority of clay coatings have been formed by the translocation of clay particles and their deposition
on surfaces.
They also agree that clusters of calcite and gypsum crystals have been formed by the translocation of
calcium bicarbonate and calcium sulfate and crystals growth.
However the interpretation of some concretionary material in very old tropical soils is extremely
difficult.
10. Properties of features and minerals :
The main properties are:
color, prominence, size, shape frequency, roundness, sphericity, surface characteristics, boundaries,
distribution pattern, relationships between features and orientation
11. Field morphology :
Field morphology is the study of soil morphological features in the field by thorough observation,
description and interpretation. Observations may be refined with the aid of a hand lens. Simple tests
are also used in the field to record salient chemical properties (e.g., pH, presence of carbonates).
2
3
In addition, field observations and measurements may be refined through a range of laboratory
analytical procedures that include more sophisticated evaluation of chemical, biological and physical
attributes.
However, the quality of field description and sampling ultimately defines the utility of any subsequent
laboratory analyses.
A keen eye that can discern specific features and their relationship to adjoining features coupled with
well-calibrated fingers that can distinguish among relative differences in physical properties of soil
material are essential and can only be acquired and maintained through practice.
Field morphology starts with an in situ examination of a soil profile. Field descriptions are organized
by subdividing a vertical exposure of the soil (soil profile) into reasonably distinct layers or horizons
that differ appreciably from the horizons immediately above and below in one or more of the soil
features listed below.
Delineation of Soil Horizons
The delineation of horizons is necessarily a somewhat subjective processes because changes in soil
attributes are often gradational rather than abrupt.
Thus, obvious boundaries between horizons are not always apparent and their assignment may require
integrated assessment of changes in several attributes before a sensible and defensible delineation can
be made.
Knowledge of similar soils and a well-defined rationale for the purpose of the description helps
considerably in development of systematic criteria for defining and delineating horizons.
Standard profile descriptions
The following information is collected for assembling standard profile descriptions:
Depth intervals of horizons or layers (measured from the top of the mineral horizon)
Horizon boundary characteristics
Color
Texture
Structure, pores
Consistence
Distribution of Roots
pH, effervescence
Special features such as coatings, nodules, and concretions.
12. Soil Site Characteristics
Soil site characteristics are as important as the profile description to a comprehensive soil description.
Whereas, the profile description details the internal organization of the soil, a site description details
the landscape of the soil.
Soil distribution is substantially determined by landscape features.
Some of the site characteristics important to a soil description are:
1. Relief
2. Microrelief
3. Elevation
4. Slope (gradient, length, aspect, surface, configuration)
5. Vegetation
6. Parent material
7. Erosion
3
4
8. Depth
It is beyond the scope of this manual to enumerate all the terms used to describe each of the site
characteristics.
13. Relief & Microrelief
In a broad sense, relief refers to the differences in elevations of landscape features. It is expressed in
units appropriate to the scale of the landscape.
Microrelief refers to the differences in elevation of landscape features over distances of centimeters to
meters. Microrelief would take into account small knolls and swales, coppice dunes, and gilgai.
14. Elevation
The soil elevation is the vertical distance of the soil above mean sea level.
This can be determined by locating the soil site on a topographic map.
15. Soil slope
Soil slope has a number of distinct properties: gradient, length, aspect, and surface configuration.
Slope influences many aspects of soil development, such as water movement, runoff, erosion, and
other factors.
Slope gradient is the slant or inclination of the soil surface from the horizontal. Slope gradient is
usually determined with a hand level or clinometer.
For example, if the difference in elevation is 1 meter over a horizontal distance of 100 meters, the
slope is 1 percent. Some of the terms used to describe a slope gradient are level, gently sloping, and
steeply sloping. Slope length is a term describing how 'long' or 'short' a slope extends over the local
physiography.
Slope aspect is the compass direction in which the soil surface faces.
It is expressed as an angle between 0 and 360 degrees measured clockwise from true north. Slope
aspect is important in terms of amount of exposure to the sun.
South-facing slopes receive more solar radiation in the northern hemisphere than do north-facing
slopes.
Surface configuration describes the shape of the local landscape. An alluvial fan and the shoulder of a
ridge both have a convex slope, in which the gradient increases downslope. Foot slopes have a
concave slope in which the gradient decreases downslope.
16. Vegetation
In a site evaluation, an estimate should be made of the kinds and amounts of natural vegetation
present.
The vegetation present is closely related to the genesis of the soil. A note should be made of
vegetation even if the area has been disturbed by cropping, grazing, timbering, strip mining, or other
practices. Notes of this kind can help to clarify or even discover plant-soil relationships.
Recognition of plant communities and knowledge of soil-plant relationships can aid in the
identification of soil boundaries.
17. Parent Material
Parent material is the material from which the soil has formed. These deposits range in character from
organic peat to unconsolidated rock. Parent material can either form in place or be transported from
elsewhere. Residual, or parent materials formed in place, include weathered igneous, sedimentary,
and metamorphic rocks. Transported parent materials are moved by wind, water, ice, or gravity.
Wind transported materials include ash, loess, and sand.
4
5
Water transported materials include alluvial, lacustrine, marine, and beach deposits. Ice transported
materials, either directly by ice or by melt waters from the ice, all come under the heading glacial
drift. There is a detailed nomenclature for this large group of deposits, but their enumeration is not
warranted here. Gravity transported materials come under the heading of colluvium.
19. Erosion
The degree to which accelerated erosion, or that induced by man, has affected soil formation and
suitability for management is evaluated in a site description.
If possible, the properties of both the eroded and uneroded phase of a particular soil should be
evaluated.
The effect of erosion can then be determined by a comparison. Soils are divided into erosion classes
based on the amount of material lost from the soil surface.
20. Soil Depth
Soil depth is determined by the total thickness of soil horizons that are significant to soil use and
management.
It is normally the depth to which plant roots develop. Soil depth is described as either deep, moderate,
shallow, or very shallow to a restrictive layer.
Restrictive layers include cemented horizons, claypans, bedrock, and sometimes abrupt textural
changes.
21. Conclusion:
Soil morphology, characterized by soil structural analysis in topo sequences, facilitates the
understanding of the topographic influence on the chemical, physical, hydrological and
micromorphological attributes of soils. Micromorphology combined with other soil analyses helps in
the integration and synthesis of soil processes, covering several hierarchical levels , from the
landscape to the soil microstructure .
5