208 Aluminum Triple Fold EOE Our Code E-035C Attached Documents: MFG Specification 2PD39539 Dated August 8, 2024 Drawing 2PD39539 Dated November 29, 2005 Chuck Drawing Contact: Paul McClure Phone: +1-205-981-1202 Fax: +1-205-981-4502 Email: [email protected] Web: www.gilpinezo.com +1-205-981-1202 Phone ∙ +1-205-981-4502 fax 11 Olmsted Street, Birmingham, AL, 35242 USA [email protected] ∙ www.gilpinezo.com Inside Coating: 2PD69179 W.49.3, Modified2PD39539 Polyester Can Drawing: Customer EndWhite Drawing: Metal: Coating: 0.0084”,Clear Alloy:Epoxy 5042, Modified Temper: H2E72 Outside O.95.4, Date: 8/8/24 Supersedes: N/A Inside Coating: W.49.3, White Modified Polyester Outside Coating: SPECIFICATIONS O.95.4, Clear Epoxy Modified BODY MATERIAL Size: 208 x 208 Product(s): Vienna Sausage CUSTOMER END MATERIAL SPECIFICATIONS Type: Aluminum Draw/Redraw Size: 208 Metal: 0.0084”, H2E72 Can COC: END MATERIAL 24.24.026.105 Customer EndAlloy: COC:5042, Temper: 24.00.060.223 CUSTOMER SPECIFICATIONS Type: Aluminum FPPO Inside Coating: W.49.3, White Modified Polyester Size: 208 Outside Coating: 2PD69179 O.95.4, Epoxy Metal: 0.0088”, Alloy: 5042, Modified Temper: H2E72 Can Drawing: Customer EndClear Drawing: 2PD39539 Type: Aluminum FPPO Inside Coating: X.V.52.5, Gold Organasol Metal: 0.0088”, Alloy: 5042, Temper: Outside Coating: O.95.4, Clear Epoxy Modified H2E72 Inside Coating: X.V.52.5, Gold Organasol CUSTOMER END MATERIAL SPECIFICATIONS Sealing Compound: M0042, 9385HC57 BODY MATERIAL Outside Coating: SPECIFICATIONS O.95.4, Clear Epoxy Modified Size: 208 Type: Compound: Aluminum Draw/Redraw Sealing M0042, 9385HC57 Type: Aluminum FPPO Metal: 0.0084”, Alloy: 5042, Temper: H2E72 Metal: 0.0088”, Alloy: Temper: H2E72 BODY InsideDIMENSIONS Coating: W.49.3, White 5042, Modified Polyester Specification for 208 Aluminum Triple Fold EOE Inside Coating: X.V.52.5, Gold Organasol Bead Style: 7 Bead Outside Coating: O.95.4, Clear Epoxy Modified BODY DIMENSIONS Outside Coating: Can Height: O.95.4, Clear Epoxy Modified Factory Finished 2.507+/-0.018” Bead Style: 7M0042, Bead 9385HC57 Sealing Compound: Bottom 0.079 +/- .005” Factory Countersink Finished Can Height: 2.507+/-0.018” CUSTOMER END MATERIAL SPECIFICATIONS Flange Width: 0.082 Bottom Countersink 0.079 +/-0.006” +/- .005” Size:Fit Width: 208 +.005/-.003” End Diameter: 2.399 Flange 0.082 +/-0.006” BODY DIMENSIONS Type: Aluminum FPPO End Fit Diameter: 2.399 +.005/-.003” Bead Style: 7 Bead Metal: 0.0088”, Alloy: 5042, Temper: H2E72 Factory Finished Can Height: 2.507+/-0.018” Inside Coating: X.V.52.5, Gold Organasol CUSTOMER END DIMENSIONS Bottom Countersink 0.079 +/- .005” Outside Coating: O.95.4, Clear Epoxy Modified CUSTOMER END DIMENSIONS Curl Diameter: 2.736+/-0.004” Flange Width: 0.082 +/-0.006” Sealing Compound: M0042, @ 9385HC57 Curl Diameter: 2.736+/-0.004” Chuck Fit Diameter (GO): 2.3717” 0.047 End Fit Diameter: 2.399 +.005/-.003” Chuck Fit Diameter (NO (GO):GO): 2.3717” @ 0.047 2.3767” Chuck Fit Diameter 2.3767” @ 0.047 Countersink Depth: (NO GO): 0.123+/-0.003” BODY DIMENSIONS Countersink Depth: 0.123+/-0.003” Curl Opening: 0.131” min CUSTOMER END DIMENSIONS Bead Style: 7 Beadmin Curl Opening: 0.131” Ends per 2 Inches: 26-28 Curl Diameter: 2.736+/-0.004” Factory Finished Height: 2.507+/-0.018” Ends per 2Diameter Inches:Can 26-28 Chuck Fit (GO): 2.3717” @ 0.047 BottomFit Countersink 0.079 +/[email protected]” Chuck Diameter (NO GO): 2.3767” 0.047 PHYSICAL PERFORMANCE Flange Width: 0.082 +/-0.006” PHYSICAL PERFORMANCE Countersink Depth: 0.123+/-0.003” Axial Load (minimum): 250 lbs. End Opening: Fit Diameter: 2.399 +.005/-.003” Axial Load (minimum): 250 lbs. Curl 0.131” min Panel (minimum): 17 psi. Panel (minimum): 17 psi. Ends per 2 Inches: 26-28 Buckle, factory end or integral end (minimum): 15 psi. Buckle, factory end or integral end (minimum): 15 psi. CUSTOMER END DIMENSIONS PHYSICAL PERFORMANCE Curl Diameter: 2.736+/-0.004” Axial Load (minimum): 250 lbs. PACKAGING Chuck Fit Diameter (GO): 2.3717” @ 0.047 PACKAGING Panel (minimum): 17 psi. Cans: 399 cans per layer, 37 layers per per pallet Chuck Fit Diameter (NO GO): 2.3767” @ 0.047 Cans: 399 cans per layer, 37 end layers per pallet, pallet, 14,763 14,763 cans cans15 per pallet Buckle, factory end or integral (minimum): psi. Ends: 460 ends ends Countersink Ends: 460 Depth: ends per per sleeve, sleeve, 395 395 sleeves sleeves per per pallet, pallet, 181,700 181,7000.123+/-0.003” ends per per pallet pallet Curl Opening: 0.131” min Ends per 2 Inches: 26-28 PACKAGING Cans: 399 cans per layer, 37 layers per pallet, 14,763 cans per pallet PHYSICAL PERFORMANCE Ends: 460 ends per sleeve, 395 sleeves per pallet, 181,700 ends per pallet Axial Load (minimum): 250 lbs. Panel (minimum): 17 psi. Buckle, factory end or integral end (minimum): 15 psi. PACKAGING Cans: 399 cans per layer, 37 layers per pallet, 14,763 cans per pallet Ends: 460 ends per sleeve, 395 sleeves per pallet, 181,700 ends per pallet +1-205-981-1202 Phone ∙ +1-205-981-4502 fax 11 Olmsted Street, Birmingham, AL, 35242 USA [email protected] ∙ www.gilpinezo.com Drawing for 208 Aluminum Triple Fold EOE +1-205-981-1202 Phone ∙ +1-205-981-4502 fax 11 Olmsted Street, Birmingham, AL, 35242 USA [email protected] ∙ www.gilpinezo.com Chuck Drawing for 208 Aluminum Triple Fold EOE 4° B0° 10' 16 V .0005 A SHARP CORNER 16 .130 .129 (28° 32') R.070 B.001 P.094 P2.08 .047 .092 B.001 PIN 16 16 CR.006 B.001 16 CR.030 B.001 P2.298 2.296 COAT BOLD AREA PER CHART (P2.3753) @ .047 HT. (P2.3869) ACROSS CORNERS 6DS50748-D0 (1.7545) 1.625 B.001 1.13 .75 P2.5638 2.5633 OVER PINS BREAK ALL SHARP EDGES WITH .02 X 45° CHFRS. UNLESS OTHERWISE NOTED A NOTE: SEE SHEET 2 FOR MATERIAL, HEAT TREAT & COATING. PART MUST BE COMPLETELY DEMAGNETIZED. 125 ALL DIMENSIONS ARE AFTER COATING. 12 UNF (L.H.) HRU CLASS 2B MATERIAL SEE PAGE 2 SEE PAGE 2 MACHINE FINISH UNLESS OTHERWISE NOTED SILGAN CONTAINERS MFG. CORP. EQUIPMENT ENGINEERING, OCONOMOWOC WI. V .001 A E (ON P.D.) DURING HEAT TREAT / FINISH THIS DRAWING IS THE PROPERTY OF SILGAN CONTAINERS MFG. CORP. AND MUST BE ACCOUNTED FOR. INFORMATION HEREON IS CONFIDENTIAL AND MUST NOT BE USED, REPRODUCED, OR REVEALED TO UNAUTHORIZED PERSONS, OR SENT OUTSIDE THE COMPANY, WITHOUT PROPER AUTHORIZATION SEAMING CHUCK, 208 D. (2.3753 @ .047) SANITARY END +1-205-981-1202 Phone ∙ +1-205-981-4502 fax MACHINING TOLERANCES UNLESS OTHERWISE NOTED 11 Olmsted Street, Birmingham, AL, 35242ANGELUS USA H & L SERIES SEAMERS [email protected] ∙ www.gilpinezo.com P-24.00.05; P-24.00.08 SHEET 1 OF 2 TWO PLACE (.XX) ±.01 THREE PLACE (.XXX) ±.002 FOUR PLACE (.XXXX) ±.0002 ANGLES ±1/2° CAST RADII UP TO R.25 ±.015, OVER R.25 ±.03 THREADS 1" AND LESS ARE 3A & 3B, LARGER ARE 2A & 2B PART NO. - 1/14/09 HAJ RELEASE 14-10822 6DS50748-D0 REF. LAYOUT PATTERN NO. ASSEMBLY NO. SEE NOTE SIMILAR TO MATERIAL LIST DATE DRAWN SCALE CHECKED APPROVED DWG. 12/18/2008 H, Jung 2:1 & AS NOTED