Subido por jcalsina11

comandos configurar interfaces

Anuncio
guate-r1>
guate-r1>
guate-r1>enable
guate-r1#configure terminal
guate-r1(config)#
guate-r1(config)#no
ip domain-lookup
hostname guate-r1
guate-r1(config)#do write
guate-r1(config)#
guate-r1(config)#interface
gigabit 0/2
guate-r1(config-if)#ip
address 192.168.10 255.255.255.0
guate-r1(config-if)#no shutdown
(encendete) no apagado
do write
guate-r1(config-if)#
guate-r1(config-if)#do show ip interface. brief
guate-r1(config-if)#do show running-config
DR: 192.168.10.0
Rango 192.168.10.1. hasta 192.168.10.254
DB: 192.168.10.255
Configurar consola
guate-r1(config)#line console 0
guate-r1(config-line)#password cisco
guate-r1(config-line)#login
guate-r1(config-line)#do write
cnnfigurar contraseña privilegiado
guate-r1(config)#enable secret coban
guate-r1(config)#do write
Building configuration...
Descargar