Model 151XST Hazardous Location Strobe Light Model 151XST hazardous location strobe light provides 80 high-intensity flashes per minute. This hazardous location warning light has an aluminum base, coated for corrosion resistance, that can be ordered for mounting on a 3/4-inch NPT pipe or a surface. The dome guard (included) fits over the glass lens to protect it against accidental collision with moving equipment, such as forklifts. Federal Signal’s rugged 151XST strobe light is specifically designed for hazardous locations or corrosive environments where a very bright visual signal is required. This warning light can be used for plant evacuation or other communication needs. F E A T U R E S • Available in 12-24VDC, 120VAC and 230-240VAC • Conformal coated PCBA • Five lens colors: Amber, Blue, Clear, Green and Red • Type 4X, IP66 enclosure • 10,000-hour high-intensity strobe • IP69K compliant • Available in 3/4-inch NPT pipe mount or surface mount • Marine rated • Dome guard included • UL and cUL Listed for Class I, Division 2, Groups A, B, C and D; Class II, Division 1, Groups E, F, and G; Class III • Indoor/outdoor use MODEL V O LTA G E O P E R AT I N G CURRENT FLASH RATE/ MINUTE LIGHT OUTPUT PEAK1 ECP2 151XST-*012-024** 12-24VDC 1.3-0.60 amps 80 520,000 cd 165 cd 151XST-*120** 120VAC 50/60Hz 0.35 amps 80 520,000 cd 165 cd 151XST-*240** 230-240VAC 50/60Hz 0.18 amps 80 520,000 cd 165 cd * Include (S) for Surface Mount Option (Example part number: 151XST-S120R for surface mount option, 151XST-120R for pipe mount) ** Indicates color: (A) Amber, (B) Blue, (C) Clear, (G) Green or (R) Red 1 Peak candela is the maximum light intensity generated by a flashing light during its light pulse 2 ECP (Effective Candela) is the intensity that would appear to an observer if the light were burning steadily HAZARDOUS LOCATION RATING: 151XST T- C O D E AT M A X IM U M A M B IENT TEM P ER ATU R E, °C 120 Hazardous Location 40ºC 66ºC Class I, Division 2, Groups A, B, C, D T2 T1 Class II, Division 1, Groups E, F, G T5 T5 Class III T5 T5 Surface Mount Pipe Mount Dome Guard (Included) 5.5"/139.7 mm Glass Lens Glass Lens Strobe Tube Strobe Tube 9.25"/ 235.0 mm Gasket Aluminum Base Gasket 2x 3/4" NPT Entry 6.52" / 165.6 mm S I G N A L S Dome Guard (Included) 8.18" / 207.8 mm V I S U A L Hazardous Location Strobe Light (151XST) Aluminum Base Power Wires 5.58" / 141.7 mm Power Wires 3/4" NPT Pipe Mount 3.00" / 76.2 mm 0.26" / 6.6 mm S P E C I F I 0.51" / 13.0 mm C A T I O N S Lamp Life: Light Source: R E P L A C E M E N T Description 10,000 Hours Strobe tube Operating Temperature: -55°C to 66°C 3.8 lbs 4.5 lbs 1.7 kg 2.0 kg Pipe Mount Height: Diameter: 9.25" 5.5" 235.0 mm 139.7 mm Surface Mount Height: Diameter PCB Assembly, 12-24VDC PCB Assembly, 120VAC PCB Assembly, 240VAC 8.18" 6.52" 207.8 mm 165.6 mm Strobe Tube O W T O 151XST – S TYPE 151XST O R 12-24 MOUNTING Blank - Pipe S - Surface D E R 2645 Federal Signal Dr., University Park, IL 60484 COLOR A Amber B Blue C Clear G Green R Red Tel: +1 708.534.4756 K149122B K8449090C Includes dome gasket O P T I O N A L A VOLTAGE 012-024 (Pipe) (12-24VDC) 12-24 (Surface) (12-24VDC) 120 (120VAC) 240 (230-240VAC) K2001173C K2001071B K2001071B-01 Dome Guard 1 H Part Number Series C Dome and Ring Assembly Lens & Ring Assembly, Amber1 K8449078C-01 Lens & Ring Assembly, Blue1 K8449078C-06 Lens & Ring Assembly, Clear1 K8449078C-04 Lens & Ring Assembly, Green1 K8449078C-07 Lens & Ring Assembly, Red1 K8449078C -67°F to 150°F Net Weight: Shipping Weight: P A R T S A C C E S S O R I E S Description Part Number Hazardous Location Mounting Bracket LHWB Mounting Brackets shown on pages 138-139 Email: [email protected] www.fedsig.com | 121