Item No. 21807-4 NACE International BOOK OF STANDARDS Volume 1 This NACE International Book of Standards includes all NACE International standards that have been produced as of October 1, 2005. To keep your NACE International Book of Standards updated, consider subscribing to the NACE Standards Updating Service. Subscribers also save more than 50% off the price of individual standards. To subscribe, contact the NACE International FirstService Department, 1440 South Creek Drive, Houston, Texas 77084-4906, phone +1 (281)228-6223, fax +1 (281)228-6329. Published by NACE International 1440 South Creek Drive Houston, TX 77084-4906 ISBN 1-877914-50-9 © 2005, NACE International --```,,`````,,``,``,`,,`,,,``-`-`,,`,,`,`,,`--- October 2005 Copyright NACE International Provided by IHS under license with NACE No reproduction or networking permitted without license from IHS Licensee=ConPhil Loc 1-Houston TX/5919206101, User=chen, xiangrong Not for Resale, 11/05/2005 22:53:32 MST NACE INTERNATIONAL BOOK OF STANDARDS Volume 1 NACE International issues three classes of standards: recommended practices (RP), test methods (TM), and material requirements (MR). The alphanumeric designations for NACE International standards indicate the class of standard, the number of the standard in its class for the year of publication, and the year of publication. The number immediately following the hyphen reflects the year of the most recent revision or reaffirmation of that particular standard. For example, RP0170-2004 is the designation for the 2004 version of the first recommended practice issued in 1970. RP0472-2000 indicates the 2000 version of the fourth recommended practice issued in 1972. A reference appearing on the cover page of the published standard will explain that this standard was reaffirmed in 2000 and the cover page will continue to detail the full approval history of the document. Existing standards will be modified accordingly as they are revised or reaffirmed. NACE International standards are in two volumes: Recommended Practices are in Volume 1; Test Methods and Material Requirements are in Volume 2. A description of the general nature of each type of NACE International standard is provided at the end of this table of contents. A listing of all NACE International standard recommended practices follows. EXAMPLE: HOW TO FIND A STANDARD IN THIS BOOK Recommended Practices If you were looking for RP0475-98, (1) Go to the RP (Recommended Practices) section. --```,,`````,,``,``,`,,`,,,``-`-`,,`,,`,`,,`--- (2) Scan the headings of the pages and look for RPXX75-XX⎯these are standards that were originally published in 1975. All of the 1975 RPs are next to each other. (3) When you locate the RPs published in 1975, look for RP0475-98, which will be between RP0375 and RP0575. *NOTE: NACE/SSPC standards are found at the beginning of the RP section. A SUBJECT INDEX is located in the back of this Book of Standards. October 2005 Copyright NACE International Provided by IHS under license with NACE No reproduction or networking permitted without license from IHS Licensee=ConPhil Loc 1-Houston TX/5919206101, User=chen, xiangrong Not for Resale, 11/05/2005 22:53:32 MST TABLE OF CONTENTS RECOMMENDED PRACTICES NACE No. 1/SSPC-SP 5 White Metal Blast Cleaning (RP0494-2000)—Item No. 21065 NACE No. 2/SSPC-SP 10 Near-White Metal Blast Cleaning (RP0594-2000)—Item No. 21066 NACE No. 3/SSPC-SP 6 Commercial Blast Cleaning (RP0694-2000)—Item No. 21067 NACE No. 4/SSPC-SP 7 Brush-Off Blast Cleaning (RP0794-2000)—Item No. 21068 NACE No. 5/SSPC-SP 12 Surface Preparation and Cleaning of Metals by Waterjetting Prior to Recoating (RP0595-2002)—Item No. 21076 NACE No. 6/SSPC-SP 13 Surface Preparation of Concrete (RP0397-2003)—Item No. 21082 NACE No. 8/SSPC-SP 14 Industrial Blast Cleaning (RP0299-99)—Item No. 21088 NACE No. 10/SSPC-PA 6 Fiberglass-Reinforced Plastic (FRP) Linings Applied to Bottoms of Carbon Steel Aboveground Storage Tanks (RP0202-2002)—Item No. 21093 NACE No. 11/SSPC-PA 8 Thin-Film Organic Linings Applied in New Carbon Steel Process Vessels (RP010303)—Item No. 21099 NACE No. 12/AWS C2.23M/ SSPC-CS 23.00 Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel—Item No. 21100 RP0169-2002 Control of External Corrosion on Underground or Submerged Metallic Piping Systems—Item No. 21001 RP0170-2004 Protection of Austenitic Stainless Steels and Other Austenitic Alloys from Polythionic Acid Stress Corrosion Cracking During Shutdown of Refinery Equipment—Item No. 21002 RP0472-2000 Methods and Controls to Prevent In-Service Environmental Cracking of Carbon Steel Weldments in Corrosive Petroleum Refining Environments—Item No. 21006 RP0572-2001 Design, Installation, Operation, and Maintenance of Impressed Current Deep Groundbeds—Item No. 21007 RP0273-2001 Handling and Proper Usage of Inhibited Oilfield Acids—Item No. 21009 RP0274-2004 High-Voltage Electrical Inspection of Pipeline Coatings—Item No. 21010 RP0375-99 Wax Coating Systems for Underground Piping Systems—Item No. 21013 RP0475-98 Selection of Metallic Materials to Be Used in All Phases of Water Handling for Injection into OilBearing Formations—Item No. 21014 RP0575-2001 Internal Cathodic Protection Systems in Oil-Treating Vessels—Item No. 21015 RP0775-2005 Preparation, Installation, Analysis, and Interpretation of Corrosion Coupons in Oilfield Operations— Item No. 21017 RP0176-2003 Corrosion Control of Steel Fixed Offshore Platforms Associated with Petroleum Production—Item No. 21018 --```,,`````,,``,``,`,,`,,,``-`-`,,`,,`,`,,`--- October 2005 Copyright NACE International Provided by IHS under license with NACE No reproduction or networking permitted without license from IHS Licensee=ConPhil Loc 1-Houston TX/5919206101, User=chen, xiangrong Not for Resale, 11/05/2005 22:53:32 MST RP0177-2000 Mitigation of Alternating Current and Lightning Effects on Metallic Structures and Corrosion Control Systems—Item No. 21021 RP0180-2001 Cathodic Protection of Pulp and Paper Mill Effluent Clarifiers—Item No. 21024 RP0281-2004 Method for Conducting Coating (Paint) Panel Evaluation Testing in Atmospheric Exposures—Item No. 21026 RP0185-96 Extruded Polyolefin Resin Coating Systems with Soft Adhesives for Underground or Submerged Pipe—Item No. 21029 RP0285-2002 Corrosion Control of Underground Storage Tank Systems by Cathodic Protection—Item No. 21030 RP0186-2001 Application of Cathodic Protection for External Surfaces of Steel Well Casings—Item No. 21031 RP0286-2002 Electrical Isolation of Cathodically Protected Pipelines—Item No. 21032 RP0386-2003 Application of a Coating System to Interior Surfaces of Covered Steel Hopper Rail Cars in Plastic, Food, and Chemical Service—Item No. 21033 RP0187-2005 Design Considerations for Corrosion Control of Reinforcing Steel in Concrete—Item No. 21034 RP0287-2002 Field Measurement of Surface Profile of Abrasive Blast-Cleaned Steel Surfaces Using a Replica Tape—Item No. 21035 RP0387-99 Metallurgical and Inspection Requirements for Cast Galvanic Anodes for Offshore Applications— Item No. 21036 RP0487-2000 Considerations in the Selection and Evaluation of Rust Preventatives and Vapor Corrosion Inhibitors for Interim (Temporary) Corrosion Protection—Item No. 21037 RP0188-99 Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates—Item No. 21038 RP0288-2004 Inspection of Linings on Steel and Concrete—21039 RP0388-2001 Impressed Current Cathodic Protection of Internal Submerged Surfaces of Carbon Steel Water Storage Tanks—Item No. 21040 RP0189-2002 On-Line Monitoring of Cooling Waters—Item No. 21041 RP0290-2000 Impressed Current Cathodic Protection of Reinforcing Steel in Atmospherically Exposed Concrete Structures—Item No. 21043 RP0390-98 Maintenance and Rehabilitation Considerations for Corrosion Control of Atmospherically Exposed Steel-Reinforced Concrete Structures—Item No. 21044 RP0490-2001 Holiday Detection of Fusion-Bonded Epoxy External Pipeline Coatings of 250 to 760 µm (10 to 30 mils) —Item No. 21045 RP0590-96 Recommended Practice for Prevention, Detection, and Correction of Deaerator Cracking—Item No. 21046 RP0690-2004 Standard Format for Collection and Compilation of Data for Computerized Material Corrosion Resistance Database Input—Item No. 21047 * A plastic visual comparator for on-site use by field personnel may also be purchased with this standard. October 2005 Copyright NACE International Provided by IHS under license with NACE No reproduction or networking permitted without license from IHS Licensee=ConPhil Loc 1-Houston TX/5919206101, User=chen, xiangrong Not for Resale, 11/05/2005 22:53:32 MST --```,,`````,,``,``,`,,`,,,``-`-`,,`,,`,`,,`--- RP0178-2003* Fabrication Details, Surface Finish Requirements, and Proper Design Considerations for Tanks and Vessels to Be Lined for Immersion Service—Item No. 21022 RP0191-2002 The Application of Internal Plastic Coatings for Oilfield Tubular Goods and Accessories—Item No. 21048 RP0291-2005 Care, Handling, and Installation of Internally Plastic-Coated Oilfield Tubular Goods and Accessories —Item No. 21049 RP0391-2001 Materials for the Handling and Storage of Commercial Concentrated (90 to 100%) Sulfuric Acid at Ambient Temperatures—Item No. 21050 RP0491-2003 Worksheet for the Selection of Oilfield Nonmetallic Seal Systems—Item No. 21051 RP0192-98 Monitoring Corrosion in Oil and Gas Production with Iron Counts—Item No. 21053 RP0292-2003 Installation of Thin Metallic Wallpaper Lining in Air Pollution Control and Other Process Equipment— Item No. 21054 RP0392-2001 Recovery and Repassivation After Low pH Excursions in Open Recirculating Cooling Water Systems—Item No. 21055 RP0492-99 Metallurgical and Inspection Requirements for Offshore Pipeline Bracelet Anodes—Item No. 21056 RP0592-2001 Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars in Concentrated (90 to 98%) Sulfuric Acid Service—Item No. 21057 RP0692-2003 Application of a Coating System to Exterior Surfaces of Steel Rail Cars—Item No. 21058 RP0892-2001 Coatings and Linings over Concrete for Chemical Immersion and Containment Service—Item No. 21060 RP0193-2001 External Cathodic Protection of On-Grade Carbon Steel Storage Tank Bottoms—Item No. 21061 RP0394-2002 Application, Performance, and Quality Control of Plant-Applied, Fusion-Bonded Epoxy External Pipe Coating—Item No. 21064 RP0195-2001 Recommended Practice for Corrosion Control of Sucker Rods by Chemical Treatment—Item No. 21069 RP0295-2003 Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars—Item 21070 RP0395-99 Fusion-Bonded Epoxy Coating of Steel Reinforcing Bars—Item No. 21071 RP0495-2003 Guidelines for Qualifying Personnel as Abrasive Blasters and Coating and Lining Applicators in the Rail Industries—Item 21072 RP0196-2004 Galvanic Anode Cathodic Protection of Internal Submerged Surfaces of Steel Water Storage Tanks —Item No. 21077 RP0296-2004 Guidelines for Detection, Repair, and Mitigation of Cracking of Existing Petroleum Refinery Pressure Vessels in Wet H2S Environments—Item No. 21078 RP0197-2004 Standard Format for Computerized Electrochemical Polarization Curve Data Files—Item No. 21080 RP0297-2004 Maintenance Painting of Electrical Substation Apparatus Including Flow Coating of Transformer Radiators—Item No. 21081 RP0497-2004 Field Corrosion Evaluation Using Metallic Test Specimens—Item No. 21083 RP0198-2004 The Control of Corrosion Under Thermal Insulation and Fireproofing Materials—A Systems Approach—Item No. 21084 RP0298-98 Sheet Rubber Linings for Abrasion and Corrosion Service—Item No. 21085 --```,,`````,,``,``,`,,`,,,``-`-`,,`,,`,`,,`--- Copyright NACE International Provided by IHS under license with NACE No reproduction or networking permitted without license from IHS October 2005 Licensee=ConPhil Loc 1-Houston TX/5919206101, User=chen, xiangrong Not for Resale, 11/05/2005 22:53:32 MST --```,,`````,,``,``,`,,`,,,``-`-`,,`,,`,`,,`--- RP0398-98 Recommendations for Training and Qualifying Personnel as Railcar Coating and Lining Inspectors— Item No. 21086 RP0199-2004 Installation of Stainless Chromium-Nickel Steel and Nickel-Alloy Roll-Bonded and Explosion-Bonded Clad Plate in Air Pollution Control Equipment—Item No. 21087 RP0399-2004 Plant-Applied External Coal Tar Enamel Pipe Coating Systems: Application, Performance, and Quality Control—Item No. 21089 RP0100-2004 Cathodic Protection of Prestressed Concrete Cylinder Pipelines—Item No. 21090 RP0200-2000 Steel-Cased Pipeline Practices—Item No. 21091 RP0300-2003 Pilot-Scale Evaluation of Corrosion and Fouling Control Additives for Open Recirculating Cooling Water Systems—Item No. 21092 RP0102-2002 In-Line Inspection of Pipelines—Item No. 21094 RP0302-2002 Selection and Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars in Molten Sulfur Service—Item No. 21095 RP0402-2002 Field-Applied Fusion-Bonded Epoxy (FBE) Pipe Coating Systems for Girth Weld Joints: Application, Performance, and Quality Control—Item No. 21096 RP0502-2002 Pipeline External Corrosion Direct Assessment Methodology—Item No. 21097 RP0602-2002 Field-Applied Coal Tar Enamel Pipe Coating Systems: Application, Performance, and Quality Control—Item No. 21098 RP0303-2003 Field-Applied Heat-Shrinkable Sleeves for Pipelines: Application, Performance, and Quality Control—Item No. 21101 RP0403-2003 Avoiding Caustic Stress Corrosion Cracking of Carbon Steel Refinery Equipment and Piping—Item No. 21102 RP0104-2005 The Use of Coupons for Cathodic Protection Monitoring Applications—Item No. 21105 RP0204-2004 Stress Corrosion Cracking (SCC) Direct Assessment Methodology—Item No. 21104 RP0304-2004 Design, Installation, and Operation of Thermoplastic Liners for Oilfield Pipelines—Item 21103 GENERAL DESCRIPTION OF NACE STANDARDS • Recommended practices include recommended methods of selection, design, installation, maintenance, or operation of material or system where corrosion is a factor. In addition, some recommended practices focus on details of construction of a corrosion control system; methods of treating the surface of materials to reduce corrosion; requirements for using devices to reduce corrosion; and procedures for increasing the effectiveness, safety, and economic benefits of an installation or system. • Test methods are tests related to corrosion prevention and control. This type of standard can give the method of conducting tests to ascertain the characteristics of a material, design, or operation. • Material requirements state the necessary characteristics of a material where corrosion is a factor in the selection, application, and maintenance of the material. October 2005 Copyright NACE International Provided by IHS under license with NACE No reproduction or networking permitted without license from IHS Licensee=ConPhil Loc 1-Houston TX/5919206101, User=chen, xiangrong Not for Resale, 11/05/2005 22:53:32 MST