Guide For LURAM- The Ultimate Windows RAMDISK tool (Passcode/Disabled) Requirements: • Windows PC / Laptop • USB Stick / Thumbdrive / Pendrive / Flash Drive (8GB + Recommended) Downloads: • 3uTools - 3u.com • Pwndfu ISO Image and LURam Latest Version https://mega.nz/folder/Q9hDzJpR#ZdjL1yQaAlExqDr2vP33vg Decryption Key : ZdjL1yQaAlExqDr2vP33vg Prerequisites: How To Fix Drivers For Windows (DO NOT SKIP) Remove the windows driver with the phone already connected 1.Go to device manager and remove it 2.Do not disconnect your device 3.Install the file in the Drives folder Verify Drivers: After Successful Installation, verify that the files are in the paths below /usb/ Now disconnect and connect your phone Open 3utools - Toolbox - Repair Drivers for Device Now Check Drivers Installed is Good Or Bad from Device Manager in PC Good Installation - Apple Mobile Device USB Driver Bad Installation - Apple Mobile Device USB Device Make Bootable USB for Pwndfu: 1.Download Pwndfu iso from Above Links 2.Open 3uTools - Flash & Jailbreak Option 3.Select Make Checkra1n Jailbreak USB Flashdrive 4.Select Local Image - Pwndfu iso 5.Start Making Bootable USB 6.Bootable Flash Drive is Ready BYPASS GUIDE: 1. Boot USB 2. Put Device in DFU Mode 3. Enter Pwndfu Mode 4. Restart PC to windows after Successful Pwndfu Verify drivers like before again to avoid errors 5. Open LURam Ramdisk Tool 6. Click “Connect iDevice” and Wait Success Notification. 7. Click “Boot Device” and Wait Success Notification. Note: Boot Device May take 1-3Minutes Depending Upon Your Internet Connection. Recommend to Use 15 MBPS Minimum. Boot May Fail in Low Internet. 8. Open Click Check SSH and Wait Success Notification. Note: If error - Open Device Manager and Verify Drivers again. Also use local driver from drive. 9. For Backup: Click “Backup Activation Files” 10. After Successful Backup, Restore Device to Latest iOS (No Data Restore/Quick Flash) 11. For Activation with Backup, Repeat from Step 1-8 12. Click “Activate iDevice” Enjoy Windows Ramdisk by LURam Ramdisk.