Sydney Opera House (Australia): Pattern Canon ® is a registered trademark of Canon Inc. © Canon Inc. © A & A Co., Ltd. Front view http://www.canon.com/c-park/en/ Side view Overhead view View of completed model Sydney Opera House (Australia) Designed by Danish architect Jorn Utzon, the striking silhouette of the Sydney Opera House, completed in 1973, recalls either the broad white sails of a ship or a row of seashells. This structure contains an opera hall, a concert hall, and four other halls. The greenery behind the Opera House includes the Royal Botanic Gardens and a school of music. This structure has come to symbolize the city of Sydney. *This model was designed for Papercraft and may differ from the original in some respects. Parts list (pattern): Fourteen A4 sheets (No.1 to No.14) No. of Parts: 66 *Build the model by carefully reading the Assembly Instructions, in the parts sheet page order. 1 Sydney Opera House (Australia): Pattern Canon ® is a registered trademark of Canon Inc. © Canon Inc. © A & A Co., Ltd. 1 2 Sydney Opera House (Australia): Pattern Canon ® is a registered trademark of Canon Inc. © Canon Inc. © A & A Co., Ltd. 2 3 Sydney Opera House (Australia): Pattern Canon ® is a registered trademark of Canon Inc. © Canon Inc. © A & A Co., Ltd. 3 Sydney Opera House Sydney, Australia 4 4 Sydney Opera House (Australia): Pattern Canon ® is a registered trademark of Canon Inc. © Canon Inc. © A & A Co., Ltd. 5 http://www.canon.com/c-park/en/ Canon ® is a registered trademark of Canon Inc. 6 5 © A & A Co., Ltd. Sydney Opera House (Australia): Pattern Canon ® is a registered trademark of Canon Inc. © Canon Inc. © A & A Co., Ltd. 9 7 8 10 a 10 c 10 b 6 Sydney Opera House (Australia): Pattern Canon ® is a registered trademark of Canon Inc. © Canon Inc. © A & A Co., Ltd. 10 11 10 a 10 a 10 b 10 a 10 a 10 b 10 b 10 b 10 7 12 Sydney Opera House (Australia): Pattern Canon ® is a registered trademark of Canon Inc. © Canon Inc. © A & A Co., Ltd. 13 14 15 16 10 c 8 Sydney Opera House (Australia): Pattern 21b 52 33 25b 52 55 45 18 25b 52 52 25b 55 21b 21b 21b 45 21b 21b 21b 17 Canon ® is a registered trademark of Canon Inc. © Canon Inc. © A & A Co., Ltd. 56 24b 33 56 38 35 33 24b 38 35 56 56 24b 33 22b 22b 22b 22b 19 22b 20 9 22b Sydney Opera House (Australia): Pattern Canon ® is a registered trademark of Canon Inc. © Canon Inc. © A & A Co., Ltd. 21 10b 10b 10b 27 21a 23 22a 21b 21b 21b 22 22b 22b 22b 27 24a 22b 22a 10a 10a 10a 10 Sydney Opera House (Australia): Pattern Canon ® is a registered trademark of Canon Inc. © Canon Inc. © A & A Co., Ltd. 24 24b 24b 10b 25b 25 24a 10a 10a 25a 10 25b 10b 10b 10b 26 27 24a 22a 24a 27 27 22a 21a 25a 28 10 a 29 10 a 11 Sydney Opera House (Australia): Pattern 31 33 33 Canon ® is a registered trademark of Canon Inc. © Canon Inc. © A & A Co., Ltd. 33 30 34 34 34 34 32 32 30 34 34 35 35 33 30 30 12 33 35 30 30 30 30 30 30 30 30 Sydney Opera House (Australia): Pattern Canon ® is a registered trademark of Canon Inc. © Canon Inc. © A & A Co., Ltd. 42 43 36 45 39 37 44 40 40 49 49 48 38 48 50 41 41 13 51 46 47 Sydney Opera House (Australia): Pattern 52 Canon ® is a registered trademark of Canon Inc. © Canon Inc. © A & A Co., Ltd. 56 57 55 54 58 59 60 53 61 61 14 12 Sydney Opera House (Australia): Assembly Instructions Canon ® is a registered trademark of Canon Inc. © Canon Inc. © A & A Co., Ltd. Before starting assembly:Writing the number of each section on its back side before cutting out the sections is highly recommended. (* This way, you can be sure which section is which even after cutting out the sections.) Indicates where sections should be glued together. http://www.canon.com/c-park/en/ (1) Build the base. 2 1 View of completed model *This model was designed for Papercraft and may differ from the original in some respects. Assembly Instructions: Six A4 sheets (No.1 to No.6) *Build the model by carefully reading the Assembly Instructions, in the parts sheet page order. 4 6 *Hint: Trace along the folds with a ruler and an exhausted pen (no ink) to get a sharper, easier fold. 8 Assembly Instructions Mountain fold(dotted line) Make a mountain fold. Valley fold(dashed and dotted line) Make a valley fold. Scissors line(solid line) Cut along the line. Cut in line(solid line) Cut along the line. Tools and materials Assembly tip Caution Glue The glue spot(colored dot) shows where to apply the glue. 5 Glue spot(Red dot) Glue parts with the same number together. ouse era H ey Op ustralia Sydn Sydney, A Glue spot(Green dot) Glue within the same part. Insert. Glue spot(Blue dot) Glue to the rear of the other part. Scissors, set square, glue(We recommend stick glue), pencil, used ballpoint pen, toothpicks, tweezers, (useful for handling small parts) Before gluing, crease the paper along mountain fold and valley fold lines and make sure rounded sections are nice and stiff. Glue, scissors and other tools may be dangerous to young children so be sure to keep them out of the reach of young children. 1 7 3 Sydney Opera House (Australia): Assembly Instructions Canon ® is a registered trademark of Canon Inc. © Canon Inc. © A & A Co., Ltd. (2) Build the fan-shaped foundation. 9 13 10 15 12 14 11 2 Sydney Opera House (Australia): Assembly Instructions (3) Build the lower level of the structure. Insert between the folded sides. 25 Canon ® is a registered trademark of Canon Inc. © Canon Inc. © A & A Co., Ltd. 21 Insert between the folded sides. Fold each of parts 21, 22, 24, and 25 before gluing them to part 17. 24 * Since folding these parts after gluing them to part 17 may cause the paper on the exterior to stick out or tear, be sure to glue these parts in place after folding them. Match the borders of the coloring when gluing these pieces together. 19 18 17 Insert between the folded sides. Match the borders of the coloring when gluing these pieces together. 20 22 When assembling this section, first attach parts 21, 22, 24, and 25 to part 17, then connect the parts together by adjusting the location of the connection between each part. Insert between the folded sides. 3 16 Sydney Opera House (Australia): Assembly Instructions Canon ® is a registered trademark of Canon Inc. © Canon Inc. © A & A Co., Ltd. 41 Glue in the same way as on the opposite side. 30 Glue along the dotted line. 34 31 23 26 33 27 Bend this piece slightly before gluing it. 28 41 Large hall Glue in the same way as part 29. (4) Build the large and small halls and the restaurant. 32 Assemble parts 33, 35, 38, 45, 52, 55, and 56 in the same general way. 35 40 Glue in the same way as on the opposite side. 39 Bend this piece slightly before gluing it. 38 Glue together. 29 36 37 Bend this piece slightly before gluing it. 37 40 36 Assemble parts 30, 32, 34, 39, 44, 50, 53, 54, 57, and 59 in the same general way. Glue one side to part 38 and one side to part 32. Glue parts 28, 29, 40, and 41 in place last, adjusting the assembled parts while doing so. 4 Sydney Opera House (Australia): Assembly Instructions 49 47 Small hall 50 Canon ® is a registered trademark of Canon Inc. © Canon Inc. © A & A Co., Ltd. Glue in the same way as part 46. Glue in the same way as on the opposite side. 54 53 55 59 60 Glue in the same way as on the opposite side. 48 57 Glue in the same way as on the opposite side. 56 52 45 44 61 Restaurant 51 Bend this piece slightly before gluing it. Bend this piece slightly before gluing it. 49 46 Glue in the same way as on the opposite side. 58 Bend this piece slightly before gluing it. Bend this piece slightly before gluing it. 43 61 48 42 Glue parts 46, 47, 48, 49, and 61 in place last, after assembling all these parts together, adjusting the assembled parts while doing so. Glue one side to the rear side of part 44 and one side to part 50. (5) Glue the large and small halls and the restaurant to (3) the lower section of the structure (3). Small hall Large hall Restaurant (3) Lower section of structure 5 Sydney Opera House (Australia): Assembly Instructions Canon ® is a registered trademark of Canon Inc. © Canon Inc. © A & A Co., Ltd. (6) Complete the model by gluing the base assembled in step (1) to the foundation assembled in step (2) and the structure assembled in step (5). (5) Structure (2) Foundation (1) Base Finished! 6
