RIIGGING G & AT ATTACH CHME CH MENT ME NTS NT S CHAIN SLINGS & COMPONENTS HERC-ALLOY® 1000 (GRADE 100) HERC-ALLOY 1000 ® Columbus McKinnon has a long history of developing innovative products that have changed the material handling industry – including the development of the first alloy chain in 1933. This alloy chain eventually replaced the industry-standard wrought iron chain used for overhead lifting and is the predecessor to today’s Herc-Alloy® 1000 chain, hooks and overhead lifting attachments. Made in America, CM Herc-Alloy® products are made of superior triple alloy steel that provides the best strength-to-weight performance in the industry. Herc-Alloy® 1000 chain meets ASTM A973 standards while components, such as hooks and Hammerloks®, meet ASTM A952 standards. Herc-Alloy® is now one of the most recognized and trusted brands in the rigging industry and is only offered by Columbus McKinnon. ® HERC-ALLOY 1000 PRODUCT OVERVIEW COMPONENTS Chain Size Triple & Quad at 60° Double at 60° Double at 90° CHAIN SLINGS & COMPONENTS The chart below is an overview of our most popular Herc-Alloy® 1000 products. Our full product offering, including detailed specifications and available sizes, can be found on the product pages within this section. 60 (in.) (mm.) 7/32 9/32 3/8 1/2 5/8 3/4 7/32 9/32 3/8 1/2 5/8 3/4 7/32 9/32 3/8 1/2 5/8 3/4 5.5 7 10 13 16 20 5.5 7 10 13 16 20 5.5 7 10 13 16 20 Working Load Limit (ton) 2,700 4,300 8,800 15,000 22,600 35,300 4,700 7,400 15,200 26,000 39,100 61,100 7,000 11,200 22,900 39,000 58,700 91,700 Chain (Per Ft.) Chain (Drum) Master Link SubAssembly Pear Shaped Master Link Page 62 Page 62 Page 64 Page 64 Page 65 Page 65 Page 66 Page 66 Page 67 Page 67 607321 607328 607339 607351 607363 607378 607321 607328 607339 607351 607363 607378 607321 607328 607339 607351 607363 607378 677310 677311 677313 677315 677316 677317 677310 677311 677313 677315 677316 677317 677310 677311 677313 677315 677316 677317 555231 555232 555235 555238 555238 555240 555231 555232 555235 555238 555240 555243 – – – – – – – – – – – – – – – – – – 555274 555275 555276 555277 555278 555279 554702 554702 554702 554706 554710 554714 554702 554702 554706 554710 554714 554719 554702 554706 554710 554714 554719 554726 667021-2 667028-2 667038-2 667050-2 667062-2 667075-2 667021-1 667028-2 667038-2 667050-2 667062-2 667075-2 – 667028-2 667029-2 667030-2 667031-2 667032-2 – M71805A-2 M71806A-2 M71808A-2 M71810A-2 – – M71805A-2 M71806A-2 M71808A-2 M71810A-2 – – M71805A-2 M71806A-2 M71808A-2 M71810A-2 – M7502A M7503A M7504A M7505A M7507A M7509A M7502A M7503A M7504A M7505A M7507A M7509A M7502A M7503A M7504A M7505A M7507A M7509A 657716 657718 657719 657720 657721 657722 657726 657718 657719 657720 657721 657722 – 657718 657719 657720 657721 657722 557716 557718 557719 557720 557721 557722 557716 557718 557719 557720 557721 557722 – 557718 557719 557720 557721 557722 Chain Hammerlok® Shortener Rigging Hook Clevlok® Clevlok® Sling Hook Sling Hook w/Latch w/o Latch C HA I N & R I G G I N G AT TA CHM ENT S (CM RP -6 ) PHONE: 800.888.0985 WWW.C M W OR K S .C OM CHAIN SLINGS & COMPONENTS HERC-ALLOY® 1000 (GRADE 100) COMPONENTS Triple & Quad at 60° Double at 60° Double at 90° Chain Size (in.) (mm.) 7/32 9/32 3/8 1/2 5/8 3/4 7/32 9/32 3/8 1/2 5/8 3/4 7/32 9/32 3/8 1/2 5/8 3/4 5.5 7 10 13 16 20 5.5 7 10 13 16 20 5.5 7 10 13 16 20 Working Load Limit (ton) 2,700 4,300 8,800 15,000 22,600 35,300 4,700 7,400 15,200 26,000 39,100 61,100 7,000 11,200 22,900 39,000 58,700 91,700 Eye Sling Hook w/Latch Eye Sling Clevlok® Cradle Hook Cradle Grab Eye Grab Hook w/o Latch Hook Clevlok® Foundry Hook Eye Foundry Hook Clevlok® Style Latchlok® Hook Eye Style Latchlok® Hook Bearing Bushing Swivel Style Swivel Style Latchlok® Latchlok® Hook Hook Page 67 Page 67 Page 68 Page 68 Page 69 Page 69 Page 70 Page 70 Page 71 Page 71 558618 558622 558625 558628 558629 558630 – 558622 558625 558628 558629 558630 – 558622 558625 558628 558629 558630 458618 458622 458625 458628 458629 458630 – 458622 458625 458628 458629 458630 – 458622 458625 458628 458629 458630 659718 659722 659725 659728 659729 – – 659722 659725 659728 659729 – – 659722 659725 659728 659729 – 559724 559725 559737 559750 559762 559775 – 559725 559737 559750 559762 559775 – 559725 559737 559750 559762 559775 – 475798 475799 475800 475801 – – 475798 475799 475800 475801 – – 475798 475799 475800 475801 – – 474798 474799 474800 474801 474802 – 474798 474799 474800 474801 474802 – 474798 474799 474800 474801 474802 – M616005 M616010 M616015 M616020 – – M616005 M616010 M616015 M616020 – – M616005 M616010 M616015 M616020 – – M626005 M626010 M626015 M626020 – – M626005 M626010 M626015 M626020 – – M626005 M626010 M626015 M626020 – – M696005 M696010 M696015 M696020 – – M696005 M696010 M696015 M696020 – – M696005 M696010 M696015 M696020 – – M676005 M676010 M676015 M676020 – – M676005 M676010 M676015 M676020 – – M676005 M676010 M676015 M676020 – CHAI N & R I GGI NG ATTACHMEN TS (C MR P -6) W WW. C M W O R K S . CO M PHONE: 800.888.0985 HERC-ALLOY® 1000 CHAIN SLINGS & COMPONENTS To help customers reduce and better manage their rigging inventory, Columbus McKinnon has developed several DUAL-RATED RIGGING ATTACHMENTS that can be used for both Grade 80 and 100 applications. 61 RIIGGING G & AT ATTACH CHME CH MENT ME NTS NT S CHAIN SLINGS & COMPONENTS HERC-ALLOY® 1000 (GRADE 100) ® HERC-ALLOY 1000 CHAIN WORKING LOAD LIMIT: 2,700 TO 35,300 LBS. BENEFITS & FEATURES S Meets ASTM A973 & NACM standards andards 25% higher working load limit when compared to Grade 80 Environmentally friendly black coating for distinct appearance and ease of identification Certification included with everyy drum 100% proof tested B C 1000 A Nominal Chain Dimensions (in.) HERC-ALLOY® 1000 CHAIN SLINGS & COMPONENTS Chain Size (in.) Working Load Limit (lbs.) 7/32 9/32 3/8 1/2 5/8 3/4 2,700 4,300 8,800 15,000 22,600 35,300 Per Foot Per Drum Material Diameter A Inside Length B Inside Width C Product Code Weight (lbs./ft.) Approximate Number of Links (per ft.) Product Code Length (ft.) Weight (lbs.) 0.22 0.28 0.39 0.51 0.63 0.79 0.68 0.88 1.25 1.56 1.92 2.40 0.31 0.40 0.57 0.73 0.86 1.07 607321 607328 607339 607351 607363 607378 0.44 0.73 1.44 2.46 3.70 5.77 17.8 13.6 9.6 7.7 6.3 5.0 677310 677311 677313 677315 677316 677317 800 500 500 300 200 100 354 365 720 738 740 577 INSPECTION, CARE & USE HOW TO SELECT AND ORDER THE PROPER CHAIN SLING 1. Determine the weight and configuration of the load(s) to be lifted. 2. Determine the type of chain sling required, according to weight and configuration. (See page 31 for standard sling configurations.) 3. Determine the size of the body chain according to the working load limits. Be sure to take into consideration the effect of the required angle. The working load limit is the maximum load in pounds which should be applied in direct tension to a straight length of chain. Note: Working load limit can be affected by angles of loading, type of hitch used, environmental conditions such as hot and cold temperatures, and D/d ratio. 4. Determine the reach required to give the desired angle. The reach is measured from the upper bearing surface of the master link to the bearing surface of the lower attachment. If chain slings are to be used in pairs and are to be matched for reach, please indicate when ordering. 5. Know share of load on pick points and location of center of gravity. See pages 26 through 32 for more information, or visit us at www.cmworks.com 62 C HA I N & R I G G I N G AT TA CHM ENT S (CM RP -6 ) PHONE: 800.888.0985 WWW.C M W OR K S .C OM R GG RI GGIN ING IN G & AT ATT TACH HMENT NT TS CHAIN SLINGS & COMPONENTS HERC-ALLOY® 1000 (GRADE 100) ® HERC-ALLOY 1000 CHAIN SLINGS DOUBLE (2 LEGS) TRIPLE (3 LEGS) DOUBLE ENDLESS SINGLE ENDLESS QUADRUPLE (4 LEGS) HERC-ALLOY® 1000 CHAIN SLINGS & COMPONENTS SINGLE LEG (VERTICAL) SINGLE SIN GLE BASKET ADJUST-A-LINK SINGLE ADJUSTABLE DOUBLE O BASKET DOUBLE ADJUSTABLE Adjusters on slings allow for easy and safe take up of chain when applications require shorter leg lengths or when lifting objects of abnormal sizes. There are two styles of adjusters: Style A and Style B. Style A is commonly used for shorter reach slings and consists of a hook attached to the link. Style B has 12" of chain in between link and hook gives you more flexibility on longer slings. Note: Adjusters are also available on single, double, triple and quad slings. Working Load Limits for Sling Types Show Above Chain Size (in.) 7/32 9/32 3/8 1/2 5/8 3/4 Single (1 leg) Single Choker 90º (lbs.) 90º (lbs.) 60º (lbs.) 45º (lbs.) 30º (lbs.) 60º (lbs.) 45º (lbs.) 30º (lbs.) 60º (lbs.) 45º (lbs.) 2,700 4,300 8,800 15,000 22,600 35,300 2,100 3,500 7,100 12,000 18,100 28,300 4,700 7,400 15,200 26,000 39,100 61,100 3,800 6,100 12,400 21,200 32,000 49,900 2,700 4,300 8,800 15,000 22,600 35,300 7,000 11,200 22,900 39,000 58,700 91,700 5,700 9,100 18,700 31,800 47,900 74,900 4,000 6,400 13,200 22,500 33,900 53,000 7,000 11,200 22,900 39,000 58,700 91,700 5,700 9,100 18,700 31,800 47,900 74,900 Double (2 legs) Triple (3 legs) Single Basket Double Basket Single Endless Double Endless 30º (lbs.) 60º (lbs.) 60º (lbs.) 90º (lbs.) 60º (lbs.) 4,000 6,400 13,200 22,500 33,900 53,000 4,700 7,400 15,200 26,000 39,100 61,100 7,000 11,200 22,900 39,000 58,700 91,700 2,700 4,300 8,800 15,000 22,600 35,300 4,700 7,400 15,200 26,000 39,100 61,100 Quad (4 legs) American Society of Mechanical Engineers ASME B30.9, the National Association of Chain Manufacturers (NACM) and the Occupation Safety & Health Administration (OSHA) recommend only the use of alloy steel chain for overhead lifting, i.e. sling chain. Slings may be constructed by the user using Herc-Alloy® chain, Herc-Alloy 1000 or Herc-Alloy 800 chain and attachments. For more information on standard sling configurations, see page 31 or visit us online at www.cmworks.com CHAI N & R I GGI NG ATTACHMEN TS (C MR P -6) W WW. C M W O R K S . CO M PHONE: 800.888.0985 63 RIIGGING G & AT ATTACH CHME CH MENT ME NTS NT S CHAIN SLINGS & COMPONENTS HERC-ALLOY® 1000 (GRADE 100) MASTER LINK DUAL RATED FOR USE WITH HA800 OR HA1000 WORKING LOAD LIMIT: 5,400 TO 105,900 LBS. BENEFITS & FEATURES May be used for mechanical and welded sling assemblies 100% proof tested Accepts both Herc-Alloy® 1000 & 800 chain and components Durable orange powder coated finish Can be used with included angles up to 120° B 120º A C Nominal Dimensions (in.) HERC-ALLOY® 1000 CHAIN SLINGS & COMPONENTS Trade Size (in.) Working Load Limit (lbs.) Catalog Number Product Code Material Diameter A Inside Length B Inside Width C Weight (lbs.) 13/32 1/2 3/4 1 1-1/4 1-1/2 1-3/4 5,400 8,600 17,600 30,000 45,200 70,600 105,900 HA40 HA50 HA75 HA100 Ha125 HA150 HA175 555231 555232 555235 555238 555240 555243 555246 0.41 0.56 0.75 1.00 1.25 1.50 1.75 3.00 5.00 5.50 7.00 8.75 10.50 12.00 1.50 2.50 2.75 3.50 4.38 5.25 6.00 0.33 1.02 2.08 4.59 9.31 15.60 24.40 Type and Size of Chain Sling on Which Used (in.) Single Double Triple Quad 7/32 9/32 3/8 1/2 & 5/8 3/4 – – 7/32 9/32 3/8 1/2 5/8 3/4 – – 7/32 9/32 3/8 1/2 5/8 3/4 – 7/32 9/32 3/8 1/2 5/8 3/4 SUB-ASSEMBLY DUAL RATED FOR USE WITH HA800 OR HA1000 WORKING LOAD LIMIT: 7,000 TO 91,700 LBS. BENEFITS & FEATURES Designed for triple and Durable orange quad branch Herc-Alloy® powder coated finish chain slings May be used for mechanical or welded Consists of an oblong sling assemblies master link and two welded master coupling links 100% proof tested Accepts both Herc-Alloy 1000 & 800 chain and components C A Can be used with included angles up to 120° B F 120º D E 64 Master Link Nominal Dimensions (in.) Trade Size (in.) Working Load Limit at 60º (lbs.) Catalog Number Product Code 1/2 3/4 1 1-1/4 1-1/2 1-3/4 7,000 11,200 22,900 39,000 58,700 91,700 SA050 SA075 SA100 SA125 SA150 SA175 555274 555275 555276 555277 555278 555279 Intermediate Link Nominal Dimensions (in.) Material Diameter A Inside Length B Inside Width C Material Diameter D Inside Width E Inside Length F 0.56 0.75 1.00 1.25 1.50 1.75 5.00 5.50 7.00 8.75 10.50 12.00 2.50 2.75 3.50 4.38 5.25 6.00 0.44 0.47 0.78 0.91 1.13 1.50 1.06 0.88 1.50 1.75 2.25 2.75 1.75 1.56 2.63 3.13 4.00 5.25 Weight (lbs.) 1.35 2.64 7.25 13.51 24.28 44.58 Type and Size of Chain Sling on Which Used (in.) Triple Quad 7/32 9/32 3/8 1/2 5/8 3/4 7/32 9/32 3/8 1/2 5/8 3/4 C HA I N & R I G G I N G AT TA CHM ENT S (CM RP -6 ) PHONE: 800.888.0985 WWW.C M W OR K S .C OM R GG RI GGIN ING IN G & AT ATT TACH HMENT NT TS CHAIN SLINGS & COMPONENTS HERC-ALLOY® 1000 (GRADE 100) ® PEAR SHAPED MASTER LINK HERC-ALLOY 1000 WORKING LOAD LIMIT: 9,000 TO 125,200 LBS. BENEFITS & FEATURES Made from alloy material Proof tested at two times WLL Durable orange powder coated finish Custom sizes available upon request C A B D Working Load Limit (lbs.) Product Code 1/2 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 9,000 18,000 30,300 45,500 71,200 86,000 120,000 125,200 554702 554706 554710 554714 554719 554723 554726 554731 Diameter A Inside Length B Inside Width C Inside Width D 0.56 0.75 1.00 1.25 1.50 1.75 2.00 2.25 5.31 5.63 7.25 8.75 10.50 12.00 14.00 16.00 2.50 2.75 3.50 4.63 5.25 6.00 7.00 8.00 1.25 2.00 2.63 3.25 3.88 4.50 3.50 6.00 Weight (lbs.) 0.81 2.08 4.59 9.17 15.28 23.93 35.93 52.83 Single (in.) Double (in.) Triple (in.) 7/32, 9/32 & 3/8 1/2 5/8 3/4 – – – – 7/32 & 9/32 3/8 1/2 5/8 3/4 – – – 7/32 9/32 3/8 1/2 5/8 – 3/4 – HERC-ALLOY® 1000 CHAIN SLINGS & COMPONENTS Type and Size of Chain Sling Nominal Dimensions (in.) Trade Size (in.) ® HAMMERLOK DUAL RATED FOR USE WITH HA800 OR HA1000 WORKING LOAD LIMIT: 2,700 TO 35,300 LBS. BENEFITS & FEATURES Used for overhead lifting slings to connect chain branches to the master link and the hook to attachments. Constructed of drop forged alloy steel Can be used with Grade 100 and Grade 80 chain Must be matched to chain size Do not use for chain repair or splicing Meets ASTM A952 standards. Dimensions (in.) Size (in.) Working Load Limit (lbs.) Product Code Load Pin Kit Product Code A (Max) B (Max) C D E F G Weight (lbs.) 7/32 9/32 3/8 1/2 5/8 3/4 2,700 4,300 8,800 15,000 22,600 35,300 667021-2 667028-2 667038-2 667050-2 667062-2 667075-2 R667021-2 R667028-2 R667038-2 R667050-2 R667062-2 R667075-2 0.29 0.37 0.52 0.64 0.81 0.97 0.28 0.44 0.50 0.68 0.91 1.07 1.85 1.94 3.02 3.79 4.50 5.36 0.69 0.69 1.15 1.43 1.70 2.06 0.61 0.68 1.05 1.29 1.54 1.78 1.44 1.58 2.33 2.98 3.57 4.69 0.52 0.61 0.81 1.10 1.32 1.52 0.27 0.28 0.84 1.87 3.13 5.75 CHAI N & R I GGI NG ATTACHMEN TS (C MR P -6) W WW. C M W O R K S . CO M PHONE: 800.888.0985 65 RIIGGING G & AT ATTACH CHME CH MENT ME NTS NT S CHAIN SLINGS & COMPONENTS HERC-ALLOY® 1000 (GRADE 100) ® CHAIN SHORTENER HERC-ALLOY 1000 WORKING LOAD LIMIT: 4,300 TO 22,600 LBS. BENEFITS & FEATURES Quickly and easily adjust chain length of sling when the load has uneven pick points Durable orange powder coated finish Marked with both fraction and metric sizes Forged alloy steel – quenched & tempered Mechanically attaches directly to master ring T C S (PIN DIA) M G F (PIN DIA) L H D J K HERC-ALLOY® 1000 CHAIN SLINGS & COMPONENTS Size (in.) Working Load Limit (lbs.) Product Code Standard Package C D G H J K L F M S T Weight (lbs.) 9/32 3/8 1/2 5/8 4,300 8,800 15,000 22,600 M71805A-2 M71806A-2 M71808A-2 M71810A-2 10 10 10 5 0.69 1.15 1.43 1.74 2.16 2.74 3.34 4.19 5.86 7.61 9.36 11.56 0.38 0.47 0.65 0.79 0.80 1.17 1.38 1.53 1.00 1.41 2.07 2.46 0.36 0.51 0.63 0.75 0.38 0.47 0.65 0.79 3.38 4.74 5.82 7.04 0.21 0.31 0.41 0.48 0.54 0.71 0.93 1.06 1.20 2.50 4.80 8.20 Dimensions (in.) Note: If used as a choker, working load limit should be reduced by 20%. RIGGING HOOK DUAL RATED FOR USE WITH HA800 OR HA1000 WORKING LOAD LIMIT: 2,700 TO 22,600 LBS. BENEFITS & FEATURES For use with both Grade 80 & 100 chain Large eye to easily accommodate other fittings Quench & tempered alloy steel Durable orange powder coated finish A C B J R L O K F P T G H K D 66 Size (in.) Working Load Limit (lbs.) With Latch Without Latch Latch Kit 7/32 9/32 5/16 3/8 1/2 5/8 2,700 4,300 5,700 8,800 15,000 22,600 M7502A M7503A M7504A M7505A M7507A M7509A M7402A M7403A M7404A M7405A M7407A M7409A 4X1302 4X1303 4X1304 4X1305 4X1307 4X1309 Product Code Dimensions (in.) Standard Package A B C D F G H J K L O P R T Weight (lbs.) 10 10 10 10 5 5 1.50 1.75 2.13 2.50 3.08 3.88 0.74 0.86 1.10 1.23 1.55 1.98 0.38 0.45 0.52 0.64 0.77 0.95 3.12 3.37 3.79 4.24 5.10 6.24 1.25 1.38 1.50 1.63 2.00 2.50 0.87 0.94 1.07 1.26 1.44 1.82 1.01 1.11 1.23 1.43 1.63 2.01 0.93 0.97 1.02 1.19 1.50 1.78 0.63 0.71 0.88 0.94 1.38 1.68 4.37 5.04 5.65 6.54 7.98 10.07 0.93 0.97 1.02 1.16 1.41 1.69 2.13 2.27 2.56 2.85 3.47 4.59 3.12 3.66 4.08 4.67 5.77 7.31 0.87 0.97 1.03 1.21 1.47 1.71 0.66 1.12 1.46 2.42 4.10 8.16 C HA I N & R I G G I N G AT TA CHM ENT S (CM RP -6 ) PHONE: 800.888.0985 WWW.C M W OR K S .C OM R GG RI GGIN ING IN G & AT ATT TACH HMENT NT TS CHAIN SLINGS & COMPONENTS HERC-ALLOY® 1000 (GRADE 100) ® CLEVLOK SLING HOOK DUAL RATED FOR USE WITH HA800 OR HA1000 WORKING LOAD LIMIT: 2,700 TO 35,300 LBS. BENEFITS & FEATURES For use with both Grade 80 & 100 chain Fatigue rated to Grade 100 specifications 100% proof tested Durable orange powder coated finish Improved forged latch New CE compliant hooks and latches Meets EN 1677 Fraction and metric markings O H H L L M (MIN) R G G R M (MIN) P P I Size (in.) 7/32 9/32 3/8 1/2 5/8 3/4 Working Load Limit Standard Package (lbs.) 2,700 4,300 8,800 15,000 22,600 35,300 10 10 10 5 5 Bulk D Product Code With Latch Without Latch 657716 657718 657719 657720 657721 657722 557716 557718 557719 557720 557721 557722 Latch Kit Dimensions (in.) D G H I L M O P R Weight (lbs.) 3.05 3.53 4.54 5.48 6.20 7.63 5.00 5.55 6.93 8.28 9.61 11.79 0.31 0.38 0.47 0.58 0.71 0.88 0.66 0.75 1.00 1.33 1.47 1.88 0.28 0.36 0.51 0.63 0.75 0.94 0.96 0.83 1.06 1.38 1.69 2.09 1.13 1.32 1.34 1.87 2.11 2.55 0.94 1.11 1.51 1.55 1.83 2.51 3.45 3.75 4.58 5.59 6.44 7.74 1.10 1.20 2.21 4.22 6.64 11.22 Alloy Load Retaining Pin Pin 4X455321 SP595778 4X455322 595780SP 4X455325 595781 4X455328 595782 4X455329 SP595783P 4X455330 595786 495826 495825 495825 495823 495849 495824 HERC-ALLOY® 1000 CHAIN SLINGS & COMPONENTS D EYE SLING HOOK DUAL RATED FOR USE WITH HA800 OR HA1000 WORKING LOAD LIMIT: 2,700 TO 35,300 LBS. BENEFITS & FEATURES For use with both Grade 80 & 100 chain Fatigue rated to Grade 100 specifications Available with or without latch Durable orange powder coated finish 100% proof tested Fraction and metric markings B H L M N O E S I P K D Product Code Size (in.) Working Load Limit (lbs.) With Latch Without Latch Latch Kit 7/32 9/32 3/8 1/2 5/8 3/4 2,700 4,300 8,800 15,000 22,600 35,300 558618 558622 558625 558628 558629 558630 458618 458622 458625 458628 458629 458630 4X458321 595523 595525 595528 595529 595530 G Dimensions (in.) Standard Package B D E G H I K L M N O P S Weight (lbs.) 10 10 10 5 5 Bulk 1.50 1.65 2.06 2.63 3.06 3.50 3.04 3.48 4.33 5.50 6.23 7.82 1.30 1.50 1.88 2.25 2.63 3.00 5.06 5.25 6.66 8.16 9.63 11.38 0.38 0.45 0.58 0.77 0.89 1.00 0.66 0.75 0.97 1.10 1.46 1.69 1.47 1.75 2.19 2.56 2.62 3.47 0.75 0.72 0.91 1.09 1.31 1.50 3.75 3.75 4.77 5.67 6.50 7.81 0.97 1.19 1.44 1.78 2.03 2.50 0.99 1.21 1.46 1.91 2.20 2.82 0.94 1.05 1.31 1.68 2.23 2.58 0.99 1.10 1.29 1.63 1.69 2.31 0.8 1.1 1.9 4.5 7.3 11.4 CHAI N & R I GGI NG ATTACHMEN TS (C MR P -6) W WW. C M W O R K S . CO M PHONE: 800.888.0985 67 RIIGGING G & AT ATTACH CHME CH MENT ME NTS NT S CHAIN SLINGS & COMPONENTS HERC-ALLOY® 1000 (GRADE 100) ® CLEVLOK CRADLE GRAB HOOK DUAL RATED FOR USE WITH HA800 OR HA1000 WORKING LOAD LIMIT: 2,700 TO 35,300 LBS. BENEFITS & FEATURES For use with both Grade 80 & 100 chain Meets ASTM A952 standards 100% proof tested Durable orange powder coated finish Fraction and metric markings J H L G M R P K D Dimensions (in.) HERC-ALLOY® 1000 CHAIN SLINGS & COMPONENTS Size (in.) Working Load Limit (lbs.) Product Code Standard Package Quantity D G H J K L M P R Weight (lbs.) 7/32 9/32 3/8 1/2 5/8 3/4 2,700 4,300 8,800 15,000 22,600 35,300 659718 659722 659725 659728 659729 659730 10 10 10 5 5 Bulk 1.62 2.18 2.72 3.65 4.50 5.40 3.21 3.39 4.33 5.27 6.54 8.80 0.31 0.38 0.47 0.65 0.77 0.88 0.75 0.82 1.18 1.39 1.55 2.05 0.94 0.97 1.29 2.01 2.42 2.69 0.28 0.36 0.51 0.63 0.75 0.88 0.31 0.38 0.74 0.60 0.77 0.91 0.62 0.82 1.03 1.19 1.41 1.89 1.98 1.86 2.47 3.04 3.76 5.30 0.50 0.63 1.30 2.10 4.20 10.50 Note: If used as a choker, working load limit should be reduced by 20%. Reference CM Rigging Guide for more details. EYE CRADLE GRAB HOOK DUAL RATED FOR USE WITH HA800 OR HA1000 WORKING LOAD LIMIT: 2,700 TO 35,300 LBS. BENEFITS & FEATURES For use with both Grade 80 & 100 chain Meets ASTM A952 standards 100% proof tested Durable orange powder coated finish Fraction and metric markings B H L M E G K P I D Size (in.) Working Load Limit (lbs.) Product Code Standard Package Quantity B D E G H I K L M P Weight (lbs.) 7/32 9/32 3/8 1/2 5/8 3/4 2,700 4,300 8,800 15,000 22,600 35,300 559724 559725 559737 559750 559762 559775 10 10 10 5 5 Bulk 1.20 1.40 1.78 2.28 2.75 3.50 1.68 1.93 2.86 3.69 4.53 5.23 0.31 0.37 0.47 0.59 0.75 0.91 3.22 3.72 4.81 6.36 7.62 9.54 0.33 0.39 0.52 0.63 0.75 1.00 0.92 1.07 1.38 1.81 2.13 2.88 0.99 1.15 1.66 2.15 2.65 3.55 0.55 0.63 0.75 1.06 1.25 1.52 2.20 2.58 3.27 4.23 5.06 6.70 0.69 0.76 1.02 1.53 1.80 1.85 0.35 0.55 1.39 3.05 4.36 9.00 Dimensions (in.) Note: If used as a choker, working load limit should be reduced by 20%. 68 C HA I N & R I G G I N G AT TA CHM ENT S (CM RP -6 ) PHONE: 800.888.0985 WWW.C M W OR K S .C OM R GG RI GGIN ING IN G & AT ATT TACH HMENT NT TS CHAIN SLINGS & COMPONENTS HERC-ALLOY® 1000 (GRADE 100) ® ® CLEVLOK FOUNDRY HOOK HERC-ALLOY 1000 WORKING LOAD LIMIT: 4,300 TO 35,300 LBS. BENEFITS & FEATURES Clevlok® head designed for easy assembly “I” beam body design increases grip when removing from load Quench & tempered alloy steel Individually proof tested Durable orange powder coated finish J H (PIN DIA) L G M R P K Size (in.) Working Load Limit (lbs.) 9/32 3/8 1/2 5/8 3/4 4,300 8,800 15,000 22,600 35,300 Clevlok Foundry Hook Alloy Load Pin Retaining Pin Product Code Standard Package Quantity Weight (lbs.) Product Code Product Code D G H J K L M P R 475798 475799 475800 475801 475802 5 5 5 5 5 2.43 4.14 7.10 12.03 21.00 595780 595781 SP595782 595785 495784 602326 495821T 495823 495823 495824 4.82 5.73 6.83 7.94 9.17 6.52 7.87 9.40 10.98 13.20 0.35 0.47 0.59 0.70 0.88 1.00 1.16 1.50 1.74 2.05 1.00 1.27 1.50 1.81 2.00 0.36 0.51 0.63 0.75 0.91 2.55 3.05 3.55 4.07 4.50 1.24 1.43 1.75 2.03 2.63 4.59 5.59 6.58 7.69 8.87 Dimensions (in.) EYE FOUNDRY HOOK DUAL RATED FOR USE WITH HA800 OR HA1000 HERC-ALLOY® 1000 CHAIN SLINGS & COMPONENTS D WORKING LOAD LIMIT: 4,300 TO 35,300 LBS. BENEFITS & FEATURES For use with both Grade 80 & 100 chain Throat opening to 4.5" (114 mm) Meets ASTM A952 standards Durable orange powder coated finish 100% proof tested For welded 7/32" chain sling use 9/32" eye foundry hook H B L G (REF) N M O I R (SPHER.) E K D (REF) Size (in.) Working Load Limit (lbs.) Product Code Standard Package Quantity B D E G H I K L M N O R Weight (lbs.) 9/32 3/8 1/2 5/8 3/4 4,300 8,800 15,000 22,600 35,300 474798 474799 474800 474801 474802 5 5 5 5 Bulk 1.56 2.00 2.50 3.00 3.50 4.73 5.72 6.74 7.79 9.07 2.50 3.00 3.50 4.00 4.50 6.45 7.88 9.38 10.97 12.81 0.47 0.63 0.75 0.88 1.00 1.00 1.27 1.50 1.81 2.20 1.56 1.88 2.22 2.63 3.00 0.63 0.80 1.00 1.13 1.50 4.75 5.77 6.88 8.06 9.25 2.50 3.00 3.50 4.00 4.50 1.23 1.50 1.75 2.03 2.56 0.25 0.31 0.38 0.44 0.50 2.4 4.5 7.1 11.6 20.0 Dimensions (in.) CHAI N & R I GGI NG ATTACHMEN TS (C MR P -6) W WW. C M W O R K S . CO M PHONE: 800.888.0985 69 RIIGGING G & AT ATTACH CHME CH MENT ME NTS NT S CHAIN SLINGS & COMPONENTS HERC-ALLOY® 1000 (GRADE 100) ® LATCHLOK HOOK USE Working load limits are based on chain size. Hooks are embossed with the chain size they attach to and are not embossed with the working load limit (WLL). Example: A 9/32" hook embossed (HA1000 9/32") means it’s a Grade 100 hook for 9/32" Grade 100 chain with a working load limit of 4,300 lbs. If you are putting it on Grade 80 chain you derate to the 9/32" Grade 80 rating of 3,500 lbs. The chart below shows the working load limit of Latchlok® hooks when used with Grade 100 and Grade 80 chain slings. It also provides working load limit information for these hooks when used with synthetic web, round or wire rope slings. Attachment Type Hook Size: 9/32" Hook Size: 3/8" Hook Size: 1/2" Hook Size: 5/8" Maximum WLL: 4,300 lbs. Maximum WLL: 8,800 lbs. Maximum WLL: 15,000 lbs. Maximum WLL: 22,600 lbs. When used with Herc-Alloy® chain use the working load limits stated below. Chain WLL are based on 4:1 design. Size (in.) WLL 4:1 (lbs.) Size (in.) WLL 4:1 (lbs.) Size (in.) WLL 4:1 (lbs.) Size (in.) WLL 4:1 (lbs.) Herc-Alloy® 800 Chain Herc-Alloy® 1000 Chain 9/32 9/32 3,500 4,300 3/8 3/8 7,100 8,800 1/2 1/2 12,000 15,000 5/8 5/8 18,000 22,600 Synthetic web, round and wire rope slings have a 5:1 design factor. If you wish to use these hooks with these slings and maintain the 5:1 sling design factor, use the WLL below. Size (in.) WLL 5:1 (lbs.) Size (in.) WLL 5:1 (lbs.) Size (in.) WLL 5:1 (lbs.) Size (in.) WLL 5:1 (lbs.) Synthetic Web, Round and Wire Rope Slings 9/32 3,500 3/8 7,100 1/2 12,000 5/8 18,000 Always use proper connecting hardware with web, round and wire rope slings. Never choke slings in the eye of the hook. ® ® CLEVLOK STYLE LATCHLOK HOOK HERC-ALLOY 1000 ® H WORKING LOAD LIMIT: 4,300 TO 22,600 LBS. J HERC-ALLOY® 1000 CHAIN SLINGS & COMPONENTS L Pin ø BENEFITS & FEATURES F High-cycling, long-life spring 100% proof tested Meets ASTM A952 standards Durable orange powder coated finish Positive locking hook M G Reach P D K Size (in.) Working Load Limit (lbs.) Product Code Replace Latch Kit Part # H M P D F J K G L Weight (lbs.) 9/32 3/8 1/2 5/8 4,300 8,800 15,000 22,600 M616005 M616010 M616015 M616020 656005 656010 656015 656020 0.35 0.45 0.59 0.71 5.05 6.08 7.88 8.96 0.88 1.07 1.58 1.97 3.77 4.76 6.26 7.37 1.64 2.26 2.91 3.22 1.00 1.17 1.50 1.74 0.91 1.15 1.47 1.85 6.61 7.98 10.54 12.19 0.36 0.51 0.63 0.75 2.40 4.20 9.00 14.00 Dimensions (in.) ® EYE STYLE LATCHLOK HOOK HERC-ALLOY® 1000 WORKING LOAD LIMIT: 4,300 TO 22,600 LBS. H A BENEFITS & FEATURES Large eye design for use with chain, wire rope and synthetic material 100% proof tested Meets ASTM A952 standards Durable orange powder coated finish For welded 7/32" chain sling use 9/32" eye Lodelok hook Positive locking hook 70 F M (Reach) P D K Size (in.) Working Load Limit (lbs.) Product Code Replace Latch Kit Part # A M P D F H K Weight (lbs.) 9/32 3/8 1/2 5/8 4,300 8,800 15,000 22,600 M626005 M626010 M626015 M626020 656005 656010 656015 656020 1.09 1.36 1.57 2.00 5.37 6.65 8.79 10.37 0.88 1.07 1.58 1.97 3.77 4.74 6.26 7.37 1.64 2.27 2.91 3.22 0.47 0.59 0.80 1.03 0.91 1.15 1.47 1.85 2.50 4.74 10.00 16.00 Dimensions (in.) C HA I N & R I G G I N G AT TA CHM ENT S (CM RP -6 ) PHONE: 800.888.0985 WWW.C M W OR K S .C OM R GG RI GGIN ING IN G & AT ATT TACH HMENT NT TS CHAIN SLINGS & COMPONENTS HERC-ALLOY® 1000 (GRADE 100) ® SWIVEL STYLE LATCHLOK HOOKS HERC-ALLOY 1000 ® WORKING LOAD LIMIT: 4,300 TO 22,600 LBS. BENEFITS & FEATURES OF BOTH STYLES The eye easily positions to attach to the load 100% proof tested Meets ASTM A952 standards Certification of test available Durable orange powder coated finish For welded 7/32" chain sling use 9/32" swivel Lodelok hook Positive locking hook DID YOU KNOW? BEARING VS. BUSHING STYLE SWIVEL HOOKS BUSHING SWIVEL HOOKS The load must be swiveled and turned into position BEFORE attaching, lifting or moving a load. BEARING STYLE SWIVEL HOOK For more information, visit us at BUSHING STYLE SWIVEL HOOK www.cmworks.com A BEARING SWIVEL STYLE H B Size (in.) Working Load Limit (lbs.) Product Code Replace Latch Kit Part # H M P D F A B K Weight (lbs.) 9/32 3/8 1/2 5/8 4,300 8,800 15,000 22,600 M696005 M696010 M696015 M696020 656005 656010 656015 656020 0.62 0.77 0.93 1.00 7.43 9.11 11.49 13.73 0.88 1.07 1.58 1.97 3.77 4.76 6.26 7.37 1.64 2.26 2.91 3.22 1.50 1.75 2.25 2.50 1.31 1.62 1.82 2.16 0.91 1.15 1.47 1.85 3.5 4.8 10.7 17.4 Dimensions (in.) F M (Reach) P D K A BUSHING SWIVEL STYLE Size (in.) Working Load Limit (lbs.) Product Code Replace Latch Kit Part # H M P D F A B K Weight (lbs.) 9/32 3/8 1/2 5/8 4,300 8,800 15,000 22,600 M676005 M676010 M676015 M676020 656005 656010 656015 656020 0.62 0.77 0.93 1.00 7.17 8.73 11.18 13.35 0.88 1.07 1.58 1.97 3.77 4.76 6.26 7.37 1.64 2.26 2.91 3.22 1.50 1.75 2.00 2.75 1.33 1.63 1.76 2.38 0.91 1.15 1.47 1.85 3.5 4.8 10.6 17.0 Dimensions (in.) HERC-ALLOY® 1000 CHAIN SLINGS & COMPONENTS BEARING SWIVEL HOOKS The load may be swiveled and turned into position WITH or WITHOUT the load attached. H B F M (Reach) P D K INSPECTION, CARE & USE USING LATCHLOK® HOOKS SAFELY V V V Do not apply load unless latch and hook are completely closed and locked Make certain that the latch does not support any part of the load When lifting, make certain that the load is firmly seated in the base (bowl) of the hook V V V Inspect hook and latch periodically. If the hook or latch is damaged or if the latch fails to interlock with the tip, the hook should be removed from service Do not exceed the working load limit Do not use if the hook is visibly distorted, damaged or worn V V V Keep body and other objects clear of the latch when closing to avoid the pinch point Do not side load or tip load hook User should be properly trained and understand safe rigging practices For more information, visit us at www.cmworks.com CHAI N & R I GGI NG ATTACHMEN TS (C MR P -6) W WW. C M W O R K S . CO M PHONE: 800.888.0985 71