Valco Melton Gluing & Quality Assurance Systems Core Winding Glue Systems for Spiral Wound Tubes ® Sales/Ordering Guide Table of Contents Introduction.....................................................................................................................1 CORE WINDING BRACKET OPTIONS Core Winder Bracket .......................................................................................................3 VALVE & APPLICATOR OPTIONS 369 Valve, 4-inch .............................................................................................................7 369 Valve, 8-inch .............................................................................................................7 Low Pressure Valve Support Equipment ..........................................................................8 Low Pressure Valve Components.....................................................................................9 08HP Valve ....................................................................................................................11 High Pressure Valve Components ..................................................................................12 CONTROL OPTIONS MCP-4 Control ...............................................................................................................13 FLUID HANDLING SYSTEM Pumping System Options...............................................................................................15 SYSTEM STANDS Bottom-Up & Top-Down Configurations..........................................................................21 WEB TENSIONER/WEB SCRAPER OPTIONS Web Tensioner...............................................................................................................27 Web Scraper .................................................................................................................27 WEB OILER OPTION Web Oiler ......................................................................................................................32 WEB BREAK DETECTION OPTION Web Break Detection .....................................................................................................34 HETADE HOSE OPTION Heated Hose..................................................................................................................35 SAMPLE SYSTEMS 4-inc Web, Top-Down Gluing, Low-Pressure, Sample System .........................................36 8-inch Web, Bottom-Up Gluing, High-Pressure, Sample System......................................37 SPECIALS Specials ........................................................................................................................38 Valco Melton VALCO MELTON • 411 Circle Freeway Dr • Cincinnati • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 [email protected] • www.valcomelton.com © Valco Cincinnati, Inc. All Rights Reserved. This information is provided specifically for Valco Cincinnati employees, representatives, and agents. No part of this catalog may be reproduced or transmitted, in any form or by any means, without the prior written permission of Valco Cincinnati, Inc. Written and designed at Valco Cincinnati, Inc., 411 Circle Freeway Drive, Cincinnati, OH 45246. Core Winding Glue Systems for Spiral Wound Fiber Tubes Core Winding Glue System Valco Melton Core Winding System Mandrel Core Winding Machine Tension accumulator Unwind stand The core winding system delivers a completely enclosed application solution for manufacturing spiral-wound cores. The system offers easy installation and is designed to produce a higher quality product, reduce glue usage, eliminate glue slinging and minimize cleanup. Core Winder Selection Guide Components needed to build a core winder system: Typical system options Core winder bracket MCP-4 control Fluid handling system Heated Hose Glue valve w/ head System stand Web break sensor Valve support equipment Web tensioner Web oiler © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 1 Core Winding Glue Systems for Spiral Wound Fiber Tubes Typical system layout © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 2 Core Winding Bracket Options Core Winder Bracket 582xx822 583xx003 SMT4512 • Actuator lifts applicator from paper web as soon as machine stops. • Micro-adjustment vertical, horizontal and angle for proper head contact. • Even coating at all machine speeds Core Winder Bracket PN DESCRIPTION 583xx003 Standard core winder base bracket. 4 inch wide paper max. 582xx822 Core winder bracket w/ bottom slides (old style). Slides allow the bracket to float with the paper. 4 inch wide paper max. Glides on low friction linear bearings to follow “walking” paper. Spring-loaded-to-center bracket dampens sudden forces and re-aligns to center. SMT4512 Heavy duty 8 inch core winder bracket 8 inch wide paper max. Note: 8 in. core winder bracket will not mount to standard system stands, larger stands required. © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 3 Core Winding Bracket Options 583xx003 © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 4 Core Winding Bracket Options 582xx822 © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 5 Core Winding Bracket Options REED SWITCH ASSEMBLY 24.0 [610 mm] REED SWITCH PROVIDED WITH ITEM # 22 .75 [19.1 mm] .18 [4.6 mm] PIN 3 = BLACK WIRE PIN 4 = RED WIRE EXPLODED VIEW ADJUSTMENT SECTION SMT4512 © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 6 Valve & Applicator Options 369 Series Valve & Applicator Low pressure application 369 valve 100 psi fluid pressure max. Core Winder Valve and Applicator Head, 369 valve, 4-inch PN DESCRIPTION SMT4615 369 valve w/ head, 4-inch max paper width 708xx780 4-inch replacement head, hardened 440C Stainless 4-in. blank pattern shims. Shims to be cut at application. Stainless steel 708xx549 Pattern shim - .004 thk. 708xx548 Pattern shim - .006 thk. 708xx739 Pattern shim - .008 thk. 708xx611 Pattern shim - .010 thk. standard Core Winder Valve and Applicator Head, 369 valve, 8-inch PN DESCRIPTION SMT4516 Dual 369 valve w/ head 8- inch max paper width SMT3517 8-inch replacement head, hardened 440C Stainless 8-inch blank pattern shims. Shims to be cut at application. Stainless steel 709xx742 Pattern shim - .004 thk. 708xx746 Pattern shim - .006 thk. 709xx740 Pattern shim - .008 thk. 708xx745 Pattern shim - .010 thk. standard © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 7 Valve & Applicator Options Low Pressure Valve Support Equipment Low pressure valve support equipment required with low pressure 369 valve only. Low Pressure Valve Support Equipment PN DESCRIPTION 782xx072 369 valve support equipment w/ 832 fluid regulator 782xx105 369 valve support equipment w/ proportional regulator Support equipment for the high pressure 08HP valve is included with the high pressure pumping system. © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 8 Low Pressure Valve Components Low Pressure Valve Components - 4-inch ITEM PN DESCRIPTION 1 706xx177 Screw,Stem Assy 2 706xx100 Diaphragm 3 706xx101 Diaphragm Protector 4 706xx175 Stem Top 5 745xx098 O'Ring 6 706xx176 Stem Bottom 7 745xx066 O'ring 8 706xx102 Spring 9 411xx792 Mac Valve 10 797xx725 Half Union,6mm Tube X 1/8m-UNI 11 753xx364 Manifold, Air 12 798xx180 SHCS - M3 X 30mm, SS 13 706xx206 Mounting stud 14 798xx362 Nut,Hex, M8, Ss 15 798xx360 Lockwasher, S.S., 8mm 16 703xx944 Valve body 17 SMT4495 Manifold-slot Coater 18 793xx470 Washer, Copper 19 792xx135 Adapter; 1/8NPT X 1/8BSPP-SS 20 784XX409 SHCS M5 X 25 SS 21 708XX780 Assy-blade seT,4.0 pattern 22 745xx104 O'Ring 24 798xx194 SHCS - M5 X 14MM, S.S. 25 797xx005 Street elbow-90 F-M 1/8 X 1/8 26 750xx001 Swivel FTG. - female 27 708XX611 Shim, 0.010 thick, Stainless 28 030xx773 Cable assy, M12 29 075xx302 Ferrule;INS,22AWG,8MM © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 9 Low Pressure Valve Components Low Pressure Valve Components - 8-inch © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 10 Valve & Applicator Options 08HP Series Valve & Applicator High pressure application 08HP valve, for pressures in excess of 100 psi Core Winder Valve and Applicator Head, 08HP valve, 4-inch PN DESCRIPTION 708xx782 O8HP valve w/ head 4 in. wide paper max. 708xx780 4-inch replacement head, hardened 440C stainless 4-in. blank pattern shims. Shims to be cut at application. Stainless steel 708xx549 Pattern shim - .004 thk. 708xx548 Pattern shim - .006 thk. 708xx739 Pattern shim - .008 thk. 708xx611 Pattern shim - .010 thk. © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 11 High Pressure Valve Components High Pressure Valve Components - 4-inch ITEM 1 PN 703xx907 DESCRIPTION 08HP vaslve assembly 3 792xx136 1/8 BSPP x 9-16-18 JIC 4 709xx519 Manifold, block nozzle 5 708xx780 Assembly, blade set 6 794xx877 Clamp 7 798xx152 SHCS, M6 x 12 SS 8 784xx442 SHCS M8 x 20 SS 9 784xx097 Flat washer, M8 10 798xx360 Lockwasher, 8mm, SS 11 745xx104 O-ring 12 784xx409 SHCS M5 x 25 SS 14 798xx194 SHCS M5 x 14 SS 15 750xx001 Swivel fitting, female 16 750xx009 Male swivel 17 411xx118 3-way valve assembly, 24V 18 799xx542 1/8 NPT x 5/16 tube © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 12 Control Options MCP-4 Control The MCP-4 control is used with the core winder system (except for new OEM machines). Control System Components PN DESCRIPTION 074xx038 MCP-4 Control 155xx341 Encoder kit. Includes VDD-1000 encoder, bracket arm and measuring wheel Encoder cable option (used with Valco system stands)s: 030xx632 Encoder cable, 8m 030xx630 Encoder cable, 2m Switch box option: The switch box is used to raise & lower the head for gluing. The switch box is not needed if the machine already has a switch left over from the old glue pot. 098xx089 Switch box For systems with existing switch box use a 030xx555, 8 meter scanner cable to wire existing switch (used as the web break input). © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 13 Control Options MCP-4 connections Valve Cables PN DESCRIPTION 030xx623 Valve cable 1 meter lg. (top down gluing) 030xx624 Valve cable 2 meter lg. (bottom up gluing) Note: Valve cables 2 required - 3 if web tensioner is used Scanner Cables (1 required) PN DESCRIPTION 030xx592 Scanner cable 1 meter lg. (top down glueing) 030xx593 Scanner cable 2 meter lg. (bottom up gluing) © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 14 Fluid Handling System Fluid Handling System Some plants have their own pumping system. In this case the fluid handling system is not needed. Pumping System Options PN DESCRIPTION 561xx175 Fluid handling system, low pressure, 100 psi max. Includes DD-1 pump, hoses, cables and bracket 579xx393 Fluid handling system, high pressure, over 100 psi. Includes EPP6 pump, 3:1 regulator, hoses, cables and bracket Optional Low Level Detection PN 738xx001 DESCRIPTION Low level detection/alarm package © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 15 Fluid Handling System 561xx175 © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 16 Fluid Handling System 579xx393 © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 17 Fluid Handling System 738xx001 © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 18 Fluid Handling System Typical system with EPP6 pump © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 19 Fluid Handling System Typical system with DD-1 pump © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 20 System Stands System stands System stands feature mounting for all Valco system components, including applicator assembly, control, encoder, web sensor, fluid regulator and pump. Bottom-Up And Top-Down Configurations PAPER WRAP FOR BOTTOM UP GLUING PAPER WRAP FOR TOP DOWN GLUING Top down gluing Bottom up gluing MA N EL DR MA ND L RE Bottom up gluing is used when the web wraps around the mandrel from the bottom side. (Example: Perini machine) Top down gluing is used when the web wraps around the mandrel from the top side (Example: PCMC & Ronco Machines) © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 21 System Stands 582xx814 System Stand, Bottom-Up Gluing PN 582xx814 DESCRIPTION Bottom-up gluing system stand, 4-inch paper width See typical system illustrations, pages 25 and 26. © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 22 System Stands PDM0145 System Stand, Bottom-Up Gluing PN PDM0145 DESCRIPTION Bottom-up gluing system stand, 8-inch paper width See typical system illustrations, pages 25 and 26. © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 23 System Stands 582xx582 System Stand, Top-Down Gluing PN 582xx852 DESCRIPTION Top-down gluing system stand See typical system illustrations, pages 25 and 26. © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 24 System Stands Typical system with DD-1 pump © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 25 System Stands Typical system with EPP6 pump © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 26 Web Tensioner/Web Scraper Options Web Tensioner/Web Scraper Options 582xx883 The web tensioner is used to apply tension to the web resulting in a tighter wound core. A tighter wound core promotes better bonding with the glue. Some machines/companies use their own tensioner. Web Tensioner Option PN DESCRIPTION 582xx883 Universal web tensioner (4-inch max web) Used with top down stand 582xx852 583xx002 Rear mounted tensioner (4-inch max web) Used with bottom up stand 582xx814 SMT4260 Large rear mounted tensioner (8-inch max web) Used with 8-inch bottom up stand PDM0145 The web scraper is used in European applications to force the glue into the fiber of the paper. Web Scraper Option PN 782xx189 DESCRIPTION Web scraper © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 27 Web Tensioner/Web Scraper Options 582xx883 © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 28 Web Tensioner/Web Scraper Options 583xx002 © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 29 Web Tensioner/Web Scraper Options SMT4260 © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 30 Web Tensioner/Web Scraper Options 782xx189 © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 31 Web Oiler Option Web Oiler SMT3782 The oiler is used to lubricate the web to prevent heat buildup and allow the paper to form smoothly around the mandrel during the core winding process. Web Oiler PN SMT3872 DESCRIPTION Web oiler © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 32 Web Oiler Option SMT3872 © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 33 Web Break Detection Option Web Break Detection Single web break detection Dual web break detection Web break detection is used to stop the glue valve in the case of a break in the paper. Single Web Break Detection QTY REQ'D PN DESCRIPTION 1 280xx283 Fixed field sensor 1 029xx362 Sensor adaptor cable 1 280xx248 "Y" scanner adapter 1 098xx089 Switch box 1 582xx810 Sensor bracket 1 030xx593 Scanner cable 2M Dual Web Break Detection QTY REQ'D PN DESCRIPTION 2 280xx283 Fixed field sensor 2 029xx362 Sensor adaptor cable 2 280xx248 "Y" scanner adapter 1 098xx089 Switch box 2 582xx810 Sensor bracket 1 030xx593 Scanner cable 2M © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 34 Heated Hose Option Heated Hose The heated hose is used to maintain consistent adhesive viscosity in colder temperature plants or to promote better bonding on higher speed machines. Heated Hose Option QTY REQ'D PN 1 780xx003 Heated hose 8ft lg 1 TAJ0144 Temperature control 2 792xx081 1/4 NPT x 9/16JIC SS fitting 1 797xx056 1/4 coupling 1 797xx049 1/2 x 1/4 bushing 1 703xx418 Shut-off valve DESCRIPTION © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 35 Sample Core Winding Systems Sample systems Sample System; 4-Inch Web, Top-Down Gluing, Low Pressure QTY REQ'D PN 1 583xx003 Core winder bracket 1 SMT4615 Valve/Head 2 708xx611 Blank shim 1 782xx072 Valve support equipment, 832 regulator 1 074xx038 MCP-4 control 1 155xx341 Encoder kit 1 030xx630 Encoder cable, 2M 1 098xx089 Switch box 3 030xx623 Valve cable, 1M (for glue valve, solenoid & web tensioner) 1 030xx592 Scanner cable, 1M (for rotary reed switch) 1 561xx175 Fluid handling system, DD-1 pump 1 582xx852 System stand, top down 1 582xx883 Web tensioner, universal 1 MY030 DESCRIPTION Manual © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 36 Sample Core Winding Systems Sample System; 8-Inch Web, Bottom-Up Gluing, High Pressure QTY REQ'D PN 1 SMT4512 Core winder bracket 1 SMT3517 Valve/Head 2 708xx745 Blank shim 074xx038 MCP-4 control 1 155xx341 Encoder kit 1 030xx630 Encoder cable, 2M 1 098xx089 Switch box 3 030xx623 Valve cable, 1M (for glue valve, solenoid & web tensioner) 1 030xx592 Scanner cable, 1M (for rotary reed switch) 1 579xx393 Fluid handling, high pressure 1 PDM0145 System stand, Bottom-up 1 SMT4260 Web tensioner,8-inch 1 MY030 DESCRIPTION Manual © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 37 Core Winding System Specials When the standard core winder assemblies are not practical for the application, specialty assemblies can be designed. Below is a list of previous designed specialty core winders for reference. Note: Contact Engineered Products Group for quoting Valves PN DESCRIPTION 708xx784 369 valve w/ 1.0" pattern head. Used for older single-ply systems and some O.E.M. machines - replaced by 708xx781 708xx781 Old-style valve, replaced by SMT4615 Web Tensioner PN SMT4452 DESCRIPTION Web tensioner, dual web, side-by-side, Used with SMT4488 bracket and SMT4451 stand © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 38 Core Winding System Specials Note: Contact Engineered Products Group for quoting Brackets PN DESCRIPTION SMT4531 Special application, 4-inch core winder heavy duty upgrade. Used in high tension applications. Replaces top section on standard core winder bracket SMT4198 Special application, includes metal rollers and mounting for load cell SMT4488 Special application, Dual web side-by-side, 3-ply machines SMT4521 Special application, vertical with web guide, multi-ply machines © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 39 Core Winding System Specials Note: Contact Engineered Products Group for quoting Stands PN DESCRIPTION SMT4073 Special application, Dual vertical application with Fife guides, 8-inch web SMT4451 Special application, Bottom-up system stand for dual web side-by-side core winder SMT4488 © Valco Cincinnati, Inc. • 411 Circle Freeway Drive • Cincinnati • Ohio • 45246 • USA Tel: 513.874.6550 • Fax: 513.874.3612 • [email protected] • www.valcomelton.com 40