CADWorx Plant Sanitary Specification and Data File Setup Instructions: 1. CADWorx Plant Sanitary specification and data files will be located in a folder under the main CADWorx install folder. (Note: Default will be C:\CADWorx Plant\Sanitary). 2. From the CADWorx Plant menu inside AutoCAD, run SETUP command. This will bring up the "CADWorx Plant Setup" dialog. 3. In the "CADWorx Plant Setup" dialog, click the "Edit Config File..." button. The will bring up the "Configuration File" dialog. 4. Select "SpecificationDirectory" in the list box and set the path to "..\Sanitary\Spec" directory. (Note: Default will be C:\CADWorx Plant\Sanitary\Spec) 5. Select "LibraryDirectory" in the list box and set the path to "..\Sanitary" directory. (Note: Default will be C:\CADWorx Plant\Sanitary) 6. Use CADWorx SpecView to draw the components. --------------------------------------------------------------------- Note: A CADWorx Plant Professional license or a CADWorx Sanitary module license is required to use these files.