Ficha tecnica PGFC22 (1)

PGFC22
60Hz POWERED BY POWERGEN
TECHNICAL SPECIFICATIONS
DIESEL GENERATING SET 220/127V-60Hz-3Phase
Model
PGFC22
Power(ESP)
kVA/kw
28/22
Power(PRP)
kVA/kw
25/20
Starter Voltage
V
12
Rated Current
A
73
r/min
1800
Rated rotation speed
0.8
Power Factor
Fuel Consumption
g/KWh
240
Fuel Tank Capacity
L
88 ; 121
dB(A)@7m
≤ 68
Dimension ( L*W*H )
Weight
Noise level
WEIGHT AND DIMENSIONS
GEN-Set
Open Type
1320mm×700mm×1160mm
521Kg
Silent Type
1856mm×826mm×1415mm
766 Kg
STANDARDS:
Genset: GB/T2820—2009,ISO8528
CONFIGURATION:
Alternator: CEDEX, CX18
Standard: Engine, alternator, cooling system, Base frame (excluding
Diesel Engine: FAWDE , 4DW91-38D
fuel tank), shock absorber, air inlet system, control box (including mains
Standby Power: Continues running at variable load for duration of an
floating charge), plastic fan blades (when the engine and water tank do not
emergency. No overload is permitted on these ratings.
bring). Optional: Base frame (including fuel tank), water jacket heater,
Prime Power: Continues running at variable load for unlimited periods
fuel water separator, fuel heater, fuel level sensor (only supporting
with 10% overload available for 1 hour in any 12 hour period.
underframe tank), switch box (with switch), power switch, the water
level sensor, motor anti condensation heater, automatic fueling system
(only supporting base frame including fuel tank), battery frame.
Accessories: Silencer, bellow, exhaust silencing system accessories (with the
matching engine), regular battery, starting cord assembly, data of genset,random tool
ENGINE Specification
Manufacturer： FAWDE
Model
Engine speed Rated
Cylinder /Arrangement
Displacement
Bore and Stroke
4DW91-38D
1800 RPM
4/ L
2.54 L
90 mm×100 mm
Compression ratio
17 ：1
Max. stand by power at rated RPM
31 KW
Frequency regulation , steady state
Governor : type
Aspiration and Cooling
≤5%
Mechanical / Electronic
Naturally aspirated, water cool
Exhaust System
Exhaust gas flow
Exhaust temperature
Energy to exhaust
6.6m³/min
560℃
28.6KW
Fuel System
Fuel consumption100% (of the Prime Power)
240g/KWh
Fuel consumption75% (of the Prime Power)
Fuel consumption50% (of the Prime Power)
Fuel consumption25% (of the Prime Power)
Oil system
Total oil capacity w/filters
8L
 FAWDE engines with optimized design, easy maintenance, big power
density, with stable performance, reliable and durable.
 Low fuel consumption and emission, lower noise and smooth running.
 Parts commonality, seriation of engine application.
 Compact structure, easy maintenance.
Note: All data sheets are for reference only
and subject to change without prior notice.
ALTERNATOR Specification
Manufacturer： CEDEX
Type
Number of phase power
Factor (Cos Phi)
CX18
3
0.8
Pole
4
Bearing
1
Coupling
Direct
Exciter type
Brushless SHUNT
lnsulation : class , temperature rise
H/H
Degree of protection
IP23
Altitude
≤1000m
Winding Pitch
2/3
Winding Leads
6/12
FEATURES
 Class H insulation system
 selectable winding,To meet the demand of the bad
environment
 12 Lead Reconnect, able for different voltage, meet the
demand of different countries and regions
 2/3 pitch windings restrain the content of harmonious
 Different Excitation Systems for different load demand
 Ip23 standard protection,IP44 for option
 Provide single bearing or double bearing
STANDARDS
-IEC60034,NEMA MG1-32,ISO8528,CSA
C22.2-100,VDE 0530,GB755
Note: All data sheets are for reference only and subject to
change without prior notice.
Control Panel
Model: AMF 20
AUTOMATIC MAINS FAILURE CONTROLLER
InteliLite® controllers are equipped witha powerful graphic display.
Icons,symbols and bar graphs for intuitiveoperation together with
high functionalityset new standards in gen-set control.
Special low temperature (IL-AMF 20-LTor IL-AMF 25-LT) version is
alsoavailable, allowing the display to workup to -300C.
KEY FEATURES


Support of engines equippedwith Electronic Control Unit
- Over-/under voltage
(J1939interface)
- Voltage asymmetry
Comprehensive diagnostic messages;SPN/FMI codes;

Configurable analog inputs
KWP2000 support

Battery voltage, engine speed(pick-up) measurement

Automatic or manual start/stop of thegen-set

Configurable programmable binaryinputs and outputs

Push buttons for simple control, lamptest

Warm-up and cooling functions

Graphic back-lit LCD display128x64 pixels

Generator C.B. and Mains C.B.control with feedback and

6 LED indicators

Parameters adjustable via keyboardor PC

Mains measurements (50/60 Hz):U1-U3, Hz

Generator measurements (50/60 Hz):U1-U3, I1-I3, Hz, kW,

Modem communication support(IL-AMF 25 only)
kVAr, kWh

Dimensions 180x120 mm (front panel)

Selectable protections alarm/shutdown

Sealed to IP65

3 phase Generator protections
returntimer

IL-AMF 20)
KEY BENEFITS
- Over-/under voltage

RS232 interface (AT-LINK CONVcable is necessary for
- Over-/under frequency

Less wiring and components
- Current/voltage asymmetry

Integrated solution
- Overcurrent/overload

Less engineering and programming
3 phase AMF function

Perfect price/performance ratio
- Over-/under frequency