Subido por zhishanglihe

Twin screw extruder

Anuncio
Zhoushan Changjia Plastic machinery Co.,Ltd.
WPC Parallel Twin Screws
Material:W6Mo5Cr4V2、38CrMoAlAandPowder alloy composites
Use:Masterbatch, modified, extruder, granulator equipment
Processing range:Ф20mm - Ф300mm
Service: In the case of PE parts defibrillators does not
exceed 30% of the normal operation of 4000 hours
Mandrel is an important element to ensure the smooth operation
of the extruder, so we will make several tests each combination
of bits in order to ensure to achieve tolerances. Years of
experience in processing so that we can supply to 6 m long
mandrel. 40CrNiMo mandrel made of material at high speed, high
torque, high load, in particular good toughness and mechanical
properties, in the process strictly controlled precision to
ensure the mandrel groove depth, groove from standard
surface smooth, tough and durable. Also based on customer
requirements, providing customers with high wear resistance,
high corrosion resistance of powder high-speed steel and other
specialty steel products. In terms of product categories, the
company in addition to supply domestic manufacturers extruder
accessories, as well as German Werner £ Pfleiderer WP,
Leistritz Germany Rice, Berstorff Germany Berstorff, Toshiba
Toshiba, JSW Steel said in Japan, Kobe, Kobe, Japan, etc. the
company's machines offer standard accessories.
Φ55/Φ110Conical Twin Barrel Screws
Tempering hardness:HB260-290
Nitridation hardness:HV800-1050
Nitration case depth:0.4-0.7mm
Nitridation brittleness ≤ grade 1
Surface roughness:Ra0.4
Screw straightness:0.015mm
Chromium coating hardness after nitridation:≥900HV
Chromium coating thickness:0.05-0.10mm
Dual alloy hardness:HRC56-65
Dual alloy hardness:0.8-2.0mm
Material and technology
Quality 38CrMoAIA
Quality duplex stainless steel
Quality power metallurgy material
Cold/hot spraying hard metal technology
Advanced nitriding technology
Corrosion resistance, wear-resisting dual alloy spraying
technology
Taper twin-screw, diplopore barrel series
SJS 35, SJS 51, SJS 55, SJS 65, SJS 80, SJS 92,
Screw diameter / screw amount
35/80-2, 51/105-2, 55/113-2, 65/132-2, 80/156-2, 92/188-2
Screw direction: anti-clockwiseoutward
Crew speed:
1-40,2-32,1-36,1-32,1-32,1-32
Screw effective length
810mm,1070,1200,1441,1800,2500mm
Complete set of Conical Twin Barrel Screws
Screw straightness:0.015mm
Tempering hardness:HB260-290
Nitride hardness:HV800-1050
Material:quality 38CrMoAIA, quality duplex stainless steel,
Quality power metallurgy material
Birthplace: Zhejiang Province, China (mainland)
Descargar