It is the perfect answer to the needs of the aluminum carpentry sector with a window multipurpose with modern design, a variety of additional services and maximum profitability and comfort • It consists of framed ships, which move smoothly, silently and without movements laterals on an angled guide extending the contact surface with the bearing. • The alternatives of the trainers, makes this system to be used correctly in different sizes and heights in buildings. • The chair has an inclination of 10 degrees to evaluate the evacuation of liquids. (Standard in sliding systems of the Universal line). • The horizontals of the frame are equipped to assemble other guides, which serve to add anchors • This design has the possibility of using punches, machinery and equipment used for rapid manufacturing of excellent presentation. • The maximum recommended height for this system is 1.7 m., According to the configurations of the table of pressures, resistances and sizes. See table, page 6. • The design of the profiles and their use are in accordance with the requirements of the standards Colombian for design and construction earthquake resistant NSR-98 (Title B-loads. Chapter B.6 wind forces, Table F.7.3.2 Limits Deflections, law 400/1977. THIS DESIGN CONTAINS: • Possibility of using crystals with thicknesses of 4, 5, 6 mm, monolithic or laminated. • Ships embedded in the top rail of the frame, which improve its resistance, insulation and tightness. • Sliding and removable anchoring, which moves with the Astral 1.6 window bearings, maximizing the use of the Astral series accessories. • Double seals in high density plush, between the top rail of the frame and ships and between the interlocking and the lower guides, located outwards to achieve better soundproofing, tightness and protection against wind and dust seepage. • Drilling guides for assembly in self-tapping. • Possible typologies: OX; XO; XOX 1/3; XOX 1/4; OXXO; OXX; XX; XXO; XXX • Typologies with the possibility of increasing fixed bodies and anti-condensation grilles for the control of the temperature and ventilation of domestic gas. • Possibility of reinforcing the entrecierres with additional profiles that maximize their characteristics technical and functional, depending on the location and height in the buildings. • Nylon deflector boxes, located on the outer guide of the lower rail to facilitate evacuation of liquids, even in case of negative pressures. • Possibility of using integrated sill in the ashlar according to the design specifications. TECHNICAL CHARACTERISTICS • Aluminum with 6063 alloy, T-5 temper. • Accessories in high density Nylon C6: deflector boxes, bumpers and bearing housings. • Self-tapping with drilling guides for hardware No. 8. • Glazing with "U" type EPDM gasket in various sizes depending on the thickness of the glass. • Bearings with housing and Nylon track, mounted on steel balls with angled track and monolithically vulcanized on a metal shaft, guaranteed for 10,000 operating cycles according to load limitations. (max. 30 kg. of weight per ship) • Automatic closing of pressure fitted in the vertical, with hammer and receiver in stainless steelGuaranteed for 10,000 beats. ACCESSORIES • Nylon housing bearing, mounted on stainless steel pellets or needles and with angled track • Press closure in aluminum with receiver and hammer in stainless steel. • 5x5 mm polypropylene fiber plush. • Deflector boxes and stops in Nylon C6. • “U” type packing in EPDM, for different thicknesses.
