WWW.FPPI.COM UL LISTED AND FM APPROVED LISTED VALVE NOW AVAILABLE IN 1½” SIZE • Brass Body* (C38000) for superior corrosion resistance • Listed valves available in the following sizes: 1 ½”**, 2”, 2 ½”, 3” and 4” • Available Grooved, Threaded, or Thread by Groove reducing the need for additional fittings and minimizing installation time. • Pressure rated to up to 300 PSI • Tapped and plugged for easy use of accessories such as ball drips or gauges *Contains lead. Not for use in water systems intended for human consumption. **1 1/2” size is UL/ULc listed only 3198 LIONSHEAD AVE CARLSBAD, CA 92010 + 1 (760) 599-1168 + 1 (800) 344-1822 + 1 (800) 344-3775 FAX TrimFit® Check Valves UL Listed and FM Approved Dimensions WIDTH LENGTH LENGTH SIZE # ITEM # SIZE ITEM (MM) LENGTH WIDTH CONFIGURATION (MM) (MM) 1 1/2” 1 1/2”* 09-574-00 09-574-00 176 176 MNPT X GRV 105 61 105 15/16 1/2” 1 1/2” 1 1/2”* 09-575-00 09-575-00 154 154 MNPT X FNPT 105 1 1/2” 1 1/2”* 09-576-00 09-576-00 176 1 1/2” 1 1/2”* 09-577-00 2” WIDTH LENGTH LENGTH WIDTH SIZE ITEM (MM) (IN) # (IN) (IN) WIDTH LENGTH (IN) (MM) WIDTH (MM) LENGTH (IN) WID (IN 64 15/16 09-574-00 1/8 4176 1/8 105 6 15/16 41 6 1 105 1/2” 1/16 64 1/8 1/16 09-575-00 4154 1/8 105 6 1/16 41 176 GRV105 X GRV 61 105 15/16 1/2” 6415/16 09-576-00 1/8 4176 1/8 105 6 15/16 41 09-577-00 150 150 FNPT105 X FNPT 5 1 105 1/2” 9/16 54 1/8 9/16 09-577-00 4150 1/8 105 5 9/16 41 2” 09-568-00 09-568-00 157 157 MNPT X GRV 105 6105 2” 1/4 1/4 09-568-00 461/8 4157 1/8 105 6 1/4 41 2” 2” 09-570-00 09-570-00 146 146 MNPT X FNPT 105 5105 2”3/4 3/4 09-570-00 45 1/8 4146 1/8 105 5 3/4 41 2” 2” 09-572-00 09-572-00 157 157 GRV105 X GRV 6105 2” 1/4 1/4 09-572-00 461/8 4157 1/8 105 6 1/4 41 2 1/2” 2 1/2” 09-562-00 09-562-00 176 176 MNPT X GRV 105 62 105 15/16 1/2” 6415/16 09-562-00 1/8 4176 1/8 105 6 15/16 41 2 1/2” 2 1/2” 09-564-00 09-564-00 159 159 MNPT X FNPT 105 26105 1/2” 1/4 1/4 09-564-00 46 1/8 4159 1/8 105 6 1/4 41 2 1/2” 2 1/2” 09-566-00 09-566-00 176 176 GRV105 X GRV 62 105 15/16 1/2” 6415/16 09-566-00 1/8 4176 1/8 105 6 15/16 41 3” 3” 09-556-00 09-556-00 173 173 MNPT X GRV 128 6 128 13/16 3” 6513/16 09-556-00 1/8 5173 1/8 128 6 13/16 51 3” 3” 09-558-00 09-558-00 167 167 MNPT X FNPT 128 6128 3”5/8 5/8 09-558-00 56 1/8 5167 1/8 128 6 5/8 51 3” 3” 09-560-00 09-560-00 173 173 GRV128 X GRV 6 128 13/16 3” 6513/16 09-560-00 1/8 5173 1/8 128 6 13/16 51 4” 4” 09-550-00 09-550-00 206 206 MNPT X GRV 142 8142 4”1/8 1/8 09-550-00 58 5/8 5206 5/8 142 8 1/8 5 5 4” 4” 09-552-00 09-552-00 202 202 MNPT X FNPT 142 142 4” 8 8 09-552-00 5 5/8 5202 5/8 142 8 5 5 4” 4” 09-554-00 09-554-00 202 202 GRV142 X GRV 142 4” 8 8 09-554-00 5 5/8 5202 5/8 142 8 5 5 *UL Listed Only 3198 LIONSHEAD AVE CARLSBAD, CA 92010 + 1 (760) 599-1168 + 1 (800) 344-1822 + 1 (800) 344-3775 FAX © 2016 Fire Protection Products, Inc. WWW.FPPI.COM The information contained herein is produced in good faith and is believed to be reliable but is provided for guidance and information purposes only. FPPI and its agents cannot assume liability or responsibility for results obtained in the use or misuse of its product by persons whose methods and qualifications are outside and beyond our control. It is the user’s responsibility to determine the suitability of, methods of use, preparation prior to use, and appropriate installation for all products purchased from FPPI. It is the user’s sole responsibility to observe and adapt such precautions as may be advisable or necessary for the protection of personnel and property in the handling and use of any of our products. TrimFit® Check Valves Installation Instructions Description Check valves feature cast brass* bodies with a spring loaded clapper assembly making this valve suitable for vertical or horizontal installations. Features metal faced clapper with O-ring seat. Rated to 300 psi. Valve bodies are tapped and plugged 1/2” IPS for additional equipment such as a ball drip valve when used in conjunction with a Fire Department Connection or a pressure gauge when used in a supply line. Installation Install in accordance with approved installation practices. Use an approved thread sealant such as PipeFit Thread Sealing Paste with PTFE on all threaded connections. Make sure that proper lubrication has been applied to groove coupling gaskets for groove end valves. DO NOT OVER TIGHTEN THREADED CONNECTIONS. OVERTIGHTENING MAY CAUSE DISTORTION OF THE BODY AND THREADS OF THE VALVE LEADING TO IMPROPER PERFORMANCE AND PRODUCT FAILURE. Specifications Material: Cast Brass* (C38000) Pressure Rated: 300psi Size: 11/2” IPS** 2” IPS 21/2” IPS 3” IPS 4” IPS Configurations: MNPT x GRV MNPT x FNPT GRV x GRV FNPT x FNPT 1 ½” only  *Contains lead. Not for use in water systems intended for human consumption. **1 ½” size is UL/ULc listed only The information contained herein is produced in good faith and is believed to be reliable but is provided for guidance and information purposes only. FPPI and its agents cannot assume liability or responsibility for results obtained in the use or misuse of its product by persons whose methods and qualifications are outside and beyond our control. It is the user’s responsibility to determine the suitability of, methods of use, preparation prior to use, and appropriate installation for all products purchased from FPPI. It is the user’s sole responsibility to observe and adapt such precautions as may be advisable or necessary for the protection of personnel and property in the handling and use of any of our products. 3198 LIONSHEAD AVE CARLSBAD, CA 92010 + 1 (760) 599-1168 + 1 (800) 344-1822 + 1 (800) 344-3775 FAX © 2016 Fire Protection Products, Inc. WWW.FPPI.COM
