References [1] S. Walck, J. Zabinski, N. McDevitt and J. Bultman, Characterization of air-annealed, pulsed laser deposited ZnO-WS2 solid film lubricants by transmission electron microscopy, Thin Solid Films, 305, 130, (1997). [2] M. Schenato, C. Azanza, P. Scardi, R. Edla, A. Miotello, M. Orlandi and R. Morrish, Effect of annealing and nanostructuring on pulsed laser deposited WS2 for HER catalysis, Appl. Catal. A, 510, 156, (2016). [3] S. Prasad, J. Zabinski and N. McDevitt, Friction behavior of pulsed laser deposited tungsten disulfide films, Tribol. Trans., 38, 57, (1995). [4] S. Alfihed, M. Hossain, A. Alharbi, A. Alyamani, and F. Alharbi, PLD Grown polycrystalline tungsten disulphide (WS2) Films, J. Mater. Sci., 2013, 1, (2013). [5] S. Prasad, J. Zabinski and V. Dyhouse, Pulsed-laser deposition of tungsten disulphide films on aluminium metal-matrix composite substrates, J. Mater. Sci. Lett., 11, 1282, (1992). [6] J. Yao, Z. Zheng, J. Shao and G. Yang, Stable, highly-responsive and broadband photodetection based on large-area multilayered WS2 films grown by pulsed-laser deposition, Nanoscale, 7, 14974, (2015). [7] J. Zabinski, M. Donley, S. Prasad and N. McDevitt, Synthesis and characterization of tungsten disulphide films grown by pulsed-laser deposition, J. Mater. Sci., 29, 4834, (1994). [8] S. Prasad and J. Zabinski, Tribology of tungsten disulphide (WS2): characterization of wearinduced transfer films, J. Mater. Sci. Lett., 12, 1413, (1993). [9] T. Loh and D. Chua, Origin of Hybrid 1T- and 2H-WS Ultrathin Layers by Pulsed Laser Deposition, J. Phys. Chem. C, 119, 27496, (2015). [10] W. Winer, Molybdenum disulfide as a lubricant: A review of the fundamental knowledge, J. Frict. Wear, 10, 421, (1967). [11] R. Dickinson and L. Pauling, The Crystal Structure of Molybdenite, J. Am. Chem. Soc., 45, 1466, (1923). [12] R. Deacon and J. Goodman, Lubrication by Lamellar Solids, Proc. R. Soc. Lond., 243, 464, (1958). [13] N. McDevitt, M. Donley and J. Zabinski, Utilization of Raman spectroscopy in tribochemistry studies, J. Frict. Wear, 166, 65, (1993). [14] Z. Yang and J. Hao, Progress in pulsed laser deposited two-dimensional layered materials for device applications, J. Mater. Chem. C, 4, 8859, (2016). [15] J. Zabinski, J. Florkey, S. Walk, J. Bultman and N. McDevitt, Friction properties of WS2/graphite fluoride thin films grown by pulsed laser deposition, Surf. Coat. Technol., 76, 400, (1995). [16] L. Jiao, Y. Wang, Y. Zhi, W. Cui, Z. Chen, X. Zhang, W. Jie and Z. Wu, Fabrication and Characterization of Two-Dimensional Layered MoS2 Thin Films by Pulsed Laser Deposition, Adv. Condens. Matter Phys., 2018, 1, (2018). [17] M. Donley, P. Murray, S. Barber and T. Haas, Deposition and Properties of MoS2 Thin Films Grown by Pulsed Laser Evaporation, Surf. Coat. Technol., 36, 329, (1988). [18] J. Greer and M. Tabat, Large‐area pulsed laser deposition: Techniques and applications, J. Vac. Sci. Technol. A, 13, 1175, (1995). [19] M. Serna, S. Yoo, S. Moreno, Y. Xi, J. Oviedo, H. Choi, H. Alshareef, M. Kim, M. Jolandan, and M. Quevedo, Large-Area Deposition of MoS2 by Pulsed Laser Deposition with In Situ Thickness Control, J. Am. Chem. Soc., 10, 6054, (2016). [20] T. Loh, D. Chua and A. Wee, One-step Synthesis of Few-layer WS2 by Pulsed Laser Deposition, Sci. Rep., 5, 18116, (2015). [21] S. Prasad, N. McDevitt, J. Zabinski, Tribology of tungsten disulfide films in humid environments: The role of a tailored metal-matrix composite substrate, J. Frict. Wear, 230, 24, (1999). [22] T. Loh, M. Tanemura and D. Chua, Ultrathin MoS2 and WS2 layers on silver nano-tips as electron emitters, Appl. Phys. Lett., 109, 133102 (2016). [23] Y. Lian, J. Deng, G. Yan, H. Cheng and J. Zhao, Preparation of tungsten disulfide (WS2) softcoated nano-textured self-lubricating tool and its cutting performance, Int. J. Adv. Manuf. Technol., 68, 2033, (2013). [24] T. Venkatesan, Pulsed laser deposition - invention or discovery, J. Phys. D: Appl. Phys., 47, 1, (2014). [25] M. Akhtar1, G. Anderson, R. Zhao, A. Alruqi, J. Mroczkowska, G. Sumanasekera and J. Jasinski, Recent advances in synthesis, properties, and applications of phosphorene, npj 2D Mater. Appl., 1, 1, (2017). [26] W. Choi, N. Choudhary, G. Han, J. Park, D. Akinwande and Y. Lee, Recent development of two-dimensional transition metal dichalcogenides and their applications, Mater. Today, 20, 116, (2017). [27] A. Soloviev, S. Grigoriev, D. Fominski, M. Volosova and R. Romanov, Structural and electrochemical properties of W-Se-O layers prepared by pulsed laser pre-deposition and thermal post- treatment, J. Phys. Conf. Ser., 747, 1, (2016). [28] R. Sahu, D. Radhakrishnan, B. Vishal, D. Negi, A. Sil, C. Narayana, R. Datta, Substrate induced tuning of compressive strain and phonon modes in large area MoS2 and WS2 van der Waals epitaxial thin films, J. Cryst. Growth, 470, 51, (2017). [29] S. Han, R. Bhatia and S. Kim, Synthesis, properties and potential applications of twodimensional transition metal dichalcogenides, Nano Convergence, 2, 1, (2015). [3] C. Tourney, Nat. Nanotechnol., 2016, 11, 2. [4] M. M. Waldrop, Nature, 2016, 530, 144. [5] S. E. Thompson and S. Parthasarathy, Mater. Today, 2006, 9, 20. [6] S. Ornes, Proc. Natl. Acad. Sci. U. S. A., 2015, 112, 13128. [7] K. S. Novoselov, A. K. Geim, S. Morozov, D. Jiang, Y. Zhang, S. V. Dubonos, I. V. Grigorieva and A. A. Firsov, Science, 2004, 306, 666. [8] K. Novoselov, A. Geim, S. Morozov, D. Jiang, M. Katsnelson, I. Grigorieva, S. Dubonos and A. Firsov, Nature, 2005, 438, 197. [9] D. Akinwande, P. Nicholas and H. James, Nat. Commun., 2014, 5, 5678. [10] Z. S. Butler, S. M. Hollen and L. Y. Cao, ACS Nano, 2013, 7, 2898. [11] A. K. Geim and K. S. Novoselov, Nat. Mater., 2007, 6, 183. [12] C. Lee, X. Wei, J. W. Kysar and J. Hone, Science, 2008, 321, 385. [13] D. Sun, G. Aivazian, A. M. Jones, J. S. Ross, W. Yao, D. Cobden and X. Xu, Nat. Nanotechnol., 2012, 7, 114. [14] Q. H. Wang, K. Kalantar-Zadeh, A. Kis, J. N. Coleman and M. S. Strano, Nat. Nanotechnol., 2012, 7, 699. [15] O. N. Weiss, H. Zhou, L. Liao, Y. Liu, S. Jiang, Y. Huan and X. Duan, Adv. Mater., 2012, 24, 5782. [16] B. Radisavljevic, A. Radenovic, J. Brivio, V. Giacometti and A. Kis, Nat. Nanotechnol., 2011, 6, 147. [17] P. Mir ́o, M. Audiffred and T. Heine, Chem. Soc. Rev., 2014, 43, 6537. [18] P. Avouris, Z. Chen and V. Perebeinos, Nat. Nanotechnol., 2007, 2, 605. [19] D. Xiao, G.-B. Liu, W. Feng, X. Xu and W. Yao, Phys. Rev. Lett., 2012, 108, 196802. [20] L. Britnell, R. V. Gorbachev, R. Jalil, B. D. Belle, F. Schedin, A. Mishchenko, T. Georgiou, M. I. Katsnelson, L. Eaves, S. V. Morozov, N. M. R. Peres, J. Leist, A. K. Geim, K. S. Novoselov and L. A. Ponomarenko, Science, 2012, 335, 947. [21] S. N. Grigoriev, V. Y. Fominski, R. I. Romanov, A. G. Gnedovets and M. A. Volosova, Appl. Surf. Sci., 2013, 282, 607. [22] T. A. J. Loh, D. H. C. Chua and A. T. S. Wee, Sci. Rep., 2015, 5, 18116. [23] T. A. J. Loh and D. H. C. Chua, J. Phys. Chem. C, 2015, 119, 27496. [24] M. Schenato, C. L. A. Ricardo, P. Scardi, R. Edla, A. Miotello, M. Orlandi and R. Morrish, Appl. Catal., A, 2016, 510, 156. [25] J. D. Yao, Z. Q. Zheng, J. M. Shao and G. W. Yang, Nanoscale, 2015, 7, 14974. [26] P. Yan, A. Liu, Y. Chen, H. Chen, S. Ruan, C. Guo, S. Chen, I. L. Li, H. Yang, J. Hu and G. Cao, Opt. Mater. Express, 2015, 5, 479. [27] B. Guo, Y. Yao, P. G. Yan, K. Xu, J.-J. Liu, S.-G. Wang and Y. Li, IEEE Photonics Technol. Lett., 2016, 28, 323. [28] Y.-H. Lee, L. Yu, H. Wang, W. Fang, X. Ling, Y. Shi, C.-T. Lin, J.-K. Huang, M.-T. Chang, C.-S. Chang, M. Dresselhaus, T. Palacios, L.-J. Li and J. Kong, Nano Lett., 2013, 13, 1852. [29] H. Zhang, S. B. Lu, J. Zheng, J. Du, S. C. Wen, D. Y. Tang and K. P. Loh, Opt. Express, 2014, 22, 7249. [30] S. Walck, J. Zabinski, N. McDevitt and J. Bultman, Characterization of air-annealed, pulsed laser deposited ZnO-WS2 solid film lubricants by transmission electron microscopy, Thin Solid Films, 305, 130, (1997). [31] M. Schenato, C. Azanza, P. Scardi, R. Edla, A. Miotello, M. Orlandi and R. Morrish, Effect of annealing and nanostructuring on pulsed laser deposited WS2 for HER catalysis, Appl. Catal. A, 510, 156, (2016). [32] S. Prasad, J. Zabinski and N. McDevitt, Friction behavior of pulsed laser deposited tungsten disulfide films, Tribol. Trans., 38, 57, (1995). [33] S. Alfihed, M. Hossain, A. Alharbi, A. Alyamani, and F. Alharbi, PLD Grown polycrystalline tungsten disulphide (WS2) Films, J. Mater. Sci., 2013, 1, (2013). [34] S. Prasad, J. Zabinski and V. Dyhouse, Pulsed-laser deposition of tungsten disulphide films on aluminium metal-matrix composite substrates, J. Mater. Sci. Lett., 11, 1282, (1992). [35] J. Yao, Z. Zheng, J. Shao and G. Yang, Stable, highly-responsive and broadband photodetection based on large-area multilayered WS2 films grown by pulsed-laser deposition, Nanoscale, 7, 14974, (2015). [36] J. Zabinski, M. Donley, S. Prasad and N. McDevitt, Synthesis and characterization of tungsten disulphide films grown by pulsed-laser deposition, J. Mater. Sci., 29, 4834, (1994). [37] S. Prasad and J. Zabinski, Tribology of tungsten disulphide (WS2): characterization of wearinduced transfer films, J. Mater. Sci. Lett., 12, 1413, (1993). [38] T. Loh and D. Chua, Origin of Hybrid 1T- and 2H-WS Ultrathin Layers by Pulsed Laser Deposition, J. Phys. Chem. C, 119, 27496, (2015). [39] W. Winer, Molybdenum disulfide as a lubricant: A review of the fundamental knowledge, J. Frict. Wear, 10, 421, (1967). [40] R. Dickinson and L. Pauling, The Crystal Structure of Molybdenite, J. Am. Chem. Soc., 45, 1466, (1923). [41] R. Deacon and J. Goodman, Lubrication by Lamellar Solids, Proc. R. Soc. Lond., 243, 464, (1958). [42] N. McDevitt, M. Donley and J. Zabinski, Utilization of Raman spectroscopy in tribochemistry studies, J. Frict. Wear, 166, 65, (1993). [43] Z. Yang and J. Hao, Progress in pulsed laser deposited two-dimensional layered materials for device applications, J. Mater. Chem. C, 4, 8859, (2016). [44] J. Zabinski, J. Florkey, S. Walk, J. Bultman and N. McDevitt, Friction properties of WS2/graphite fluoride thin films grown by pulsed laser deposition, Surf. Coat. Technol., 76, 400, (1995). [45] L. Jiao, Y. Wang, Y. Zhi, W. Cui, Z. Chen, X. Zhang, W. Jie and Z. Wu, Fabrication and Characterization of Two-Dimensional Layered MoS2 Thin Films by Pulsed Laser Deposition, Adv. Condens. Matter Phys., 2018, 1, (2018). [46] M. Donley, P. Murray, S. Barber and T. Haas, Deposition and Properties of MoS2 Thin Films Grown by Pulsed Laser Evaporation, Surf. Coat. Technol., 36, 329, (1988). [47] J. Greer and M. Tabat, Large‐area pulsed laser deposition: Techniques and applications, J. Vac. Sci. Technol. A, 13, 1175, (1995). [48] M. Serna, S. Yoo, S. Moreno, Y. Xi, J. Oviedo, H. Choi, H. Alshareef, M. Kim, M. Jolandan, and M. Quevedo, Large-Area Deposition of MoS2 by Pulsed Laser Deposition with In Situ Thickness Control, J. Am. Chem. Soc., 10, 6054, (2016). [49] T. Loh, D. Chua and A. Wee, One-step Synthesis of Few-layer WS2 by Pulsed Laser Deposition, Sci. Rep., 5, 18116, (2015). [50] S. Prasad, N. McDevitt, J. Zabinski, Tribology of tungsten disulfide films in humid environments: The role of a tailored metal-matrix composite substrate, J. Frict. Wear, 230, 24, (1999). [51] T. Loh, M. Tanemura and D. Chua, Ultrathin MoS2 and WS2 layers on silver nano-tips as electron emitters, Appl. Phys. Lett., 109, 133102 (2016). [52] Y. Lian, J. Deng, G. Yan, H. Cheng and J. Zhao, Preparation of tungsten disulfide (WS2) softcoated nano-textured self-lubricating tool and its cutting performance, Int. J. Adv. Manuf. Technol., 68, 2033, (2013). [53] T. Venkatesan, Pulsed laser deposition - invention or discovery, J. Phys. D: Appl. Phys., 47, 1, (2014). [54] M. Akhtar1, G. Anderson, R. Zhao, A. Alruqi, J. Mroczkowska, G. Sumanasekera and J. Jasinski, Recent advances in synthesis, properties, and applications of phosphorene, npj 2D Mater. Appl., 1, 1, (2017). [55] W. Choi, N. Choudhary, G. Han, J. Park, D. Akinwande and Y. Lee, Recent development of two-dimensional transition metal dichalcogenides and their applications, Mater. Today, 20, 116, (2017). [56] A. Soloviev, S. Grigoriev, D. Fominski, M. Volosova and R. Romanov, Structural and electrochemical properties of W-Se-O layers prepared by pulsed laser pre-deposition and thermal post- treatment, J. Phys. Conf. Ser., 747, 1, (2016). [57] R. Sahu, D. Radhakrishnan, B. Vishal, D. Negi, A. Sil, C. Narayana, R. Datta, Substrate induced tuning of compressive strain and phonon modes in large area MoS2 and WS2 van der Waals epitaxial thin films, J. Cryst. Growth, 470, 51, (2017). [58] S. Han, R. Bhatia and S. Kim, Synthesis, properties and potential applications of twodimensional transition metal dichalcogenides, Nano Convergence, 2, 1, (2015).