Form No. 101403 ® Parts List for: SPX Corporation 5885 11th Street Rockford, IL 61109-3699 USA Tech. Services: (800) 477-8326 Fax: (800) 765-8326 Order Entry: (800) 541-1418 Fax: (800) 288-7031 61869 64662 64663 P157 P157-LUAM P157E Internet Address: http://www.powerteam.com P157N P157V P159 P159-AW P159-GRC P159-LANCO P159-PARKER P159-PFAFF P159E P159N P159V MODEL B TWO-STAGE HYDRAULIC HAND PUMP TWO-WAY VALVE 2 "A" "C" 1 3 GAUGE 4 "B" "C" PRESSURE "B" 8, 9 10 Assemble carry handle to reservoir ass'y by folding tab (as indicated) into handle clip slot (2 places) "A" 40°/60° 15 Knob on pump may not be the same style as shown. All replacement knobs will be this style. 14 11 31 5 6 7 12 13 15 16 17 18 NING 30 29 28 27 24 25 26 23 22 20 21 19 16 300 PSI UNLOADING VALVE 1000 & 1400 PSI UNLOADING VALVE WARNING To help prevent personal injury, all repairs MUST be peformed by a qualified person trained in the repair of hydraulic equipment. 33 34 18 32 © SPX Corporation Sheet No. 1 of 2 Rev. 2 Date: 13 Sept. 1996 Parts List, Form No. 101403, Back sheet 1 of 2 Item No. 1 2 3 4 5 6 7 8 9 Part No. No. Req'd 251564 4 •†*215907 14972 215300 215301 211742 211743 351087 10556 2 1 1 1 2 4 1 2 Description Cap Screw (1/4-20 UNC x 3/4 Lg.) Decal (DO NOT REMOVE) Plug (1/4 NPTF) Decal (GAUGE) Decal (PRESSURE) Dowel Pin Retaining Ring (For 7/16" shaft) Knob Set Screw (Torque to 50/70 in. lbs.) 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 *305977 1 61806OR9 1 61806BL2 61806GY6 61806YE3 47417 1 1 1 1 58048 350923 58485WH2 *15092 †19321 •250841 *10271 †11445 •19406 *251603 †18985 •251604 251336 251514 251515 251377 251516 251517 *†•213987 64597 *214693 †19048 •214072 10427 *215075 21278 1 1 1 1 1 1 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Carry Handle Piston Clip Pump Body Cap (Iron) Rod Wiper Rod Wiper Rod Wiper O-ring (11/16 x 1/2 x 3/32) O-ring (11/16 x 1/2 x 3/32) O-ring (11/16 x 1/2 x 3/32) O-ring (2-1/8 X 2” X 1/16) O-ring (2-1/8 X 2” X 1/16) O-ring (2-1/8 X 2” X 1/16) Piston Ass’y (Nitrile) For P157 Series, Piston Ass’y (Viton) 64662 & Piston Ass’y (EPR) 64663 Piston Ass’y (Nitrile) For P159 Piston Ass’y (Viton) Series & 61869 Piston Ass’y (EPR) O-ring Backup Washer Pump Body O-ring (3-7/8 x 3-5/8 x 1/8) O-ring (3-7/8 x 3-5/8 x 1/8) O-ring (3-7/8 x 3-5/8 x 1/8) Plug (1/8 NPTF) Filter Plug High Pressure Relief Valve } } High Pressure Relief Valve High Pressure Relief Valve (Set at 8,700/9,300 PSI; For 64662) 21278-105 1 No. Req'd 25 308478 1 Trade Name Decal (For P157, 308468 1 Trade Name Decal (For P159, 26 27 211547 58041 1 1 Tie Rod Reservoir 28 58046 52711 1 1 Reservoir (For P157-LUAM) Reservoir Cap 29 10204 1 Hex Nut (3/8-16 UNC; Torque to 30 31 *212739 †250731 •250732 211769 1 1 1 1 Fill Cap Gasket Fill Cap Gasket Fill Cap Gasket Handle Grip (For all except P159- 32 206731 308486 1 1 Handle Grip (For 61871 & 61872) Adapter (For P157, P157-LUAM, Description P157E, P157N & P157V) P159E, P159N & P159V) (For all except P157-LUAM) (Torque to 50/60 in. lbs.) 150/170 in. lbs.) (For all except P159-PFAFF) Handle (For P157, P159-PARKER, P159, P159-LANCO & P159-GRC) Handle (For 61869) Handle (For P159-PFAFF) Handle (For P157-LUAM) Handle Assembly (For 64662, 64663 & P159-AW) (Set at 7,600/8,200 PSI; For 61869) 21278-86 Part No. Warning Decal (Set at 10,100/10,700 PSI; P157, P159, P159-AW, P159-GRC, P159-LANCO, P159-PFAFF, 64663) 21278-75 Item No. High Pressure Relief Valve (Set at 10,600/11,100 PSI; For P157-LUAM) AW, 64663 & 64662) P157E, P157N, P157V, 64662 & 64663) 33 34 *†19137 1 O-ring Backup Washer *10913 1 •14287 1 (2" x 1-13/16 x 3/64; For P157, P157-LUAM, P157E, P157N, P157V, 64662 & 64663) O-ring (2" x 1-13/16 x 3/32; For P157, P157-LUAM, P157N, 64662 & 64663) O-ring (For P157E) PARTS INCLUDED BUT NOT SHOWN 10029 4 Cap Screw (5/16-18 UNC x 3/4 Lg.; For 64662 & 64663) 10474 36890 16277 1 1 1 Fitting (For 64662) Hose Assembly (For 64662) Trade Name Decal †205724 •250328 251943 1 1 1 Decal (Viton seals) Decal (EPR seals) Decal (For P159-PFAFF) (For P159-GRC) Part numbers marked with an asterisk (*) are contained in Standard Repair Kit No. 300689. Part numbers marked with a dagger (†) are contained in Viton Seal Kit No. 300690. Part numbers marked with a bullet (•) are contained in EPR Seal Kit No. 300691. Parts List Form No. 101403 SECTION VIEWS 3 5 4 6 4 3 5 1 2 5 6 7 8 8 8 SECTION C-C 9 10 SECTION A-A 1000 & 1400 PSI UNLOADING VALVE 11 22 21 12 23 20 13 Adjust to 1,300/1,500 PSI unloading pressure (900/1,100 PSI for P157-Brick-EPR) 17 16 SECTION B-B 300 PSI UNLOADING VALVE 11 19 12 14 15 23 13 18 17 16 SECTION B-B 15 14 Sheet No. 2 of 2 Rev. 2 Date: 13 Sept. 1996 Parts List, Form No. 101403, Back sheet 2 of 2 Item No. Part No. No. Req'd 3 4 5 6 7 8 9 10 *†•15085 *10267 †18974 •13472 305975 *14874 *10444 *10378 *211797 *10375 350185 15528 1 1 1 1 2 2 3 2 1 3 1 1 O-ring Backup Washer (7/16 x 5/16 x 3/64) O-ring (7/16 x 5/16 x 1/16) O-ring O-ring Valve Screw (Torque to 350/370 in. lbs.) Copper Washer (.700 x 1/2 x 1/32 thk.) Compression Spring (3/16 I.D. x 13/32 Lg.) Steel Ball (3/8 Dia.) Compression Spring (5/32 O.D. x 5/8 Lg.) Steel Ball (1/4 dia.) Release Valve Screw Nylon Ball (Note: Push in nylon ball until it bottoms out 11 12 14588 252275 1 1 Dowel Pin Unloading Valve Piston Kit (Includes #252273 13 14 18 11127 *10265 †11437 •17714 *†•15174 214692 *12557 †18973 •215375 308430 1 1 1 1 1 1 1 1 1 1 Plug (3/8 NPTF) O-ring (5/16 x 3/16 x 3/64) O-ring O-ring O-ring Backup Washer (5/16 x 3/16 x 3/64) Unloading Valve Washer O-ring (11/32 x 7/32 x 1/16) O-ring O-ring Spring Retainer (For P159, P159-AW, P159-GRC, P159-LANCO, 19 214694 1 Compression Spring (For P159, P159-AW, P159-GRC, P159- 1 2 Description in hole. Permissible to flatten ball during installation.) retaining ring [Item # 23] and unloading valve piston) 15 16 17 P159-PARKER, P159-PFAFF & P159E) 20 305912 1 21 308488 1 22 214808 1 23 252273 1 LANCO, P159-PARKER, P159-PFAFF, P159E, P159V, P159N, 61869) Valve Adjusting Screw (For P157, P157-LUAM, P157E, P157N, P157V, 64662 & 64663) Spring Retainer (For P157, P157-LUAM, P157E, P157N, P157V, 64662 & 64663) Compression Spring (15/32 O.D. x 4-7/16 Lg.; For P157, P157-LUAM, P157E, P157N, P157V, 64662 & 64663) Retaining Ring (Included in Item #12) Part numbers marked with an asterisk (*) are contained in Standard Repair Kit No. 300689. Part numbers marked with a dagger (†) are contained in Viton Seal Kit No. 300690. Part numbers marked with a bullet (•) are contained in EPR Seal Kit No. 300691. Refer to any operating instructions included with this product for detailed information about operation, testing, disassembly, reassembly, and preventive maintenance. Items found in this parts list have been carefully tested and selected. Therefore: Use only genuine Power Team replacement parts! Additional questions can be directed to our Technical Services Department. Note: Shaded areas reflect last revision(s) made to this form.