action grip® basketball system

MODEL N° 90176
CO
PY
OWNER’S MANUAL
Keep this Product ID Number and use when contacting Customer Service:
1
REGISTER YOUR PRODUCT ONLINE AT WWW.LIFETIME.COM
At Lifetime, we are committed to providing innovative and quality products. While registering, you will
have the opportunity to give us your feedback. Your input is valuable to us.
t:PVDBOBMTPPQUJOUPSFDFJWFOFXQSPEVDUOPUJmDBUJPOTPSQSPNPUJPOT
t*OUIFVOMJLFMZFWFOUPGBQSPEVDUSFDBMMPSTBGFUZNPEJmDBUJPOZPVSSFHJTUSBUJPOQSPWJEFTUIF
JOGPSNBUJPOXFOFFEUPOPUJGZZPVEJSFDUMZ
t3FHJTUSBUJPOJTGBTUFBTZBOEDPNQMFUFMZWPMVOUBSZ
Lifetime’s Promise to You:
Maintaining your privacy is our long-standing policy at Lifetime. And you can rest assured that
-JGFUJNFXJMMOPUTFMMPSQSPWJEFZPVSQFSTPOBMEBUBUPPUIFSUIJSEQBSUJFTPSBMMPXUIFNUPVTFZPVS
QFSTPOBMEBUBGPSUIFJSPXOQVSQPTFT
8FJOWJUFZPVUPSFBEPVSQSJWBDZQPMJDZBUXXXMJGFUJNFDPN
REGISTER today!
PY
Save this owner’s manual for future reference and in the event that
the manufacturer has to be contacted.
**U.S. and Canada customers ONLY**
CO
IF ASSISTANCE IS NEEDED,
DO NOT CONTACT THE STORE!
CALL OUR CUSTOMER SERVICE DEPARTMENT at
1 (800) 225-3865
HOURS: 7:00 a.m. to 5:00 p.m. Monday through Friday (Mountain Standard Time)
**Call us or visit our Web site for Saturday hours**
Lifetime Products, Inc.
10#PYt'SFFQPSU$FOUFS#MEH%$MFBSGJFME6UBI
**For customers outside the U.S. or Canada, please contact the store for assistance.**
INSTRUCTION #1079708 K
2
8/30/2012
SAFETY INSTRUCTIONS
'"*-63&50'0--085)&4&8"3/*/(4.":3&46-5*/4&3*064*/+63:031301&35:
%"."(&"/%8*--70*%8"33"/5:
5PFOTVSFTBGFUZEPOPUBUUFNQUUPBTTFNCMFUIJTQSPEVDUXJUIPVUSFBEJOHBOE
GPMMPXJOHBMMJOTUSVDUJPOTDBSFGVMMZ$IFDLUIFFOUJSFCPYBOEJOTJEFBMMQBDLJOH
materials for parts and/or additional instruction material. Before beginning assembly,
JEFOUJGZBOEJOWFOUPSZBMMQBSUTBOEIBSEXBSFVTJOHUIFQBSUTBOEIBSEXBSFMJTUTBOE
JEFOUJmFSTJOUIJTEPDVNFOU Proper and complete assembly, use and supervision
BSFFTTFOUJBMGPSQSPQFSPSJFOUBUJPOBOEUPSFEVDFUIFSJTLPGBDDJEFOUPSJOKVSZ"
IJHIQSPCBCJMJUZPGTFSJPVTJOKVSZFYJTUTJGUIJTQSPEVDUJTOPUJOTUBMMFENBJOUBJOFE
BOEPSPQFSBUFEQSPQFSMZ'BJMVSFUPDPNQMZXJUIBOZPGUIFXBSOJOHTJOUIJT
JOTUSVDUJPONBOVBMNBZSFTVMUJOTFSJPVTQFSTPOBMJOKVSJFTTVDIBTDVUTCSPLFO
CPOFTOFSWFEBNBHFQBSBMZTJTCSBJOJOKVSZPSEFBUI'BJMVSFUPDPNQMZNBZBMTP
SFTVMUJOQSPQFSUZEBNBHF1MFBTFIFFEBMMXBSOJOHTBOEDBVUJPOT
t*GVTJOHBMBEEFSEVSJOHBTTFNCMZVTFFYUSFNFDBVUJPO
t5XPDBQBCMFBEVMUTBSFSFDPNNFOEFEGPSUIJTPQFSBUJPO
t$IFDLCBTFEBJMZGPSMFBLBHF-FBLTNBZDBVTFQSPEVDUUPGBMM
t"TTFNCMFUIFQPMFTFDUJPOTQSPQFSMZ'BJMVSFUPEPTPDPVMEDBVTFUIFQPMF
sections to separate during play or transport.
Most injuries are caused by misuse and/or not following instructions. Use caution when using this product.
BEFORE BEGINNING ASSEMBLY
,FFQUIFIBSEXBSFCBHTBOEUIFJSDPOUFOUTTFQBSBUF*GBOZQBSUT
are missing, call our Customer Service Department.
*EFOUJGZBOEJOWFOUPSZBMMQBSUTBOEIBSEXBSFVTJOHUIFQBSUTBOE
IBSEXBSFMJTUTBOEJEFOUJmFSTJOUIJTEPDVNFOU
5FTUmUBMM#PMUTCZJOTFSUJOHUIFNJOUPUIFJSSFTQFDUJWFIPMFT*G
OFDFTTBSZDBSFGVMMZTDSBQFBXBZBOZFYDFTTQPXEFSDPBUJOH
CVJMEVQGSPNJOTJEFUIFIPMFT%POPUTDSBQFBXBZBMMPGUIF
QPXEFSDPBUJOH#BSFNFUBMNBZSVTU:PVNBZOFFEUPQPVOE
TPNF#PMUTJOUPQMBDFXJUIBIBNNFSPSNBMMFU
3
TOOLS AND PARTS REQUIRED FOR THIS ASSEMBLY
1/2” Wrench
7/16” Wrench
(2)
(2)
(2)
w8SFODI
Pliers
Phillips Screwdriver
(1)
(1)
(2)
Electric Drill
Adjustable Wrench
9/16” Wrench
Rubber Mallet
(1)
(1)
(1)
'VOOFM
Sand
Scrap Wood
(1)
Water Hose
(1)
(1)
(375 lb)
3/16” Allen Wrench
(2, included)
*Two adults required to
complete assembly*
Only adults should set up the product. Do not allow children
in the setup area until assembly is complete.
ASSEMBLY GUIDES
Refer to the following areas throughout the instructions
to assist in the assembly process:
This area is located at the top,
left-hand corner of the page
and indicates which tools
and hardware are needed to
complete the assembly steps
on a page.
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
This area is usually located in the
bottom, left-hand corner of a step
and indicates that special attention
is needed to perform a particular
part of a step.
!
These areas are usually located in
the bottom, right-hand corner of a
step and indicate that damage to
the product or serious injury may
occur if the caution or warning is
not heeded.
Note:
CAUTION
8"3/*/(
5
PARTS LIST
ID
ALH
ALF
ALE
AJK
AJJ
AJI
AJX
AJQ
ALX
AKZ
ALD
ALL
AKC
AKB
AKQ
ALB
AJS
AKI
AMN
"+:
AJM
ALI
AMU
AJD
AJN
ALM
AKP
AMT
Item Description
Top Pole
Middle Pole
Bottom Pole
3JHIU#BDLCPBSE#SBDLFU
-FGU#BDLCPBSE#SBDLFU
#BDLCPBSE
Corner Frame Guard
Center Frame Guard
Rim
Net
Plastic Guard
1PMF#SBDLFU
4IPSU&YUFOTJPO"SN
-POH&YUFOTJPO"SN
Inner Channel
Outer Tube
Channel Stop
Handle
Trigger
Spring
Base
Pole Brace
Wheel
wYw"YMF
Base Cap
Pole Cap
)FJHIU4UJDLFS
8BSOJOH4UJDLFS"QQMJFEUP.JEEMF1PMF
Qty
1
1
1
1
1
1
2
1
1
1
1
1
2
2
1
1
1
1
1
2
1
2
2
1
1
1
1
1
HARDWARE LIST
ID
Item Description
BCO
Pole Assembly Hardware
Qty
ADS
ABZ
AAF
ABB
ABE
ABR
CIH
wYw4DSFX
Yw4FMG5BQQJOH4DSFX
3/8” Washer
w$FOUFSMPDL/VU
wYw)FY#PMU
wYw4QBDFS
%PNFE$PVOUFSTJOL8BTIFS
BCQ
Pole to Base Assembly Hardware
BTS
AAE
AAO
w#BSSFM/VU
wYw)FY#PMU
w/ZMPDL/VU
2
2
2
2
2
2
2
1
2
2
6
HARDWARE LIST
ID
Item Description
BCQ
Pole to Base Assembly Hardware, Continued
Qty
BZP
ABD
CCL
wYw4IPVMEFS#PMU
5/16” Washer
3/16” Allen Wrench
BCS
Backboard & Rim Assembly Hardware
AAS
ABS
ABC
ACS
AAB
AAJ
ABD
ABF
ABG
BNP
ABK
AJW
AOW
AAV
wYw)FY#PMU
wYw(BMWBOJ[FE4QBDFS
wYw$BSSJBHF#PMU
wYw4UFFM4QBDFS
w$FOUFSMPDL/VU
w)FY5/VU
5/16” Washer
7/16” Rubber Washer
wYw5BQ#PMU
w6#PMU
w/ZMPDL'MBOHF/VU
Compression Spring
Spring Retainer Plate
5/16” Jam Nut
BCR
Backboard to Pole Assembly Hardware
AAD
ABL
AAX
ABN
wYw)FY#PMU
wYw#MBDL4QBDFS
w$FOUFSMPDL/VU
wYw4QBDFS
BCT
Handle Assembly Hardware
APS
AEA
ADR
AQI
"$:
AAC
AAN
AAD
AAX
ABO
AAZ
ABB
-PDL5BC
#6 Washer
Yw1IJMMJQT4DSFX
Trigger Spring
wYw4DSFX
wYw)FY#PMU
5/16” Cap Nut
wYw)FY#PMU
w$FOUFSMPDL/VU
wYw1PMZ4QBDFS
wYw)FY#PMU
w$FOUFSMPDL/VU
BCU
Frame Guard Assembly Hardware
ADP
Yw4FMG%SJMMJOH4DSFX
1
2
2
2
2
2
2
2
2
2
2
1
6
2
1
2
1
2
2
1
2
1
1
1
1
2
1
1
7
10
PARTS IDENTIFIER
Parts shown at 10% of Actual Size
43 3/8 ”
ALHY
Top Pole
Warning Sticker
43 3/8 ”
"-'Y
Middle Pole
ALEY
27 5/8 ”
ALIY
Pole Brace
Bottom Pole
38”
"+%Y
"+,Y
21 3/4 ”
3JHIU#BDLCPBSE#SBDLFU
wYw"YMF
"++Y
AKCY
-FGU#BDLCPBSE#SBDLFU
4IPSU&YUFOTJPO"SN
21 1/8”
30 1/16 ”
AKBY
-POH&YUFOTJPO"SN
"+9Y
AKQY
Corner Frame Guard
Inner Channel
ALBY
Outer Tube
"+2Y
Center Frame Guard
8
PARTS IDENTIFIER
Parts shown at 10% of Actual Size
"-9Y
Rim
AKZY
Net
Parts shown at 5% of Actual Size
"+*Y
#BDLCPBSE
"+.Y
Base
9
PARTS IDENTIFIER
Parts shown at 25% of Actual Size
ALLY
"+4Y
"+/Y
Channel Stop
Base Cap
1PMF#SBDLFU
"+:Y
ALMY
Spring
Pole Cap
AMNY
Trigger
AMUY
Wheel
AKIY
Handle
AKPY
)FJHIU4UJDLFS
10
ALDY
Plastic Guard
HARDWARE IDENTIFIER
POLE ASSEMBLY HARDWARE [BCO]
Hardware shown at Actual Size
ABEY
wYw)FY#PMU
ABRY
wYw4QBDFS
ABBY
w$FOUFSMPDL/VU
ABZY
CIHY
Yw4FMG5BQQJOH
4DSFX
Domed CounterTJOL8BTIFS
""'Y
ADSY
3/8” Washer
wYw4DSFX
POLE TO BASE ASSEMBLY HARDWARE [BCQ]
Hardware shown at Actual Size
AAOY
BZPY
w/ZMPDL/VU
wYw4IPVMEFS#PMU
AAEY
ABDY
wYw)FY#PMU
BTSY
5/16” Washer
w#BSSFM/VU
CCLY
w"MMFO8SFODI
BACKBOARD TO RIM ASSEMBLY HARDWARE [BCS]
Hardware shown at Actual Size
ABCY
AASY
wYw$BSSJBHF#PMU
wYw)FY#PMU
11
HARDWARE IDENTIFIER
BACKBOARD TO RIM ASSEMBLY HARDWARE (CONTINUED)
Hardware shown at Actual Size
AABY
"#(Y
w$FOUFSMPDL/VU
wYw5BQ#PMU
AAVY
5/16”Jam Nut
ACSY
ABSY
wYw4UFFM4QBDFS
wYw(BMWBOJ[FE4QBDFS
ABKY
""+Y
ABDY
"#'Y
w)FY5/VU
5/16” Washer
7/16” Rubber Washer
w/ZMPDL'MBOHF/VU
Hardware shown at 25% of Actual Size
BNPY
w6#PMU
AOWY
"+8Y
Spring Retainer Plate
Compression Spring
BACKBOARD TO POLE ASSEMBLY HARDWARE [BCR]
Hardware shown at Actual Size
7 1/16”
""9Y
1/2” CenterMPDL/VU
(Not actual length)
AADY
wYw)FY#PMU
ABLY
wYw#MBDL4QBDFS
12
ABNY
wYw4QBDFS
HARDWARE IDENTIFIER
HANDLE ASSEMBLY HARDWARE [BCT]
Hardware shown at Actual Size
ADRY
ACYY
Yw
Phillips
4DSFX
APSY
wYw4DSFX
-PDL5BC
AACY
AEAY
wYw)FY#PMU
#6 Washer
7”
ABOY
wYw1PMZ4QBDFS
(Not actual length)
AAZY
wYw)FY#PMU
7 1/16”
""9Y
w$FOUFSMPDL/VU
(Not actual length)
AADY
wYw)FY#PMU
AQIY
AANY
ABBY
5/16” Cap Nut
w$FOUFSMPDL/VU
Trigger Spring
'3".&(6"3%"44&.#-:)"3%8"3&<#$6>
Hardware shown at Actual Size
ADPY
Yw4FMG%SJMMJOH4DSFX
13
SEC
1
POLE ASSEMBLY
HARDWARE REQUIRED
Hardware shown at Actual Size
ABEY
wYw)FY#PMU
ABBY
ABRY
w$FOUFSMPDL/VU
wYw4QBDFS
ABZY
CIHY
ADSY
Yw4FMG5BQQJOH4DSFX
%PNFE$PVOUFSTJOL8BTIFS
wYw4DSFX
""'Y
3/8” Washer
SEC
1
POLE ASSEMBLY
PARTS REQUIRED
Parts shown at 10% of Actual Size
43 3/8 ”
ALHY
Top Pole
Warning Sticker
43 3/8 ”
"-'Y
Middle Pole
ALEY
27 5/8 ”
Bottom Pole
Part shown at 25% of Actual Size
ALLY
1PMF#SBDLFU
TOOLS REQUIRED
9/16” Wrench Y
Phillips Screwdriver
15
Electric Drill
Scrap Wood
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
/0500-43&26*3&%'035)*41"(&
ABEY
""'Y
ABRY
SEC
1.1
Insert the wYw)FY#PMUT"#&
XJUIUIFw8BTIFST""'
into the
.JEEMF1PMF"-'
BTTIPXO5IFOTMJEFUIFwYw4QBDFST"#3
onto
UIF)FY#PMUT
"-'
ABE
""'
ABR
Large Holes
Small Holes
Warning
Sticker
16
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
9/16"Y
ABBY
SEC
1.2
Place the Pole Bracket (ALL) onto the wYw)FY#PMUT"#&
, and attach
it to the .JEEMF1PMF"-'
XJUIUIFIBSEXBSFTIPXO
"-'
ABE
ALL
ABB
17
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
ADSY
CIHY
SEC
1.3
Align the hole in the Top Pole (ALH)XJUIUIFTMPUJOUIF.JEEMF1PMF"-'
and
slide the Top Pole over the Middle Pole. Insert a wYw4DSFX"%4
through the Domed Countersink Washer (CIH) and the small hole in the Top
1PMFBOEJOUPUIFTMPUJOUIF.JEEMF1PMFBTTIPXO
ALH
ALH
CIH
"-'
"-'
!
Note: The 1/4” x 3/4” Screw should be flush with the Pole, but
will spin freely once installed. Do not jam the Poles together
until instructed.
18
ADS
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
ADSY
CIHY
SEC
Align the hole in the .JEEMF1PMF"-'
XJUIUIFTMPUJOUIFBottom Pole (ALE) and
slide the Middle Pole over the Bottom Pole. Insert a wYw4DSFX"%4
through the Domed Countersink Washer (CIH) and the small hole in the Middle
1PMFBOEJOUPUIFTMPUJOUIF#PUUPN1PMFBTTIPXO
"-'
"-'
CIH
ALE
ALE
!
Note: The 1/4” x 3/4” Screw should be flush with the Pole, but
will spin freely once installed. Do not jam the Poles together
until instructed.
19
ADS
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
/0)"3%8"3&3&26*3&%'035)*41"(&
SEC
1.5
ATTENTION: THIS STEP CANNOT BE REVERSED!
*OPSEFSUPTFBUUIF1PMFTTUSJLFFBDIFOEPGUIF1PMFWFSZIBSEmWFUPTJY
UJNFTPOBQJFDFPGTDSBQXPPEPSDBSECPBSE5IJTNVTUCFEPOFFWFOJG
the Poles cover the slots before seating has occurred.
If the 5PQBOE.JEEMF1PMFT"-)"-'
do not completely cover the slots on the
.JEEMFBOE#PUUPN1PMFT"-'"-&
after seating, DO NOT COMPLETE ASSEMBLY.
Call our Customer Service Department.
ALH
"-'
8"3/*/(
ALE
!
The Poles must be seated together! Even if the Poles cover
the slots before seating, they must be struck on a hard
surface five to six times! Failure to seat the Poles correctly
could allow the Poles to separate during use, which could
lead to serious personal injuries or property damage.
Note: Do not hit your feet with the Pole sections,
as serious injury could occur.
20
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
ABZY
SEC
1.6
"GUFSUIF1PMFTIBWFCFFOTFBUFEJOTFSUUXPYw4FMG5BQQJOH4DSFXT
(ABZ)JOUPUIFCBDLPGUIF1PMFBTTIPXO
ALH
ABZ
"-'
ABZ
ALE
!
Note: Chuck the #14 x 1” Self-Tapping Screw (ABZ) directly into an
Electric Drill for easy installation, or use a 3/8” Hex Driver.
21
SEC
2
POLE TO BASE ASSEMBLY
HARDWARE REQUIRED
Hardware shown at Actual Size
AAEY
wYw)FY#PMU
AAOY
BTSY
w/ZMPDL/VU
w#BSSFM/VU
ABDY
5/16” Washer
BZPY
wYw4IPVMEFS#PMU
PARTS REQUIRED
Parts shown at 25% of Actual Size
Part shown at 5% of Actual Size
AMUY
Wheel
"+.Y
"+/Y
Base
Base Cap
Parts shown at 10% of Actual Size
"+%Y
ALIY
21 3/4 ”
wYw"YMF
Pole Brace
38”
TOOLS REQUIRED
1/2" WrenchY
Rubber Mallet
22
3/16” Allen Wrench Y
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
/0)"3%8"3&3&26*3&%'035)*41"(&
SEC
4DSFXUIF#BTF$BQ"+/
onto the #BTF"+.
BTTIPXO
2.1
3VCCFS(BTLFU
"+.
"+/
!
Note: Make sure the Rubber Gasket is inside the Base Cap.
SEC
Slide the wYw"YMF"+%
through one of the Wheels (AMU) and into
the #BTF"+.
BTTIPXO5IFOIBWFPOFBEVMUQPTJUJPOUIFBottom Pole (ALE)
XJUIJOUIF#BTFBTTIPXOwith the lip at the bottom of the pole facing outward.
*OTFSUUIFwYw"YMFUISPVHIUIF#PUUPN1PMFBOEJOUPUIFPUIFS
side of the Base and through the other Wheel.
2.2
ALE
"+.
AMU
!
"+/
AMU
"+%
Note: It may be necessary to use a Rubber
Mallet to tap the Axle into place.
23
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
1/2"Y
BZPY
3/16"Y
AAOY
ABDY
AAEY
SEC
2.3
BTSY
Attach the flattened end of the Pole Brace (ALI) to the #BTF"+.
XJUI
UIFIBSEXBSFTIPXO0OMZmOHFSUJHIUFOUIFIBSEXBSF
ALI
AAE
ABD
ABD
AAO
!
SEC
"+.
Note: Repeat this step to install the other Pole Brace to
the other side of the Base.
Attach the Pole Braces (ALI) to the Bottom Pole (ALE)XJUIUIFIBSEXBSF
TIPXOBOEUJHIUFOBMM1PMFUP#BTFBTTFNCMZIBSEXBSF
BTS
BZP
ALI
ALI
ALE
!
Note: Tip the system backward so the Pole rests on the ground. Do not stand
the system up until it is filled with either sand or water later in the assembly.
SEC
3
BACKBOARD TO RIM ASSEMBLY
HARDWARE REQUIRED
Hardware shown at Actual Size
AASY
ABCY
wYw)FY#PMU
wYw$BSSJBHF#PMU
AABY
ACSY
wYw4UFFM4QBDFS
ABDY
5/16” Washer
ABKY
w/ZMPDL'MBOHF/VU
w$FOUFSMPDL/VU
"#'Y
7/16” Rubber Washer
ABSY
""+Y
wYw(BMWBOJ[FE4QBDFS
w)FY5/VU
"#(Y
AAVY
wYw5BQ#PMU
5/16”Jam Nut
Hardware shown at 25% of Actual Size
BNPY
w6#PMU
AOWY
"+8Y
Spring Retainer Plate
Compression Spring
25
SEC
3
BACKBOARD TO RIM ASSEMBLY
PARTS REQUIRED
Parts shown at 10% of Actual Size
"-9Y
Rim
"++Y
-FGU#BDLCPBSE#SBDLFU
"+,Y
3JHIU#BDLCPBSE#SBDLFU
Part shown at 5% of Actual Size
Part shown at 25% of Actual Size
ALDY
Plastic Guard
"+*Y
#BDLCPBSE
TOOLS REQUIRED
Pliers
1/2” Wrench
26
7/16” WrenchY
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
7/16”Y
AASY
BNPY
ABSY
AABY
(Not to scale)
SEC
Slide the w6#PMU#/1
through the -FGUBOE3JHIU#BDLCPBSE#SBDLFUT"++
"+,
5IF6#PMUNVTUSFTUJOUIFOPUDIFTPGUIF#BDLCPBSE#SBDLFUT
BTTIPXO
3.1
"+,
"+,
"++
"++
BNP
SEC
3.2
Notch
BNP
$POOFDUUIF#BDLCPBSE#SBDLFUTUPHFUIFSVTJOHUXPwYw
Hex Bolts (AAS)UXPwYw(BMWBOJ[FE4QBDFST"#4
BOEUXPw
Centerlock Nuts (AAB).
AAS
ABS
AAB
AAB
!
Note: Tighten the hardware securely now.
27
AAS
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
1/2”
"#(Y
""+Y
SEC
3.3
"#'Y
ABDY
*OTFSUUXPwYw5BQ#PMUT"#(
XJUIUIF5/16” Washers (ABD) and the
w3VCCFS8BTIFST"#'
UISPVHIUIFCPUUPNIPMFTJOUIFCBDLPGUIFRim
"-9
BTTIPXOBOETFDVSFUIFIBSEXBSFXJUIUXPw)FY5/VUT""+
.
"-9
ABD "#'
"#(
""+
"-9
"#(
"#(
!
Note: Make sure that the 5/16” x 2 1/2” Tap Bolts are
positioned on the outside edge of the holes as shown.
"#'
"#'
Incorrect
!
Correct
Note: Do not overtighten the hardware so that the 7/16” Rubber
Washers bulge outward as shown.
28
""+
""+
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
1/2”
ACSY
SEC
AAVY
ABKY
Insert the w6#PMU#/1
through the upper part of the opening on the
CBDLTJEFPGUIF#BDLCPBSE"+*
BTTIPXO
BNP
"+*
SEC
3.5
Connect the 3JN"-9
and 1MBTUJD(VBSE"-%
to the #BDLCPBSE"+*
XJUIUIF
IBSEXBSFTIPXO5ISFBEUIFw+BN/VUT""7
BMMUIFXBZEPXOPOUIF
U-Bolt. 0OUIFVOEFSTJEFPGUIF#BDLCPBSEQMBDF.38” x 1” Steel Spacers
(ACS) onto the wYw5BQ#PMUT"#(
, and secure the 5/16” Nylock
'MBOHF/VUT"#,
onto the Tap Bolts.
"-9
ABK
ABK
ACS
AAV
AAV
"#(
Underside View
ALD
"+*
29
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
"+8Y
AOWY
1/2”
(Not to scale)
(Not to scale)
ABKY
SEC
3.6
Slide the $PNQSFTTJPO4QSJOHT"+8
onto the w6#PMU#/1
, and
place the Spring Retainer Plate (AOW) over the Compression Springs.
Tighten the w/ZMPDL'MBOHF/VUT"#,
until the 3JN"-9
does not
XPCCMFUPDPNQMFUFUIJTTUFQ
"-9
ABK
AOW
"+8
BNP
!
Note: DO NOT COMPLETELY TIGHTEN THE 5/16” NYLOCK FLANGE NUTS IN
THIS STEP! Only tighten the Nuts until the Rim (ALX) does not wobble.
Tightening the Nuts will adjust the Rim tension.
30
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
1/2”
ABCY
SEC
3.7
Slide a wYw$BSSJBHF#PMU"#$
into the crimped slot in each
#BDLCPBSE$IBOOFMBTTIPXO
ABC
SEC
3.8
ABC
#FOEUIF#BDLCPBSE#SBDLFUTPVUXBSECZIBOEBOEHFOUMZMJGUUIFNPWFS
the wYw$BSSJBHF#PMUT"#$
5IFOTFDVSFMZGBTUFOUIF#BDLCPBSE
#SBDLFUTUPUIF#BDLCPBSE$IBOOFMTXJUIUIFIBSEXBSFTIPXO
ABC
ABC
ABK
!
ABKY
ABK
Note: Tighten the 5/16” Nylock Flange Nuts (ABK) until they are flush with the ends of the Bolts.
31
SEC
BACKBOARD TO POLE ASSEMBLY
HARDWARE REQUIRED
Hardware shown at Actual Size
ABLY
wYw#MBDL4QBDFS
""9Y
ABNY
w$FOUFSMPDL/VU
wYw4QBDFS
7 1/16”
(Not actual length)
AADY
wYw)FY#PMU
PARTS REQUIRED
Parts shown at 10% of Actual Size
AKCY
21 1/8”
4IPSU&YUFOTJPO"SN
30 1/16 ”
AKBY
-POH&YUFOTJPO"SN
TOOLS REQUIRED
w8SFODIY
Rubber Mallet
32
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
7 1/16”
wY
AADY
(Not actual length)
ABLY
SEC
Secure the Short Extension Arms (AKC)UPUIF#BDLCPBSE#SBDLFUTJOUIF
MPDBUJPOTIPXOXJUIUIFIBSEXBSFJOEJDBUFE
AKC
AKC
""9
!
""9Y
ABL
ABL
Note: Tighten the 1/2” Centerlock Nut (AAX) until it is flush with the end of the Bolt.
33
AAD
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
7 1/16”
wY
AADY
(Not actual length)
ABLY
SEC
Secure the ends of the Long Extension Arms (AKB) that only have one
IPMFUPUIF#BDLCPBSE#SBDLFUTJOUIFMPDBUJPOTIPXOXJUIUIF
IBSEXBSFJOEJDBUFE
AKB
""9
!
""9Y
AKB
ABL
ABL
Note: Tighten the 1/2” Centerlock Nut (AAX) until it is flush with the end of the Bolt.
AAD
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
7 1/16”
wY
ABNY
AADY
(Not actual length)
""9Y
SEC
CAUTION: HAVE ONE ADULT HOLD THE BACKBOARD IN PLACE
UNTIL ASSEMBLY HAS BEEN COMPLETED!
-BZUIF#BDLCPBSEBOE3JNBTTFNCMZOFYUUPUIF1PMFBTTFNCMZ3FTUUIF
Rim on cardboard to prevent scratching. Then secure the Short and Long
Extension Arms (AKC & AKB) to the Top Pole (ALH)XJUIUIFIBSEXBSFTIPXO
AKC
AKC
AAD
""9
ABN
ABN
AAD
""9
ABN
ABN
AKB
AKB
ALH
!
Note: Tighten the 1/2” Centerlock Nuts (AAX) until they are flush with the ends of the Bolts.
35
SEC
5
HANDLE ASSEMBLY
HARDWARE REQUIRED
Hardware shown at Actual Size
ACYY
wYw4DSFX
APSY
-PDL5BC
AACY
wYw)FY#PMU
7”
ABOY
(Not actual length)
wYw1PMZ4QBDFS
AAZY
wYw)FY#PMU
7 1/8”
(Not actual length)
""9Y
w$FOUFSMPDL/VU
AADY
wYw)FY#PMU
ADRY
Yw1IJMMJQT
4DSFX
AEAY
#6 Washer
AQIY
Trigger Spring
36
AANY
ABBY
5/16” Cap Nut
w$FOUFSMPDL/VU
SEC
5
HANDLE ASSEMBLY
PARTS REQUIRED
Parts shown at 10% of Actual Size
AKQY
Inner Channel
ALBY
Outer Tube
Parts shown at 25% of Actual Size
"+:Y
ALMY
Spring
Pole Cap
"+4Y
Channel Stop
AMNY
Trigger
AKIY
Handle
AKPY
)FJHIU4UJDLFS
TOOLS REQUIRED
1/2” Wrench Y
w8SFODIY
37
9/16” Wrench Y
Phillips Screwdriver
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
ADRY
AEAY
AQIY
SEC
5.1
APSY
Attach the Lock Tab (APS) to the Trigger (AMN)XJUIUIFIBSEXBSFTIPXO
and slide the Trigger Spring (AQI)POUPUIF5SJHHFSJOUIFMPDBUJPOTIPXO
ADR
AEA
APS
AMN
AQI
SEC
5.2
Insert the Trigger Assembly into the Handle (AKI)BTTIPXO5IFLock Tab
(APS)XJMMmUJOUPUIFCPUUPNTMPUBTTIPXO
APS
AKI
38
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
ACYY
SEC
5.3
Attach the Handle Assembly to the Outer Tube (ALB)XJUIUIFIBSEXBSF
TIPXO5IFLock Tab (APS)XJMMmUJOUPUIFOPUDIPOUIF0VUFS5VCF
ACY
ACY
ALB
!
SEC
Notch
APS
Note: Make sure that the Inner Channel (AKQ)
has been removed from the Outer Tube before
performing this step.
Orient the Height Sticker (AKP)BTTIPXOBOEQMBDFJUXJUIJOUIFHSPPWFT
of the Inner Channel (AKQ)-JOFVQUIFCPUUPNFOEPGUIFTUJDLFSXJUIUIF
edge of the Inner Channel.
7.5’
AKP
AKQ
10’
!
Note: Wipe off any grease that may be on the Inner
Channel before attaching the Height Sticker.
39
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
/0500-403)"3%8"3&3&26*3&%'035)*41"(&
SEC
8IJMFTRVFF[JOHUIFTrigger (AMN), insert the notched end of the
Inner Channel (AKQ) into the Outer Tube (ALB)BTTIPXO4MJEFUIF*OOFS
$IBOOFMJOUPUIF0VUFS5VCFVOUJMUIFNBSLIBTCFFOSFBDIFE
5IFOSFMFBTFUIF5SJHHFSTPJUDMJDLTJOUPQMBDF
5.5
ALB
AMN
AKQ
ALB
10’
AKQ
SEC
Insert the $IBOOFM4UPQ"+4
into the top of the Outer Tube (ALB)BTTIPXO
5.6
"+4
ALB
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
1/2”Y
AACY
SEC
5.7
AANY
Attach the Inner Channel (AKQ) to the Pole Bracket (ALL)XJUIUIFIBSEXBSF
TIPXO
AKQ
AAC
AAN
ALL
8"3/*/(
Do not overtighten the Cap Nut. If the end of
UIF#PMUCSFBLTUISPVHIUIFQMBTUJDDBQDBMMPVS
$VTUPNFS4FSWJDF%FQBSUNFOU&YQPTFEUISFBET
POUIFFOEPGUIF#PMUNBZDBVTFTFSJPVTJOKVSJFT
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
7 1/8”
wY
AADY
(Not actual length)
""9Y
ABOY
SEC
5.8
Secure the Outer Tube (ALB) to the Long Extension Arms (AKB) XJUIUIF
IBSEXBSFTIPXO
AKB
AKB
AAD
""9
ABO
ABO
ALB
!
Note: Tighten the 1/2” Centerlock Nut (AAX) until it is flush with the end of the Bolt.
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
7”
9/16”Y
(Not actual length)
ABBY
AAZY
SEC
5.9
Insert the 3/8” x 7” Hex Bolt (AAZ) through the holes in the Short Extension
Arms (AKC)UIBUBSFDMPTFTUUPUIF1PMF4FDVSFUIFwYw)FY#PMUUP
UIF4IPSU&YUFOTJPO"SNTXJUIUIF3/8” Centerlock Nut (ABB).
ABB
AAZ
AKC
!
SEC
5.10
AKC
Note: Tighten the 3/8” Centerlock Nut until it is flush with the end of the Bolt.
Insert the Pole Cap (ALM) into the Top Pole (ALH)BTTIPXO
ALM
ALH
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
Wrench
/0)"3%8"3&3&26*3&%'035)*41"(&
SEC
)PPLPOFPGUIFFOETPGB4QSJOH"+:
into the #2 hole on the Left
#BDLCPBSE#SBDLFU"++
BTTIPXO
5.11
"+:
"++
!
2
Note: Repeat this step to hook the end of the other Spring
into the #2 hole in the Right Backboard Bracket (AJK).
SEC
Raise the Bacboard to the highest position. Use the closed end of a
Wrench to stretch the 4QSJOHT"+:
up and over the 3/8” x 7” Hex Bolt (AAZ).
5.12
AAZ
"+:
!
Note: Make sure all hardware has been securely tightened before moving to the next section.
SEC
6
'*/"-"44&.#-:
HARDWARE REQUIRED
Hardware shown at Actual Size
ADPY
Yw4FMG%SJMMJOH4DSFX
(Only eight of the 10 Screws will be used)
PARTS REQUIRED
Parts shown at 10% of Actual Size
"+2Y
Center Frame Guard
AKZY
"+9Y
Net
Corner Frame Guard
TOOLS REQUIRED
Sand
'VOOFM
(375 lb)
Water Hose
Electric Drill
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
ADPY
SEC
6.1
3FNPWFUIFQMBTUJDmMNGSPNUIF#BDLCPBSE"+*
, and attach the
$FOUFS'SBNF1BE"+2
UPUIF#BDLCPBSEJOUIFMPDBUJPOTIPXOXJUI
UIFIBSEXBSFJOEJDBUFE.BLFTVSFUIBUUIF$FOUFS'SBNF1BEJT
DFOUFSFEPOUIFNFUBMQJFDFPGUIF#BDLCPBSEBTTIPXO
"+2
ADP
ADP
"+*
ADP
ADP
SEC
6.2
Attach the $PSOFS'SBNF1BET"+9
to the #BDLCPBSE"+*
in the locations
TIPXOXJUIUIFIBSEXBSFJOEJDBUFE
"+9
ADP
"+9
"+*
ADP
"+9
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
/0)"3%8"3&3&26*3&%'035)*41"(&
(375 lb)
Two adults are required to complete assembly. To prevent serious injuries, the
Pole should be held down by one adult at all times while the Base is being filled.
SEC
6.3
015*0/"'*--*/(8*5)4"/%
(375 lb of sand required)
a. Fill the #BTF"+.
XJUITBOE
C 4DSFXUIF#BTF$BQ"+/
POUPUIFmMMIPMF
D 6TJOHUXPBEVMUTTUBOEUIF#BTFVQPOBTNPPUITVSGBDF
8"3/*/(
For safety reasons, we recommend that sand be used
instead of water to fill the Base. If a leak develops, water
could run out unnoticed, allowing the system to fall over,
resulting in serious personal injuries, or property damage.
If using Water, check the Base carefully for leaks. If a
leak is found, lay the system down on the ground and
call Customer Service. Do not use, stand up, or play on
a leaking system.
"+.
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
/0)"3%8"3&3&26*3&%'035)*41"(&
Two adults are required to complete assembly. To prevent serious injuries, the
Pole should be held down by one adult at all times while the Base is being filled.
SEC
6.3
015*0/#'*--*/(8*5)8"5&3
B "EEDPMEXBUFSVQUPUIFmMMIPMFMFBWJOHUXPJODIFTPGTQBDFBU
UIFUPQGPSFYQBOTJPO
C "EEPOFUBCMFTQPPOPGDIMPSJOFCMFBDIUPUIFXBUFSUPQSFWFOU
algae formation.
D 4DSFXUIF#BTF$BQ"+/
POUPUIFmMMIPMF
E 6TJOHUXPBEVMUTTUBOEUIF#BTF"+.
up on a smooth surface.
"+.
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
/0500-403)"3%8"3&3&26*3&%'035)*41"(&
SEC
Attach Net (AKZ) to the 3JN"-9
.
"-9
AKZ
!
Note: If a replacement Net is needed, please call our Customer Service Department.
Our Nets are shorter than average to reduce the risk of entanglement.
OPERATION OF HEIGHT ADJUSTMENT SYSTEM
5IFCBTLFUCBMMTZTUFNNBZCFBEKVTUFEGSPNGFFUUPGFFU
To Adjust the Height of the Hoop:
)PMEUIF)BOEMFUJHIUMZBOETRVFF[FUIF5SJHHFS3BJTFUIF)BOEMFUPMPXFSUIF
#BDLCPBSEPSMPXFSUIF)BOEMFUPSBJTFUIF#BDLCPBSE
MOVING THE SYSTEM
8"3/*/( The system must only be moved by people capable of
IBOEMJOHJUTXFJHIU$IJMESFOTIPVMEOPUCFBMMPXFEUPNPWFUIFTZTUFN
B "EKVTU UIF TZTUFN UP JUT MPXFTU QPTJUJPO 6TF DBVUJPO UP QSFWFOU UIF IFJHIU
NFDIBOJTNGSPNBEKVTUJOH
b. Stand in front of the system and pull on the Pole until the unit is balanced on
its Wheels.
D .PWFUIFTZTUFNUPUIFEFTJSFEMPDBUJPOBOEDBSFGVMMZTFUUIF#BTFEPXO
CAUTION: The system must only be moved on its Wheels. Sliding the
#BTFNBZEBNBHFUIF#BTFXIJDIDPVMESFTVMUJOMFBLBHFBOEUIF
system tipping over.
POLE CARE AND SYSTEM MAINTENANCE
5IFMJGFPGZPVSCBTLFUCBMMTZTUFNEFQFOETPONBOZWBSJBCMFT5IFDMJNBUFFYQPTVSF
UPDPSSPTJWFTTVDIBTTBMUQFTUJDJEFTPSIFSCJDJEFTBOEFYDFTTJWFVTFPSNJTVTFDBO
BMMDPOUSJCVUFUP1PMFGBJMVSFXIJDINBZDBVTFQSPQFSUZEBNBHFPSQFSTPOBMJOKVSZ
$IFDLZPVSCBTLFUCBMMTZTUFNGSFRVFOUMZGPSMPPTFIBSEXBSFFYDFTTJWFXFBSBOE
TJHOTPGDPSSPTJPO'PSTBGFUZSFBTPOTBOEUPQSPMPOHUIFMJGFPGZPVSCBTLFUCBMM
TZTUFNZPVNVTUUBLFUIFGPMMPXJOHQSFWFOUJWFNFBTVSFT
B $IFDLBMM/VUTBOE#PMUT*GBOZBSFMPPTFUJHIUFOUIFN
C $IFDLBMMQBSUTGPSFYDFTTJWFXFBSBOEUFBS*GOFDFTTBSZSFQMBDFBOZQBSUTUIBU
IBWFCFFOXPSOPSEBNBHFEUISPVHIVTBHF$IFDLUIF1PMF$BQGPSDSBDLTPS
UFBSTUIBUDPVMEMFUXBUFSJOUIF1PMF$POUBDUPVS$VTUPNFS4FSWJDF%FQBSUNFOU
for replacement parts.
D *OTQFDUUIF8BSOJOH4UJDLFSPOUIF1PMF*GJUJTSJQQFEGBEFEPSJMMFHJCMF
DBMMPVS$VTUPNFS4FSWJDF%FQBSUNFOUUPSFRVFTUBSFQMBDFNFOU4UJDLFS
E $IFDLBMM1PMFTFDUJPOTGPSWJTJCMFSVTUPSDIJQQFEPSDSBDLFEQBJOU*GFJUIFS
BSFQSFTFOUEPUIFGPMMPXJOH
1. Use an emery cloth to completely remove any rust or chipped paint.
$MFBOUIFBSFBXJUIBEBNQDMPUIBOEBMMPXJUUPESZ
"QQMZUXPDPBUTPGBSVTUQSFWFOUBUJWFIJHIHMPTTFOBNFMQBJOUUPUIF
BSFB"MMPXUIFQBJOUUPESZCFUXFFODPBUT
*'3645)"41&/&53"5&%5)306()5)&10-&"/:8)&3&3&1-"$&*5*..&%*"5&-:
50
NOTES
51
NOTES
52
NOTES
53
ENHANCE YOUR LIFETIME® PURCHASE BY ADDING
ACCESSORIES OR OTHER GREAT PRODUCTS:
To purchase accessories or other Lifetime Products, visit us at:
www.lifetime.com
Or call: 1-800-424-3865
WARNING
'"*-63&50'0--085)&4&8"3/*/(4.":3&46-5*/4&3*064*/+63:"/%03
1301&35:%"."(&
0XOFSTNVTUFOTVSFUIBUBMMQMBZFSTLOPXBOEGPMMPXUIFTFSVMFTGPSTBGF
operation of the system.
t0OMZIBOHGSPNUIFSJNCSJFnZUPSFHBJOCBMBODFPSBWPJEJOKVSJOHPUIFST3FMFBTF
the rim as soon as safely possible.
t%VSJOHQMBZFTQFDJBMMZXIFOQFSGPSNJOHEVOLUZQFBDUJWJUJFTLFFQQMBZFSTGBDF
BXBZGSPNUIFCBDLCPBSESJNBOEOFU4FSJPVTJOKVSZDPVMEPDDVSJGUFFUIGBDF
DPNFJODPOUBDUXJUIUIFCBDLCPBSESJNPSOFU1MBZFSTIPVMEXFBSBNPVUI
guard during play.
t%POPUTMJEFDMJNCPSQMBZPOCBTFPSQPMF
t$PNQMFUFMZmMMCBTFBDDPSEJOHUPNBOVGBDUVSFSTJOTUSVDUJPOT/FWFSMFBWFUIF
VOJUTUBOEJOHJOBOVQSJHIUQPTJUJPOXJUIPVUmSTUmMMJOHUIFCBTFXJUIXFJHIUPS
UIFTZTUFNXJMMUJQRVJDLMZDBVTJOHTFSJPVTQFSTPOBMJOKVSZ
t8IFOBEKVTUJOHIFJHIUPSNPWJOHTZTUFNLFFQIBOETBOEmOHFSTBXBZGSPN
moving parts.
t%POPUBMMPXDIJMESFOUPNPWFPSBEKVTUTZTUFN
t%POPUXFBSKFXFMSZSJOHTXBUDIFTOFDLMBDFTFUD
EVSJOHQMBZ0CKFDUTNBZ
entangle in net.
t ,FFQ PSHBOJD NBUFSJBM BXBZ GSPN QPMF CBTF (SBTT MJUUFS FUD DPVME DBVTF
corrosion and/or deterioration.
t4VSGBDFCFOFBUIUIFCBTFNVTUCFTNPPUIBOEGSFFPGHSBWFMPSPUIFSPCKFDUT
1VODUVSFTDBVTFMFBLBHFBOEDPVMEDBVTFTZTUFNUPUJQPWFS
ADVERTENCIA
t0ODFBNPOUIDIFDLQPMFBOEBMMNFUBMQBSUTGPSTJHOTPGDPSSPTJPOSVTUQJUUJOH
DIJQQJOH
$PNQMFUFMZSFNPWFSVTUBOESFQBJOUXJUIFYUFSJPSFOBNFM*GSVTUIBT
penetrated any steel part, replace that part immediately.
t$IFDLTZTUFNCFGPSFFBDIVTFGPSQSPQFSCBMMBTUMPPTFIBSEXBSFFYDFTTJWF
XFBSJOTUBCJMJUZBOETJHOTPGDPSSPTJPOBOESFQBJSCFGPSFVTF
t/FWFSQMBZPOEBNBHFEFRVJQNFOU
t%POPUVTFTZTUFNEVSJOHXJOEZPSTFWFSFXFBUIFS4ZTUFNNBZUJQPWFS1MBDF
TZTUFNJOBOBSFBQSPUFDUFEGSPNUIFXJOEPSJOBOBSFBBXBZGSPNQSPQFSUZUIBU
NBZCFEBNBHFEJGUIFTZTUFNGBMMTBOEGSPNPWFSIFBEQPXFSMJOFT
t%POPUVTFUIFTZTUFNUPMJGUPSIPJTUBOZUIJOH5IFNFDIBOJTNJTEFTJHOFE
UPMJGUPOMZUIFXFJHIUPGUIFCBDLCPBSEBOESJN%POPUIBOHBOZUIJOHGSPN
UIFIBOEMFSJNCBDLCPBSEPSMJGUFSBSNTBTUIJTXJMMEBNBHFUIFTZTUFNBOE
WPJEUIFXBSSBOUZ
AVERTISSEMENT
4*/04&0#&%&$&/&45"4"%7&35&/$*"416&%&/130%6$*34&(3"7&4-&4*0/&4:0
DAÑOS A LA PROPIEDAD.
'"65&%&/&1"446*73&$&4"7&35*44&.&/5470643*426&;%&$"64&3%&4#-&4
463&4(3"7&4&506%&4%0.."(&4®-²26*1&.&/5
&MQSPQJFUBSJPEFMTJTUFNBEFCFBTFHVSBSTFEFRVFUPEPTMPTKVHBEPSFT
DPOP[DBOZSFTQFUFOFTUBTSFHMBTQBSBRVFFMTJTUFNBTFVTFFOGPSNB
segura.
-FQSPQSJÏUBJSFEPJUTBTTVSFSRVFUPVTMFTKPVFVSTDPOOBJTTFOUFUBQQMJRVFOU
MFTSÒHMFTTVJWBOUFTBmOEVUJMJTFSMÏRVJQFNFOUFOUPVUFTÏDVSJUÏ
tCuélguese del aro sólo en forma breve, para recuperar el equilibrio o evitar
MFTJPOBSBPUSPTKVHBEPSFT4VÏMUFTFEFMBSPMPNÈTQSPOUPRVFQVFEBIBDFSMP
con seguridad.
t%VSBOUFFMKVFHPFTQFDJBMNFOUFBMFNCPDBSWJPMFOUBNFOUFEFBMUPMBDBSB
EFMPTKVHBEPSFTEFCFNBOUFOFSTFBMFKBEBEFMUBCMFSPFMBSPZMBSFE1VFEFO
producirse lesiones graves si los dientes o la cara entran en contacto con el
UBCMFSPFMBSPPMBSFE-PTKVHBEPSFTEFCFOVTBSVOQSPUFDUPSCVDBMEVSBOUF
FMKVFHP
t/PTFEFTMJDFOPUSFQFOJKVFHVFTPCSFMBCBTFPFMQPTUF
t Llene la base completamente siguiendo las instrucciones del fabricante.
/VODBEFKFMBVOJEBEFOQPTJDJØOEFVTPTJOIBCFSMMFOBEPQSFWJBNFOUFMBCBTF
DPONBUFSJBMEFDPOUSBQFTPQVFTFMTJTUFNBQPESÓBUVNCBSTFSÈQJEBNFOUFZ
causar graves lesiones personales.
t.BOUFOHBMBTNBOPTZMPTEFEPTBMFKBEPTEFMBTQJF[BTNPWJCMFTDVBOEP
regule la altura o desplace el sistema.
t/PEFKFRVFMPTOJ×PTSFHVMFOOJEFTQMBDFOFMTJTUFNB
t/PVTFKPZBTBOJMMPTSFMPKFTDPMMBSFTPHBSHBOUJMMBTFUD
EVSBOUFFMKVFHP
&TUPTPCKFUPTQVFEFOFOHBODIBSTFFOMBSFE
t -B TVQFSmDJF EPOEF TF DPMPRVF MB CBTF EFCF FTUBS MJTB Z EFTQSPWJTUB EF
QJFESBTHSBWBVPUSPTPCKFUPT-BTQFSGPSBDJPOFTQVFEFOPSJHJOBSQÏSEJEBTZ
éstas pueden hacer que el sistema se tumbe.
t/PQFSNJUBRVFMBCBTFEFMQPTUFFOUSFFODPOUBDUPDPONBUFSJBMFTPSHÈOJDPT
El pasto, los desechos animales, etc., pueden causar corrosión y/o deterioros.
t$POUSPMFFMQPTUFZUPEBTMBTQJF[BTNFUÈMJDBTVOBWF[BMNFTFOCVTDBEF
TJHOPT WJTJCMFT EF DPSSPTJØO PYJEBDJØO QJDBEVSBT FTDBNBEP
&MJNJOF UPEP
SBTUSPEFØYJEPZWVFMWBBQJOUBSDPOFTNBMUFQBSBFYUFSJPSFT4JFMØYJEPIB
QFOFUSBEPDVBMRVJFSQJF[BEFBDFSPSFFNQMBDFFTBQJF[BEFJONFEJBUP
t *OTQFDDJPOF FM TJTUFNB BOUFT EF DBEB VTP QBSB WFSJmDBS RVF FTUÏ
BEFDVBEBNFOUFDPOUSBQFTBEPRVFMPTFMFNFOUPTEFmKBDJØOOPFTUÏOnPKPT
RVF OP IBZB EFTHBTUF FYDFTJWP JOFTUBCJMJEBE OJ TJHOPT EF DPSSPTJØO 4J
FODVFOUSBJSSFHVMBSJEBEFTSFQÈSFMBTBOUFTEFVTBSFMTJTUFNB
/VODBKVFHVFDPOVOFRVJQPEB×BEP
t/PVTFFMTJTUFNBFOQSFTFODJBEFWJFOUPTGVFSUFTPDPOEJDJPOFTDMJNÈUJDBT
adversas, ya que puede tumbarse. Coloque la unidad en su posición de
BMNBDFOBNJFOUPZPFOVOB[POBBSFTHVBSEPEFMWJFOUPMFKPTEFQSPQJFEBEFT
QFSTPOBMFTRVFQVFEBOEB×BSTFTJFMTJTUFNBTFDBFZEFMÓOFBTEFTVNJOJTUSP
de energía.
t/PVTFFMTJTUFNBQBSBMFWBOUBSOJOHÞOPCKFUP&MNFDBOJTNPFTUÈEJTF×BEP
para elevar solamente el peso del tablero con el aro. No cuelgue nada de la
BHBSSBEFSB FM BSP FM UBCMFSP OJ MPT CSB[PT EF FMFWBDJØO ZB RVF FTUP QVFEF
EB×BSFMTJTUFNBZBOVMBSMBHBSBOUÓB
t/FWPVTTVTQFOEF[QBTËMBOOFBVQMVTRVFOÏDFTTBJSFQPVSSFUSPVWFSWPUSF
ÏRVJMJCSFPVÏWJUFSEFCMFTTFSMFTBVUSFTKPVFVST3FMÉDIF[MBOOFBVBVTTJUÙURVF
possible.
t-PSTEVONBUDIQBSUJDVMJÒSFNFOUEBOTMFDBTEFTTNBTITMFWJTBHFEVKPVFVS
OFEPJUQBTGBJSFGBDFBVQBOOFBVËMBOOFBVOJBVmMFU-FKPVFVSSJTRVFEF
graves blessures si ses dents ou son visage entrent en contact avec le panneau,
MBOOFBV PV MF mMFU -FT KPVFVST EPJWFOU UPVKPVST QPSUFS VO QSPUÒHFEFOUT
MPSTRVJMTKPVFOU
t/FHMJTTF[QBTOFHSJNQF[QBTFUOFKPVF[QBTTVSMBCBTFPVMFQPUFBV
t 3FNQMJTTF[ DPNQMÒUFNFOU MB CBTF TFMPO MFT JOTUSVDUJPOT EV GBCSJDBOU /F
MBJTTF[KBNBJTMVOJUÏEFCPVUEFQMFJOQJFETBOTBWPJSEBCPSESFNQMJMBCBTFBWFD
un poids ou l’équipement pourrait basculer rapidement et causer de graves
blessures.
t -PSTRVF WPVT BKVTUF[ MB IBVUFVS PV MPSTRVF WPVT EÏQMBDF[ MÏRVJQFNFOU
HBSEF[WPTNBJOTFUEPJHUTMPJOEFTQJÒDFTNPCJMFT
t/FQFSNFUUF[QBTBVYFOGBOUTEFEÏQMBDFSPVEBKVTUFSMÏRVJQFNFOU
t/FQPSUF[QBTEFCJKPVYCBHVFTNPOUSFTDPMMJFSTFUD
MPSTRVFWPVTKPVF[
$FTPCKFUTQPVSSBJFOUTBDDSPDIFSBVmMFU
t-BTVSGBDFTVSMBRVFMMFFTUQPTÏFMBCBTFEPJUÐUSFMJTTFFUTBOTHSBWJFSPVUPVU
BVUSFPCKFURVJQPVSSBJUUSPVFSMBCBTFFOUSBÔOBOUBJOTJVOFGVJUFDFRVJQPVSSBJU
faire basculer l’équipement.
t-BCBTFOFEPJUQBTOPOQMVTÐUSFQPTÏFTVSBVDVOUZQFEFNBUJÒSFPSHBOJRVF
-IFSCFMFTEÏDIFUTFUDQFVWFOUFOUSBÔOFSMBDPSSPTJPOFUMBEÏUÏSJPSBUJPOEF
l’équipement.
t 6OF GPJT QBS NPJT WÏSJmF[ RVF MF 1PUFBV FU UPVUFT MFT QJÒDFT FO NÏUBM OF
NPOUSFOUQBTEFTJHOFTEFDPSSPTJPOSPVJMMFQJRßSFTÏDBJMMBHF
&OMFWF[UPVUFMB
SPVJMMFFUSFQFJHOF[DPNQMÒUFNFOUBWFDVOFQFJOUVSFQPVSFYUÏSJFVS4JMBSPVJMMF
BQÏOÏUSÏVOFEFTQJÒDFTFOBDJFSWPVTEFWSF[SFNQMBDFSJNNÏEJBUFNFOUMB
pièce en question.
t"DIBRVFGPJTRVFWPVTBMMF[VUJMJTFSMÏRVJQFNFOUWÏSJmF[EBCPSEMÏRVJMJCSF
la possibilité de pièces desserrées ou usées, la stabilité de l’équipement et tout
signe de corrosion ou réparation nécessaire avant utilisation.
t/FKPVF[KBNBJTBWFDVOÏRVJQFNFOUFOEPNNBHÏ
t/VUJMJTF[QBTMÏRVJQFNFOUMPSTEFGPSUFTSBGBMFTEFWFOUPVEFNBVWBJTUFNQT
-ÏRVJQFNFOUQPVSSBJUCBTDVMFS1MBDF[MÏRVJQFNFOUEBOTVOFOESPJUBCSJUÏEV
vent ou loin des structures qu’il pourrait endommager s’il basculait et loin des
mMTÏMFDUSJRVFT
t /VUJMJTF[ QBT MÏRVJQFNFOU QPVS MFWFS PV TPVMFWFS RVPJRVF DF TPJU 4PO
mécanisme a été conçu uniquement pour soutenir le poids du panneau et de
MBOOFBV/BDDSPDIF[SJFOBVNBODIFËMBOOFBVBVQBOOFBVOJBVYMFWJFST
sous peine d’endommager l’équipement et d’annuler la garantie.
'4
www.lifetime.com
55
WARRANTY INFORMATION
-*'&5*.&#"4,&5#"--&26*1.&/5
:&"3-*.*5&%'"$503:8"33"/5:
5)&."/6'"$563&33&4&37&45)&3*()550.",&46#45*565*0/4508"33"/5:$-"*.4*'1"354"3&
UNAVAILABLE OR OBSOLETE.
-JGFUJNFCBTLFUCBMMTZTUFNTBSFXBSSBOUFEUPUIFPSJHJOBMQVSDIBTFSUPCFGSFFGSPNEFGFDUTJO
NBUFSJBMPSXPSLNBOTIJQGPSBQFSJPEPGmWFZFBSTGSPNUIFEBUFPGPSJHJOBMSFUBJMQVSDIBTF5IFXPSE
iEFGFDUTwJTEFmOFEBTJNQFSGFDUJPOTUIBUJNQBJSUIFVTFPGUIFQSPEVDU%FGFDUTSFTVMUJOHGSPNNJTVTF
BCVTFPSOFHMJHFODFXJMMWPJEUIJTXBSSBOUZ5IJTXBSSBOUZEPFTOPUDPWFSEFGFDUTEVFUPJNQSPQFS
JOTUBMMBUJPOBMUFSBUJPOPSBDDJEFOU5IJTXBSSBOUZEPFTOPUDPWFSEBNBHFDBVTFECZWBOEBMJTNSVTUJOH
“acts of nature” or any other event beyond the control of the manufacturer.
5IJTXBSSBOUZJTOPOUSBOTGFSBCMFBOEJTFYQSFTTMZMJNJUFEUPUIFSFQBJSPSSFQMBDFNFOUPGEFGFDUJWF
CBTLFUCBMMFRVJQNFOU*GUIFFRVJQNFOUJTEFGFDUJWFXJUIJOUIFUFSNTPGUIJTXBSSBOUZ-JGFUJNF1SPEVDUT
*ODXJMMSFQBJSPSSFQMBDFEFGFDUJWFQBSUTBUOPDPTUUPUIFQVSDIBTFS4IJQQJOHDIBSHFTUPBOEGSPN
the factory are not covered and are the responsibility of the purchaser. Labor charges and related
FYQFOTFTGPSSFNPWBMJOTUBMMBUJPOPSSFQMBDFNFOUPGUIFCBTLFUCBMMTZTUFNPSJUTDPNQPOFOUTBSFOPU
DPWFSFEVOEFSUIJTXBSSBOUZ
5IJTXBSSBOUZEPFTOPUDPWFSTDSBUDIJOHPSTDVGmOHPGUIFQSPEVDUUIBUNBZSFTVMUGSPNOPSNBM
usage. In addition, defects resulting from intentional damage, negligence, unreasonable use or
IBOHJOHGSPNUIFOFUPSSJNXJMMWPJEUIJTXBSSBOUZ
-JBCJMJUZGPSJODJEFOUBMPSDPOTFRVFOUJBMEBNBHFTJTFYDMVEFEUPUIFFYUFOUQFSNJUUFECZMBX8IJMF
FWFSZBUUFNQUJTNBEFUPFNCPEZUIFIJHIFTUEFHSFFPGTBGFUZJOBMMFRVJQNFOUGSFFEPNGSPNJOKVSZ
DBOOPUCFHVBSBOUFFE5IFVTFSBTTVNFTBMMSJTLPGJOKVSZSFTVMUJOHGSPNUIFVTFPGUIJTQSPEVDU"MM
NFSDIBOEJTFJTTPMEPOUIJTDPOEJUJPOBOEOPSFQSFTFOUBUJWFPGUIFDPNQBOZNBZXBJWFPSDIBOHF
this policy.
5. This product is not intended for institutional or commercial use; Lifetime Products, Inc. does not assume
BOZMJBCJMJUZGPSTVDIVTF*OTUJUVUJPOBMPSDPNNFSDJBMVTFXJMMWPJEUIFXBSSBOUZ
5IJTXBSSBOUZJTFYQSFTTMZJOMJFVPGBMMPUIFSXBSSBOUJFTFYQSFTTFEPSJNQMJFEJODMVEJOHXBSSBOUJFT
PGNFSDIBOUBCJMJUZPSmUOFTTGPSVTFUPUIFFYUFOUQFSNJUUFECZ'FEFSBMBOETUBUFMBX/FJUIFS-JGFUJNF
1SPEVDUT*ODOPSBOZSFQSFTFOUBUJWFBTTVNFTBOZPUIFSMJBCJMJUZJODPOOFDUJPOXJUIUIJTQSPEVDU
5IJTXBSSBOUZHJWFTZPVTQFDJmDMFHBMSJHIUTBOEZPVNBZBMTPIBWFPUIFSSJHIUTXIJDIWBSZGSPN
state to state.
ALL WARRANTY CLAIMS MUST BE ACCOMPANIED BY A SALES RECEIPT.
3&1035130%6$5%&'&$54*/83*5*/(50
-JGFUJNF1SPEVDUT*OD10#PY$MFBSmFME65PSDBMM
M-F 7 a.m. to 5 p.m. MST.
**Call or visit our Web site for Saturday hours**
Please include your dated sales receipt and photographs of damaged parts.
To register the product, visit our Web site at www.lifetime.com
www.lifetime.com
56