PA6.E - Traid Villarroya
Anuncio
PA6 E / PA6 E MOS2 _______________ Termoplástico macromolecular semi-cristalino obtenido por la polimerización de la caprolactama. El uso de un polímero de elevada viscosidad para la extrusión permite que se obtenga un producto de excelentes características mecánicas con un elevado estándar de calidad. Características: x Disponibilidad de calidades conformes a la norma FDA. x Buen aislamiento eléctrico. x Optimas cualidades de resistencia mecánica, dureza y rigidez. x Excelentes cualidades de deslizamiento y fricción. Datos técnicos en página nº 94-106. Semi-crystalline thermoplastic obtained by the polymerization of caprolactam. The extrusion of a high viscosity polymer results in a product with excellent mechanical properties and a very high standard of quality. Characteristics: x Various FDA compliant grades available. x Good electrical insulating properties. x Optimal toughness, rigidity and mechanical strength. x Great sliding and wear properties. Technical data in page nº 94-106. Polymère semi-cristallin obtenu par la polymérisation du caprolactame. L'utilisation de polymère à haute viscosité pour l'extrusion de demi-produits permet d'obtenir les résistances mécaniques les plus élevées et un haut niveau de qualité. Caractéristiques : x Disponibilité de grades conformes aux normes FDA x Bonne isolation électrique x Bonne Résistance mécanique, dureté et rigidité. x Excellentes qualités de glissement et frottement. Caractèristiques techniques, voir page nº 94-106. Halbkristallines Polymer stammt aus der Polymerisation von Caprolactam. Die Verwendung von hochviskosen Polymer für die Extrusion garantiert die höchsten mechanischen Eigenschaften und ein hohes Qualitätsniveau. Eigenschaften : x Verschiedene von der FDA zugelassene Typen im Angebot. x Gute elektrische Isolierungseigenschaften. x Gute Schlagzähigkeit, hohe dynamische Belastbarkeit, Festigkeit und Steifigkeit. x Gute Gleit und Notlaufeigenschaften. Materialrichtwerte seite nº 94-106. Polimero semicristallino ottenuto dalla polimerizzazione del caprolattame. L'utilizzo di polimero ad alta viscosità per l'estrusione permette di ottenere le più alte resistenze meccaniche ed un elevato livello qualitativo. Caratteristiche: x Materiali che conforme alle norme FDA. x Alta tenacità, buona resistenza alla rottura, alla trazione ed agli urti. x Alta resistenza mecánica anche a temperature elevate, ed in ambienti difficili. x Resistenza alla fatica, mantiene le caratteristiche anche sotto sforzi ripetuti. Caratteristiche pagina nº 94-106. TKG® C/ ISABEL DE SANTO DOMINGO 35 50014 ZARAGOZA (SPAIN) TEL.:+34976471211 FAX.:+34976472841 [email protected] www.traidvillarroya.com www.tkg.es www.tvh.es -4- PA6 E / PA6 E MOS2 Barras / Rods / Barres / Rundstäbe / Tondi Diámetromm.Ø Diametermm.Ø Diametremm.Ø Durchmessermm.Ø Toleranciamm. Tolérancemm. Toleranzmm. Tolleranzamm. Pesoaprox.Kg/m. Apr.weightKg/m. Poidsth.Kg/m. Ca.GewichtKg/m. Diámetromm.Ø Diametermm.Ø Diametremm.Ø Durchmessermm.Ø Toleranciamm. Tolérancemm. Toleranzmm. Tolleranzamm. Pesoaprox.Kg/m. Apr.weightKg/m. Poidsth.Kg/m. Ca.GewichtKg/m. 6 8 10 12 14 15 16 18 20 22 25 28 30 32 35 40 45 50 55 60 65 70 75 80 85 +0.1/+0.4 +0.1/+0.5 +0.1/+0.5 +0.2/+0.7 +0.2/+0.7 +0.2/+0.7 +0.2/+0.7 +0.2/+0.7 +0.2/+0.7 +0.2/+0.9 +0.2/+0.9 +0.2/+0.9 +0.2/+0.9 +0.2/+0.9 +0.2/+1.1 +0.2/+1.1 +0.3/+1.3 +0.3/+1.3 +0.3/+1.3 +0.3/+1.6 +0.3/+1.6 +0.3/+1.6 +0.3/+1.6 +0.4/+2.0 +0.4/+2.0 0,038 0,067 0,102 0,149 0,199 0,227 0,26 0,33 0,40 0,49 0,62 0,77 0,88 1,00 1,21 1,56 1,98 2,43 2,92 3,50 4,09 4,73 5,41 6,20 6,97 90 95 100 110 120 125 130 135 140 150 160 170 175 180 190 200 210 220 230 240 250 260 270 280 290 300 +0.5/+2.2 +0.5/+2.2 +0.6/+2.5 +0.7/+3.0 +0.8/+3.5 +0.8/+3.5 +0.8/+3.5 +0.8/+3.5 +0.9/+3.8 +1.0/+3.8 +1.1/+4.2 +1.1/+4.5 +1.2/+5.0 +1.2/+5.0 +1.2/+5.0 +1.3/+5.5 +1.4/+5.8 +1.4/+5.8 +1.4/+5.8 +1.4/+5.8 +1.5/+6.2 +1.5/+6.2 +1.5/+6.2 +1.6/+6.5 +1.6/+6.5 +1.8/+8.0 7,83 8,70 9,68 11,76 14,05 15,21 16,42 17,67 19,05 21,79 24,83 28,04 29,84 31,52 35,02 38,89 42,89 46,95 51,20 55,89 60,45 65,26 70,57 75,59 81,34 87,36 Largo standard: 3000 mm. 2000 mm. y 1000 mm. Standard length: 3000 mm. 2000 mm. and 1000 mm. Longueur standard: 3000 mm. 2000 mm. et 1000 mm. Standardlänge: 3000 mm. 2000 mm. und 1000 mm. Lunghezza standard: 3000 mm. 2000 mm. e 1000 mm. Otras dimensiones y largos bajo consulta Other dimensions and lengths on request D´autres dimensions et longueurs sur demande Andere Nennmasse und Längen auf anfrage Contattateci per dimensioni non in elenco Datos técnicos en página nº 94-106 Technical data in page nº 94-106 Caractèristiques techniques, voir page nº 94-106 Materialrichtwerte seite nº 94-106 Caratteristiche pagina nº 94-106 TKG® C/ ISABEL DE SANTO DOMINGO 35 50014 ZARAGOZA (SPAIN) TEL.:+34976471211 FAX.:+34976472841 [email protected] www.traidvillarroya.com www.tkg.es www.tvh.es -5- PA6 E / PA6 E MOS2 Placas / Plates / Plaques / Platten / Lastre Dimensiónmm. Dimensionmm. Nenmassemm. Dimensionimm. 2000x1000x1 2000x1000x1,5 2000x1000x2 2000x1000x2,5 2000x1000x3 2000x1000x4 2000x1000x5 2000x1000x6 2000x1000x8 2000x1000x10 2000x1000x12 2000x1000x15 2000x1000x16 2000x1000x18 2000x1000x20 2000x1000x25 2000x1000x30 2000x1000x35 2000x1000x40 2000x1000x45 2000x1000x50 2000x1000x55 2000x1000x60 2000x1000x70 2000x1000x80 2000x1000x90 2000x1000x100 Largo standard: 3000 mm. 2000 mm. y 1000 mm. Standard length: 3000 mm. 2000 mm. and 1000 mm. Longueur standard: 3000 mm. 2000 mm. et 1000 mm. Standardlänge: 3000 mm. 2000 mm. und 1000 mm. Lunghezza standard: 3000 mm. 2000 mm. e 1000 mm. Toleranciamm. Tolérancemm. Toleranzmm. Tolleranzamm. 0.1/+0.1 0.15/+0.15 0.15/+0.15 0.2/+0.2 0.2/+0.2 0.2/+0.2 0.25/+0.25 0.25/+0.25 +0.2/+0.9 +0.2/+0.9 +0.3/+1.5 +0.3/+1.5 +0.3/+1.5 +0.3/+1.5 +0.3/+1.5 +0.3/+1.5 +0.3/+1.5 +0.5/+2.5 +0.5/+2.5 +0.5/+2.5 +0.5/+2.5 +0.5/+2.5 +0.5/+3.5 +0.5/+3.5 +0.5/+3.5 +0.8/+4.5 +1.0/+5.5 Pesoaprox.Kg/Ud. Apr.weightKg/Pc. Poidsth.Kg/Pl. Ca.GewichtKg/St. 2,60 3,99 5,20 6,53 7,74 10,16 12,70 15,12 21,53 26,37 32,65 39,91 41,60 46,80 52,01 64,10 76,19 90,71 102,80 117,10 126,99 143,20 153,60 177,79 201,97 223,07 249,03 Otras dimensiones y largos bajo consulta Other dimensions and lengths on request D´autres dimensions et longueurs sur demande Andere Nennmasse und Längen auf anfrage Contattateci per dimensioni non in elenco Datos técnicos en página nº 94-106 Technical data in page nº 94-106 Caractèristiques techniques, voir page nº 94-106 Materialrichtwerte seite nº 94-106 Caratteristiche pagina nº 94-106 TKG® C/ ISABEL DE SANTO DOMINGO 35 50014 ZARAGOZA (SPAIN) TEL.:+34976471211 FAX.:+34976472841 [email protected] www.traidvillarroya.com www.tkg.es www.tvh.es -6- PA6 E / PA6 E MOS2 Tubos / Tubes / Ébauches / Hohlstäbe / Forati Diámetromm.ØxØ Diametermm.ØxØ Diametremm.ØxØ Durchmessermm.ØxØ 25x10 25x12 25x15 25x18 25x20 30x15 30x20 35x15 35x20 35x25 40x15 40x20 40x25 40x30 40x35 45x20 45x25 45x30 45x35 50x20 50x25 50x30 50x35 50x40 55x25 55x30 55x35 55x45 55x50 60x20 60x25 60x30 60x35 60x40 60x45 60x50 60x55 65x30 65x35 65x40 65x45 65x50 65x55 70x25 70x30 70x35 70x40 70x45 Toleranciamm. Tolérancemm. Toleranzmm. Tolleranzamm. +1.1/1.1 +1.1/1.1 +1.1/1.1 +1.1/1.1 +1.1/1.1 +1.1/1.1 +1.1/1.1 +2.0/2.0 +2.0/2.0 +2.0/2.0 +2.0/2.0 +2.0/2.0 +2.0/2.0 +2.0/2.0 +2.0/2.0 +2.0/2.0 +2.0/2.0 +2.0/2.0 +2.0/2.0 +2.0/2.0 +2.0/2.0 +2.0/2.0 +2.0/2.0 +2.0/2.0 +2.5/2.5 +2.5/2.5 +2.5/2.5 +2.5/2.5 +2.5/2.5 +2.5/2.5 +2.5/2.5 +2.5/2.5 +2.5/2.5 +2.5/2.5 +2.5/2.5 +2.5/2.5 +2.5/2.5 +3.0/3.0 +3.0/3.0 +3.0/3.0 +3.0/3.0 +3.0/3.0 +3.0/3.0 +3.0/3.0 +3.0/3.0 +3.0/3.0 +3.0/3.0 +3.0/3.0 Largo standard: 3000 mm. 2000 mm. y 1000 mm. Standard length: 3000 mm. 2000 mm. and 1000 mm. Longueur standard: 3000 mm. 2000 mm. et 1000 mm. Standardlänge: 3000 mm. 2000 mm. und 1000 mm. Pesoaprox.Kg/m. Apr.weightKg/m. Poidsth.Kg/m. Ca.GewichtKg/m. 0,54 0,51 0,43 0,38 0,27 0,70 0,52 1,03 0,88 0,70 1,43 1,28 1,08 0,83 0,54 1,69 1,49 1,24 0,95 2,15 1,95 1,70 1,41 1,07 2,51 2,27 1,97 1,25 0,82 3,26 3,07 2,82 2,53 2,19 1,81 1,37 0,90 3,47 3,18 2,85 2,46 2,04 1,56 4,37 4,12 3,84 3,50 3,12 Diámetromm.ØxØ Diametermm.ØxØ Diametremm.ØxØ Durchmessermm.ØxØ 70x50 70x55 70x60 75x25 75x35 75x40 75x45 75x50 75x60 75x65 80x30 80x35 80x40 80x45 80x50 80x60 80x65 80x70 85x30 85x40 85x60 85x65 85x70 85x75 90x30 90x40 90x50 90x60 90x70 90x75 90x80 100x35 100x40 100x50 100x60 100x70 100x80 100x85 100x90 110x40 110x45 110x50 110x60 110x70 110x80 110x90 120x50 120x60 Otras dimensiones y largos bajo consulta Other dimensions and lengths on request D´autres dimensions et longueurs sur demande Andere Nennmasse und Längen auf anfrage Toleranciamm. Tolérancemm. Toleranzmm. Tolleranzamm. +3.0/3.0 +3.0/3.0 +3.0/3.0 +3.0/3.0 +3.0/3.0 +3.0/3.0 +3.0/3.0 +3.0/3.0 +3.0/3.0 +3.0/3.0 +3.0/3.0 +3.0/3.0 +3.0/3.0 +3.0/3.0 +3.0/3.0 +3.0/3.0 +3.0/3.0 +3.0/3.0 +3.0/3.0 +3.0/3.0 +3.0/3.0 +3.0/3.0 +3.0/3.0 +3.0/3.0 +3.0/3.0 +3.0/3.0 +3.6/5.0 +3.6/5.0 +3.6/5.0 +3.6/5.0 +3.6/5.0 +3.6/5.0 +3.6/5.0 +3.6/5.0 +3.6/5.0 +3.6/5.0 +3.6/5.0 +3.6/5.0 +3.6/5.0 +3.6/5.0 +3.6/5.0 +3.6/5.0 +3.6/5.0 +3.6/5.0 +3.6/5.0 +4.5/6.5 +4.5/6.5 +4.5/6.5 Datos técnicos en página nº 94-106 Technical data in page nº 94-106 Caractèristiques techniques, voir page nº 94-106 Materialrichtwerte seite nº 94-106 TKG® C/ ISABEL DE SANTO DOMINGO 35 50014 ZARAGOZA (SPAIN) TEL.:+34976471211 FAX.:+34976472841 [email protected] www.traidvillarroya.com www.tkg.es www.tvh.es -7- Pesoaprox.Kg/m. Apr.weightKg/m. Poidsth.Kg/m. Ca.GewichtKg/m. 2,69 2,22 1,69 5,06 4,54 4,21 3,82 3,39 2,39 1,82 5,57 5,29 4,95 4,57 4,14 3,14 2,57 1,95 6,37 5,74 3,94 3,36 2,74 2,08 7,21 6,59 5,99 5,02 3,85 3,20 2,50 8,93 8,61 7,82 6,85 5,69 4,34 3,59 2,80 10,63 10,26 9,84 8,87 7,71 6,36 4,82 12,28 11,32 PA6 E / PA6 E MOS2 Tubos / Tubes / Ébauches / Hohlstäbe / Forati Diámetromm.ØxØ Diametermm.ØxØ Diametremm.ØxØ Durchmessermm.ØxØ 120x70 120x80 120x90 120x100 125x80 125x90 125x100 130x50 130x60 130x80 130x90 130x100 130x110 140x60 140x70 140x80 140x90 140x100 140x110 140x120 150x50 150x70 150x80 150x90 150x100 150x110 150x120 160x50 160x60 160x80 160x90 160x100 160x120 160x130 160x140 170x60 170x80 170x100 170x120 170x130 170x140 180x70 180x100 180x110 180x120 180x140 180x150 180x160 Toleranciamm. Tolérancemm. Toleranzmm. Tolleranzamm. +4.5/6.5 +4.5/6.5 +4.5/6.5 +4.5/6.5 +4.5/6.5 +4.5/6.5 +4.5/6.5 +4.5/6.5 +4.5/6.5 +4.5/6.5 +4.5/6.5 +4.5/6.5 +4.5/6.5 +4.5/6.5 +4.5/6.5 +4.5/6.5 +4.5/6.5 +4.5/6.5 +4.5/6.5 +4.5/6.5 +4.5/6.5 +4.5/6.5 +4.5/6.5 +4.5/6.5 +4.5/6.5 +4.5/6.5 +4.5/6.5 +5.4/7.5 +5.4/7.5 +5.4/7.5 +5.4/7.5 +5.4/7.5 +5.4/7.5 +5.4/7.5 +5.4/7.5 +5.4/7.5 +5.4/7.5 +5.4/7.5 +5.4/7.5 +5.4/7.5 +5.4/7.5 +5.4/7.5 +5.4/7.5 +5.4/7.5 +5.4/7.5 +5.4/7.5 +5.4/7.5 +5.4/7.5 Largo standard: 3000 mm. 2000 mm. y 1000 mm. Standard length: 3000 mm. 2000 mm. and 1000 mm. Longueur standard: 3000 mm. 2000 mm. et 1000 mm. Standardlänge: 3000 mm. 2000 mm. und 1000 mm. Pesoaprox.Kg/m. Apr.weightKg/m. Poidsth.Kg/m. Ca.GewichtKg/m. 10,18 8,84 7,32 5,61 10,02 8,51 6,80 14,69 13,73 11,26 9,74 8,03 6,13 16,33 15,19 13,85 12,34 10,63 8,73 6,64 20,08 17,98 16,64 15,12 13,41 11,51 9,43 23,29 22,34 19,89 18,38 16,68 12,72 10,46 8,00 25,52 23,06 19,86 15,90 13,63 11,18 27,75 23,22 21,34 19,26 14,55 11,90 9,07 Diámetromm.ØxØ Diametermm.ØxØ Diametremm.ØxØ Durchmessermm.ØxØ 190x70 190x140 190x160 200x70 200x90 200x100 200x130 200x140 200x150 200x160 210x150 210x160 220x70 220x75 220x160 220x190 230x120 230x160 230x170 230x190 250x70 250x150 250x170 260x130 260x160 260x170 260x190 265x90 265x210 270x90 280x100 280x140 280x210 280x240 300x90 300x100 310x130 350x200 400x200 400x300 450x200 450x300 500x200 500x300 500x375 Otras dimensiones y largos bajo consulta Other dimensions and lengths on request D´autres dimensions et longueurs sur demande Andere Nennmasse und Längen auf anfrage Toleranciamm. Tolérancemm. Toleranzmm. Tolleranzamm. +5.4/7.5 +5.4/7.5 +5.4/7.5 +5.4/7.5 +5.4/7.5 +6.0/8.5 +6.0/8.5 +6.0/8.5 +6.0/8.5 +6.0/8.5 +6.0/8.5 +6.0/8.5 +6.0/8.5 +6.0/8.5 +9.0/10.0 +9.0/10.0 +9.0/10.0 +9.0/10.0 +9.0/10.0 +9.0/10.0 +9.0/10.0 +9.0/10.0 +9.0/10.0 +9.0/10.0 +9.0/10.0 +9.0/10.0 +9.0/10.0 +9.0/10.0 +9.0/10.0 +9.0/10.0 +9.0/10.0 +9.0/10.0 +9.0/10.0 +9.0/10.0 +9.0/10.0 +9.0/10.0 +9.0/10.0 +11.0/14.0 +11.0/14.0 +11.0/14.0 +13.0/16.0 +13.0/16.0 +13.0/16.0 +13.0/16.0 +13.0/16.0 Datos técnicos en página nº 94-106 Technical data in page nº 94-106 Caractèristiques techniques, voir page nº 94-106 Materialrichtwerte seite nº 94-106 TKG® C/ ISABEL DE SANTO DOMINGO 35 50014 ZARAGOZA (SPAIN) TEL.:+34976471211 FAX.:+34976472841 [email protected] www.traidvillarroya.com www.tkg.es www.tvh.es -8- Pesoaprox.Kg/m. Apr.weightKg/m. Poidsth.Kg/m. Ca.GewichtKg/m. 31,30 18,10 12,63 35,04 32,21 30,79 24,59 22,16 19,53 16,72 23,47 20,65 43,34 42,71 25,91 16,39 40,32 30,26 27,28 20,74 57,93 42,33 36,55 52,27 44,45 41,47 34,93 62,60 30,17 65,18 68,80 60,25 38,04 25,69 81,62 79,95 79,68 85,59 121,57 76,12 163,47 118,22 208,96 163,71 117,41
