Soil testing and sampling solutions. TEC 12 Series. Sampling drill / Perforadora TEC Soil Testing in environmental and geotechnical applications. Investigación de suelos para aplicaciones ambientales y geotécnicas. Main features /características generales: Low weight / Peso reducido: 1000 Kgs. Compact dimensions / Dimensiones compactas: L2100mm, W780mm, H1450mm. Fit standard door openings / Paso por puertas de ancho standard. Strong design / diseño robusto. Rotary head / cabezal de rotación. Improved shift between rotary head, drop hammer and extraction device / Cambio SPT-cabeza-extractor mejorado. New designed TEC series to perform sample and rotary/auger drill with same rig Omega profile mast to lighten and strengthen ensuring total weight of 1000 kgs. Can be transport-ed on standard vans. Rubber tracks, hydraulic jacks for proper levelling at site. Unsurpassable and simple device to shift between SPT-rotary head and mast rod extractor. 15 ton Casing extractor in-cluded. Nuevo diseño de la conocida serie TEC, para realizar ensayos de penetracion dinamica, muestra inalterada y sondeos a rotacion y elice continua. Nueva columna de perforación con perfil omega para aligerar y reforzar ofreciendo un peso total de 1000 kgs. Puede transportarse en furgonetas estandar. Insuperable sistema de cambio entre SPT-cabezal de rotacion y extractor de mastil. Ex-tractor de revestimiento de 15 ton incluido. Applications. / Aplicaciones: Standard penetration test / Pruebas de penetración dinámica. Soil sampling with percusive core barrels / Muestreo inalterado Rotary drill. Auger Drill. TECHNICAL DETAILS / DATOS TÉCNICOS Engine / Motor Brand and model / Marca modelo Yanmar L100AE. No. Cylinders- stroke /Nº cil-desplazamiento 1 cil. 389cm3. 2 cil. Power / Potencia 13HP @ 3600 rpm. Rpm.3.500 Hydraulic system / Sistema hidráulico Pumps / Bombas Working pressure / presión de trabajo OIl capacity / Capacidad dep. hid. Crawlers / Orugas Width / Ancho Shoe wide / Ancho de teja Nº rollers / nº rodillos Travel speed / Vel. Traslación Total weight / Peso total Maximun slope / Pendiente sup Rotary head / Cabezal de rotación Type / tipo. Max. torq and rpm / Potencia y rpm max. SPT-hammer system / Martillo SPT Feed length. / carrera de caida Hammer weight / Peso Drill mast direct push type / Mástil de tipo tiro directo Stroke / Carrera Pull up / pull down Hydraulic clamps / Mordazas hidraulicas Type / Tipo Opening / Apertura 3 gear pumps 4cm3 each 150 bar 65 litros 760 mm. 180mm. 6 3,4 Km/h. 1000 Kg. 20º (45%) TECR1 40 daN@200 rpm. 760mm, 500mm optional 63,5 Kgs. 65 y 50 kgs. optionall 1500mm. 4000 kgs / 2000 kgs Simple 25mm-125mm TEC 15 Sampling drill / Perforadora TEC 15 Soil Testing in environmental and geotechnical applications. Investigación de suelos para aplicaciones ambientales y geotécnicas. Main features / caracteríscas generales: Low weight / Peso reducido: 1000 Kgs. Compact dimensions / Dimensiones compactas: L2100mm, W780mm, H1450mm. Fit standard door openings / Paso por puertas de ancho standard. Strong design / diseño robusto. Rotary head / cabezal de rotación. Improved shi2 between rotary head, drop hammer and extraction device / Cambio SPT-cabeza-extractor mejorado. New designed TEC series to perform sample and rotary/auger drill with same rig Omega profile mast to lighten and strengthen ensuring total weight of 1000 kgs. Can be transported on standard vans. Rubber tracks, hydraulic jacks for proper levelling at site. Unsurpassable and simple device to shi2 between SPT-rotary head and mast rod extractor. 15 ton Casing extractor included. Nuevo diseño de la conocida serie TEC, para realizar ensayos de penetración dinámica, muestra inalterada y sondeos a rotación y élice continua. Nueva columna de perforación con perfil omega para aligerar y reforzar ofreciendo un peso total de 1000 kgs. Puede transportarse en furgonetas estandar. Insuperable sistema de cambio entre SPT-cabezal de rotación y extractor de mastil. Extractor de revestimiento de 15 ton incluido. Applications. / Aplicaciones: Standard penetration test / Pruebas de penetración dinámica. Soil sampling with percusive core barrels / Muestreo inalterado. Rotary drill. Auger Drill. New FLEX-shi’® system that allows to choose the work method by just pull a pin - drop hammer, rotary head or extraction device. Allows to perform drive sampling, standard penetration test and rotary drilling with the same rig. Nuevo sistema FLEX-shi’® que permite seleccionar entre modo SPT-cabezal de rotación o extractor de torre con el simple cambio de un bulÓn. Permite realizar ensayos de muestra inalterada, penetración dinámica, y rotación con la misma perforadora. TECHNICAL DETAILS / DATOS TÉCNICOS Engine / Motor Brand and model / Marca modelo No. Cylinders- stroke / Nº cil-desplazamiento Power / Potencia Kubota D902 3 cil. 22HP @ 3600 rpm Rpm3600 Hydraulic system / Sistema hidráulico Pumps / Bombas Working pressure / presión de trabajo OIl capacity / Capacidad dep. hid. Two gear pumps 180 bar. 80 lts. Crawlers / Orugas. Radio remote controlled / via radio Width / Ancho 1050 mm. Shoe wide. / Ancho de teja. 180mm Nº rollers / nº rodillos 6 Travel speed / Vel. Traslación 3,4 Km/h. Total weight / Peso total 1400 Kg. Maximun slope / Pendiente sup 20º (45%) Rotary head / Cabezal de rotación Type / tipo Max. torq and rpm / Potencia y rpm max. TECR2 140 daN@250 rpm SPT-hammer system / Martillo SPT Automatic / automático Feed length / carrera de caida Hammer weight / Peso 760mm, 500mm opcional 63,5 Kgs. 65 y 50 kgs. opcional Drill mast direct push type / Mástil de tipo tiro directo Stroke / Carrera Pull up / pull down 1500mm 4000 kgs / 2000 kgs Hydraulic clamps / Mordazas hidraulicas Type / Tipo Opening / Apertura Simple 25mm-125mm Penetrometer SPT TEC 10 Soil testing in environmental and geotechnical applications APPLICATIONS Standard penetration test. (SPT) Dynamic super heavy probes (DPSH) Dynamic heavy probes (DPH) Soil sampling with percussive core barrels. Installation of gas /water monitoring wells. MAIN CHARACTERISTICS Low weight: 850 Kgs. Compact dimensions: L2030mm x W770mm x H1360mm. Fit standard doors openings. Easy to use drive head, that makes very easy connecting tooling which increase productivity. Strong design of automatic hammer. Coring head to drill concrete. DRILLING TOOLS SPT SPT Rods 2.1x39.4 in in Rods 2.1x39.4 Impactor head head TEC10 Impactor TEC10 SPT Split SPT SPT 2.1in 2.1in SPT Split Shoe Shoe DPSH Rods 1.3x39.4 in in Rods 1.3x39.4 Impactor head head TEC10 TEC10 Impactor Lost cone cone DPSH DPSH in cone cone 90º 90º Lost 22 in Borros 1x1x3.68 in in Borros 1x1x3.68 WINDOWLESS SAMPLERS Sampler 2.6,3,3.4,4,4.6 Sampler 2.6,3,3.4,4,4.6 CAsing Casing Rods Rods Impactor rods rods Impactor 4.4, 55 in in 4.4, 1-1/2” xx 39.4 39.4 1-1/2” 1.3x39.4 in in 1.3x39.4 50mmX1000mm square thread 50mmX1000mm square thread TEC10 TEC10 32mmx1000mm thread 6H xx 1” 1” 32mmx1000mm thread 6H TEC10 TEC10 50mm cone 90º Split SPT SPT 50mm 50mm Split Closed,open open Closed, 66,76,86,101,116 mm mm long=1000mm long=1000mm 66,76,86,101,116 TECHNICAL DATA Engine Engine Brand and and model model Brand No.Cylinders/stroke No.Cylinders/stroke Power 13HP 3600 3600 rpm rpm Power 13HP Rpm Rpm Hydarulic system system Hydraulic Nº pumps pumps yy type tipe 3x4 g/min g/min Nº 3x4 Working pressure pressure 2176 psi psi Working 2176 Oil capacity capacity 14.3 g g Oil 14.3 Tracks Tracks Shoe wide wide Shoe No. rollers rollers No. Travel speed speed 1,5 m/h m/h Travel 1,5 Total weigth weigth 1874 lb lb Total 1874 HAMMER SYSTEM– AUTOMATIC Feed length length Feed Hammer weigth weigth Hammer Sampling depth depth Sampling 19.7/29.9 in in 19.7/29.9 110.2/140 lb lb 63,5 63,5 Kgs. Kgs. 110.2/140 33 feet feet 33 50mm cone 90º 40x40x145 cone 90º 90º 40x40x145 cone 113, 128mm 128mm 113, 54mmX1000mm Thread Thread Whitworth Whitworth 1-1/2” 1-1/2” 54mmX1000mm 35x1000mm Thread Thread R32 R32 35x1000mm Yanmar L100AE. L100AE. Yanmar cilindro 389cm3. 11 cylinder 389cm3. 7,4 kW kW // 3600 3600 rpm. rpm. 7,4 3500 3500 gear pumps-4cm3 pumps-4cm3 33 gear 150 bar bar 150 65 liters. litros. 65 180mm. 180mm. 66 2,1-3,4 Km/h. Km/h. 2,1-3,4 870 Kg. Kg. 870 760mm, 500mm 500mm optional opcional 760mm, 65 yy 50 50 kgs. kgs. optional opcional 65 10 meters meters // 33 33 feet feet 10 ROTARY HEAD ROTEC02 Two speed speed small small rotary rotary head head for for water/mud water/mud Two and auger auger drilling. drilling. Stroke Stroke 1200mm. 1200mm. and Available torque torque and and speed speed in in DaNm DaNm /rpm /rpm Available with hyd. hyd. motor motor shift: shift: with Hyd. motor motor Hyd. 50 50 80 80 100 100 125 125 160 160 rpm rpm DaNm rpm rpm DaNm 258 387 9 387258 10 375 187 15 375187 19 300 150 20 300150 24 237 118 28 237118 30 187 93 38 18793 40 netrometer SPT TEC3. esting in environmental and geotechnical applications. cations. Penetrometer SPT TEC 03 rd penetration test. (SPT) ic super heavy probes (DPSH) ic heavy probes (DPH) Soil testing in environmental and geotechnical applications. mpling with percussive core barrels. tion of gas /water monitoring wells. APPLICATIONS Standard penetration test. (SPT) Dynamic super heavy probes (DPSH) Dynamic heavy probes (DPH) Soil sampling with percussive core barrels. Installation of gas /water monitoring wells. Hand portable, one man operation. Low weight: 190 + 98 Kgs. Compact dimensions: L 750 x W applications. 770 x H 1400mm Easy to use, the telescopic mast needs no spend time in positioning at work. The automatic hammer elevation is made by the hydraulic cylinder. netrometer SPT TEC3. esting in environmental and geotechnical cations. rd penetration test. (SPT) ic super heavy probes (DPSH) ic heavy probes (DPH) mpling with percussive core barrels. tion of gas /water monitoring wells. MAIN CHARACTERISTICS Main characteristics. Hand portable, one man operation. Low weight: 190 + 98 Kgs. Compact dimensions: L 750 x W 770 x H 1400mm Easy to use, the telescopic mast needs no spend time in positioning at work. The automatic hammer elevation is made by the hydraulic cylinder. Technic TECHNICAL DATA Power pack Brand and model No.Cylinders/stroke Power 6.37 HP Rpm 3600 Honda/Kohler fuel engine 1 cylinder 4.9 kW 3600 Hydraulic system. RNº pumps y tipe Working pressure. Oil capacity 1 gear pump-4cm3 150 bar 20 liters. 1x4 g/min 2176 psi 4.5 g Extraction device Type Capacity 10 daN Double cylinder 10 ton. Weight Penetrometer Power pack 190 kgs. 98 kgs. Extraction device Type CapacityWeight Penetrom 408 lbs 107 lbs Hammer system– automatic Feed length 19.7/29.9 in Hammer weigth 1 10.2/140 lb Sampling depth 33 feet Weight Power pa Hammer Penetrometer Feed leng Power pack HammerHammer system–w Feed length Sampling Hammer weigth SamplingDrilling depth 760mm, 500mm opcional 63,5 Kgs. 65 y 50 kgs. opcional 10 meters / 33 feet DRILLING TOOLS SPT Rods. 2.1x39.4 in Impactor head TEC10 SPT Split SPT 2.1in Shoe DPSH Rods Impactor head Lost cone DPSH Borros Windowless samplers Sampler Casing Rods Impactor rods Power pa Brand and No.Cylind Technical data Power pack Power Brand and model Rpm No.Cylinders/strok Hydarulic Power Nº pumps Rpm Working p Hydarulic Oilsystem capac Nº pumps y tipe Extractio Working pressure. Type Oil capacity Capacity SPT Drilling tools SPT Rods. Rods. Impactor ImpactorSPT head 50mmX1000mm square thread TEC10 Split SPT 50mm Closed, open SPT Shoe Shoe DPSH. DPSH. Rods Rods Impactor ImpactorLost headcone 1.3x39.4 in TEC10 2 in cone 1x1x3.68 in 32mmx1000mm thread 6H x 1” TEC10 90º 50mm cone 90º 40x40x145 cone 90º Lost cone DPSH 2.6,3,3.4,4,4.6 4.4, 5 in 1-1/2” x 39.4 1.3x39.4 in 66,76,86,101,116 mm long=1000mm 113, 128mm 54mmX1000mm Thread Whitworth 1-1/2” 35x1000mm Thread R32 Casing Technical data. Power pack TechnicalBrand data. and model Power packNo.Cylinders/stroke Brand and model Power No.Cylinders/stroke Rpm Power Hydarulic system. Rpm Nº pumps y tipe Hydarulic system. Working pressure. Nº pumps y Oil tipecapacity 6.37 HP 3600 6.37 HP 3600 1x4 g/min 1x4 g/min 2176 psi 4.5 g Honda/Kohler fuel engine 1 cylinder . Honda/Kohler fuel engine 4.9 kW 1 cylinder . 3600 4.9 kW 13600 gear pump-4cm3 150 bar 1 gear pump-4cm3 20 liters. Borros Borros Windowl Windowless samp Sampler Sampler Rods Casing Rods Impactor Impactor rods TecPen– SPT,DPSH, DPH, DPL DATA LOGGER TecPen SPT, DPSH, DPH, DPL Data Logger SPT Datalogger. GS f S , DM, DH DSH. f S . f . f fi f C. S . SPT DATALOGGER TecPen is an automatic data recorder with builtin GPS for SPT tests, DPM, DPH and DPSH. It can be installed on any type of automatic SPT hammer. Installation only takes a few minutes. It records the complete parameters of the test and store them in its internal memory to finally transferred to the PC. Software included. ABS CASE IP66 ABS 66. LCD L f . U . M . M : 90x160x50 . ABS case IP66. LCD screen Lipo battery for 8 hours. Ultrasonic sensor depth measurement. Main battery charger and car lighter charger. Measures console: 90x160x50 mm. SOFTWARE S. The included software provides a graph and final values GPS location of the test. with Customer reference, penetrometer and person fi GS nel performing the test can also be recorded in . the final report. f C f, f fi . Penetrometer SPT TEC 01 The SPT TEC01 is an automatic penetrometer that can be install on any drill rig. AUTOMATIC HAMMER Impact rate Feed length Hammer weight Total weight 1-30 bpm 760mm, 500mm optional 63,5 Kgs. 65 and 50 kgs. optional 115 Kgs. +/- 10% HYDRAULIC REQUIREMENTS For SPT hammer 0-8 l/min at 150 bar. Penetrometer SPT TEC 130 AUTOMATIC HAMMER Impact rate Feed length Hammer weight Total weight 1-30 bpm 760mm, 500mm optional 63,5 Kgs. 65 and 50 kgs. optional 115 Kgs. +/- 10% HYDRAULIC REQUIREMENTS For SPT hammer For hyd. Cilinder 0-8 l/min at 150 bar. 0-30 l/min at 80 bar. Tecopsa recommend to use ProRock drilling tools. TECOP, S.A. C/ Granito, 16-17 • 28412 Cerceda - Madrid (Spain) Tel. (+34)91 842 00 55 Fax (+34) 91 842 04 18 • [email protected]