en otra ventana

Bibliografía
Bibliografía.
[Chrissis, 2003].
Chrissis Mary Beth, Konrad Mike and Shrum Sandy. CMMI®: Guidelines for
Process Integration and Product Improvement. Addison Wesley, April 2003.
[Deming, 1986].
Deming, W. E. “Out of the crisis.” Cambridge, MA: Massachusetts Institute of
Technology, Center for Advanced Engineering Study, 1986.
[Dennis, 2003].
Dennis, M. Ahern. CMMI® Distilled: A Practical Introduction to Integrated Process
Improvement. Second Edition, Addison Wesley, September 2003.
[Garcia, 2001]
García Romero, Claudia. “El Modelo de Capacidad de Madurez y su aplicación en
Empresas Mexicanas de Software.” Tesis Licenciatura. Ingeniería en Sistemas
Computacionales. Departamento de Ingeniería en Sistemas Computacionales, Escuela
de Ingeniería, Universidad de las Américas-Puebla. Mayo 2001.
[Heinz, 2003].
Heinz, Lauren. “CMMI Adoption Trends.” Online, 2003.
Disponible en:
http://interactive.sei.cmu.edu/news@sei/features/2003/4q03/feature-1-4q03.htm
[Humphrey, 1989].
Humphrey, Watts S. Managing the Software Process. Reading, MA: Addison-Wesley,
1989.
[ISO, 1998].
International Organization for Standardization and International Electrotechnical
Commission. “ISO/IEC TR 15504 Information Technology—Software Process
Assessment.” 1998. Disponible en: http://www.iso.ch/
[Jurow, 1993].
Jurow, S. & Barnard, S. B. “Introduction: TQM fundamentals and overview of
contents.” Journal of Library Administration. 18(1/2), 1-13. 1993.
Bibliografía
[Kan, 2002].
Kan, Stephen H. Metrics and Models in Software Quality Engineering. Addison
Wesley, September 2002.
[Moreno, 2004]
Moreno Álvarez, José Luis. “Aplicación de un Sistema Experto para el desarrollo de
Sistema Evaluador del modelo Capability Maturity Model (CMM) niveles dos y tres.”
Tesis Licenciatura. Ingeniería en Sistemas Computacionales. Departamento de
Ingeniería en Sistemas Computacionales, Escuela de Ingeniería, Universidad de las
Américas-Puebla. Por presentarse en Mayo 2004.
[Olson, 2003].
Olson, Timothy G. “Staged or Continuous: Which Model Should I Choose?” Quality
Improvement Consultants, Inc. 2003.
[Paulk, 1994].
Paulk, Mark C. “A Comparison of ISO 9001 and the Capability Maturity Model for
Software,” Tech. Report CMU/SEI-94-TR-2, Software Eng.Inst., Pittsburgh, July
1994.
[Phillips, 2003].
Phillips, Mike. “CMMI V. 1.1 Tutorial.” The Software Engineering Institute. April,
2003.
[Powers, 2001].
Powers, Lori C. “Proecess Improvement.” OnLine, May 2001. Disponible en:
http://www.lcpowers.com/pitentips.htm
[Presman, 2002].
Presman, R. S. Ingeniería del Software, Un Enfoque Práctico. Mc Graw Hill, Quinta
Edición, 2002.
[Raynus, 1999].
Raynus, Joseph. Software Process Improvement With CMM. Artech House, 1999.
[Royce, 2002].
Royce, Walker. “CMM vs. CMMI: From Conventional to Modern Software
Management.” Rational Software, 2002.
Bibliografía
[SEI-1, 2002].
The Software Engineering Institute (SEI-1). “CMMISM for Systems
Engineering/Software Engineering, Version 1.1, Continuous Representation (CMMISE/SW, V1.1, Continuous).”
Disponible en: http://www.sei.cmu.edu/publications/documents/02.reports/02tr001.html
[SEI-2, 2002].
The Software Engineering Institute (SEI-2). “CMMISM for Systems
Engineering/Software Engineering, Version 1.1, Staged Representation (CMMISE/SW, V1.1, Staged).”
Disponible en: http://www.sei.cmu.edu/publications/documents/02.reports/02tr002.html
[SEI-3, 2002].
The Software Engineering Institute. “Standard CMMI® Appraisal Method for
Process Improvement (SCAMPISM), Version 1.1: Method Definition Document.”
Disponible en:
http://www.sei.cmu.edu/publications/documents/01.reports/01hb001.html
[SEI-4, 2003].
The Software Engineering Institute. CMMI Official Page. Disponible en:
http://www.sei.cmu.edu/cmmi/ Consultada el: 27 Agosto 2003.