210G/210G LC

210G/210G LC
21 562–22 910 kg (47,494–50,463 lb.) Operating Weight
Cover all the angles.
2
3
Heavier and stronger than their popular predecessors, the 210G and 210G LC are also more
productive. So, whether you use them to excavate footings, load trucks, set stone, place
pipe, or whatever, you’ll get more done per gallon of fuel. What’s more, they’re loaded with
customer-inspired refinements such as more comfortable and spacious cabs. Enhanced LCD
monitors with simplified navigation that lets an operator easily dial-in a wealth of machine info
and functionality. Exceptional power, smoothness, and operating ease — the highly 210G and
210G LC cover all the angles so you can, too.
Both the standard-undercarriage 210G and long-undercarriage
210G LC pack plenty of ability into highly versatile and easy-totransport packages.
Highly efficient hydraulically driven fans run only as fast as needed,
reducing noise, fuel consumption, and operating costs. Reversing
option automatically back-blows cooler cores to keep them clean.
210G
210G LC
Net rated power
119 kW (159 hp)
119 kW (159 hp)
Operating weight
21 562 kg (47,494 lb.)
22 910 kg (50,463 lb.)
Maximum digging depth
6.68 m (21 ft. 11 in.)
6.68 m (21 ft. 11 in.)
Arm digging force
114 kN (25,543 lb.)
114 kN (25,543 lb.)
Bucket digging force
156 kN (35,138 lb.)
156 kN (35,138 lb.)
With John Deere WorkSight™, JDLink™ monitoring provides realtime machine utilization and health data, plus location information.
Machine-health prognostics proactively suggest maintenance to
correct problems early before they turn into costly downtime. And
remote diagnostics and programming enable your dealer to read
diagnostic codes, and record performance data without a trip
to the jobsite. It’s the most comprehensive, easy-to-use suite of
technology available for increasing uptime and productivity while
lowering operating costs. And it’s only available from John Deere.
Unearth more work.
With more arm digging force, bucket breakout force, and lift
capacity, 210G and 210G LC are impressive performers. But even
with all of their extra muscle, their no-compromise Powerwise™ III
hydraulic management system yields the fuel efficiency, pinpoint
metering, and smooth-as-silk low-effort control that have become
trademarks of our excavators. And if you’re looking to put even more
work within reach, add any of the many options and attachments
that increase machine capability and expand your profit potential.
Additional hydraulic capability a necessity?
Two factory-installed high-pressure, high-flow
auxiliary packages enable you to meet the need.
4
5
Changing hydraulic flow is pushbutton easy right from the seat.
Accommodates a wide assortment of attachment needs.
Choose from a variety of track widths, arm lengths, buckets,
and other options.
Powerwise III perfectly balances engine performance and
hydraulic flow for predictable operation. Three productivity
modes allow you to choose the digging style that fits the job.
High productivity delivers more power and faster hydraulic
response to move more material. Power maximizes fuel economy
while balancing horsepower and speed for normal operation.
Economy helps conserve fuel as it reduces top speed.
1. For work that requires extra finesse, shortthrow low-effort controls, unmatched
metering, and smooth multi-function
operation give you the precision you need.
1
2. Generous hydraulic flow and ample swing
torque help speed cycles, so you can keep
trucks rolling and excavate efficiently.
2
3. When the digging gets tough, simply
press the power-boost button on the
right-hand control and muscle through.
3
Get unsurpassed
operating ease.
6
7
Now it’s easier than ever for your operators to be even more producitve. The refined monitor
employs a rotary control that makes it quick and easy to tap into an abundance of performance
and convenience functions and features. Operators will also appreciate the comfortable
fabric-covered high-back seat and increased legroom in the spacious, well-appointed cab. As
always, unsurpassed all-round visibility, low-effort joysticks, a highly efficient HVAC system,
and numerous other amenities provide everything your operators need to do their best work.
1
With large self-cleaning steps and wide
entryways, getting in and out of an excavator
has never been easier.
Spacious cab is comfortable and noticeably
quiet. Silicone-filled mounts effectively
isolate operators from noise and vibration.
We’ve got your back with a sculpted
mechanical-suspension high-back seat.
Seat has 318 mm (12½ in.) of travel, sliding
together or independent of the joystick
console. So it won’t cramp an operator’s
style. For even more support and comfort,
opt for the air-suspension heated seat.
Ergonomically correct short-throw pilot
levers provide smooth, predictable fingertip
control with less movement or effort. Push
buttons in the right lever allow fingertip
control of auxiliary hydraulic flow for
operating attachments.
No shortage of storage in here. There’s a
place for a cooler, cup holders, and even a
hot/cold box that keeps beverages at just
the right temperature.
2
Available boom and cab lights illuminate
the way when your workday extends
beyond daylight hours (left-side boom
light is standard).
1. Multi-language LCD monitor and rotary
dial provide intuitive access to a wealth
of information and functions. Just turn and
tap to select attachments, access operating
info, check maintenance intervals, source
diagnostic codes, adjust cab temperature,
and tune the radio. Plus much more.
2. Wide expanse of front and side glass,
narrow front cab posts, large overhead
glass, and numerous mirrors provide
virtually unobstructed all-around visibility.
If you need to see more, choose the
optional camera that displays the action
behind on the monitor.
3. Automatic, high-velocity bi-level climatecontrol system with automotive-style
adjustable louvers helps keep the glass
clear and the cab comfortable.
3
Nothing runs like
a Deere, because
nothing is built
like one.
8
9
Unlike some excavators that scream for attention, the hydraulically
driven-on-demand fans in our G-Series run only as fast as needed. For
reduced noise and fuel consumption. Their highly efficient cooling
systems keep things running cool, even in high-trash environments
and high altitudes. You’ll also continue to profit from traditional
durability-enhancing “extras” such as tungsten-carbide thermalcoated arm surfaces, oil-impregnated bushings, and welded-boom
bulkheads. For maximum uptime and long-term durability. When
you know how they’re built, you’ll run a Deere.
1. Reinforced D-channel side
frames provide maximum cab
and component protection.
1
Reinforced resin thrust plates, grooved
bushings, and thermal-coated bucket
joints increase arm and boom lube
intervals to 500 hours.
Oil-impregnated bushings enhance
durability and extend grease intervals
to 500 hours for the arm-and-boom joint
and 100 hours for the bucket joint.
Tungsten-carbide coating creates an
extremely wear-resistant surface to protect
the all-important bucket-to-arm joint.
2. With large idlers, rollers, and strutted links,
the sealed and lubricated undercarriage
delivers long and reliable performance.
2
A John Deere exclusive, three welded
bulkheads within the boom resist torsional
stress for unsurpassed durability. Booms,
arms, and mainframes are so tough, they’re
warranted for three years or 10,000 hours.
Thick-plate single-sheet mainframe, boxsection track frames, and industry-exclusive
double-seal swing bearing deliver rocksolid durability.
Wet-sleeve cylinder liners, mono-steel
pistons, and large-diameter connecting
rods ensure long-term engine durability.
4. TK-Series bucket teeth are engineered
for maximum strength and impact
absorption. Hammer-free installation
and removal simplifies changes, minimizes downtime.
3. H
ighly efficient, heavy-duty cooling
system keeps things cool, even in tough
environments or high altitudes.
3
4
Uncover all the ways
we keep costs down.
Like all John Deere machines, the G-Series Excavators are loaded
with features that make them hassle-free to service and low-cost
to maintain. Large, easy-to-open doors and easy-access service
points make quick work of the daily routine. Remote-mounted vertical
oil and fuel filters and extended engine and hydraulic oil-change
intervals minimize maintenance, too. Plus the Machine Information
Center (MIC), state-of-the-art LCD color monitor, and fluid-sample
ports help you make timely decisions about machine upkeep — and
manage uptime and costs.
Auto-idle automatically reduces
engine speed when hydraulics
aren’t in use. Auto-shutdown
further preserves precious fuel.
Centralized lubrication banks place
difficult-to-lube zerks within easy reach.
They make greasing less messy and time
consuming, too.
Optional reversing fan back-blows
cooler cores to reduce debris buildup.
It’s a welcome addition that helps
increase uptime.
Machine Information Center captures
and stores vital machine performance and
utilization data to help improve uptime.
Large fuel tanks and 500- and 5,000hour engine and hydraulic oil-service
intervals decrease downtime for
routine maintenance.
1
10
11
Fluid-level sight gauges are conveniently
located and can be checked at a glance.
Convenient color-coded lubrication
and maintenance chart helps ensure
that nothing gets overlooked.
2
3
1. Easy-to-read LCD monitor tracks
scheduled maintenance intervals
and issues reminders. Should
a problem arise, it provides
diagnostic information to help
decrease downtime.
2. Convenient fluid-sample and
diagnostic test ports help speed
preventative maintenance and
defeat downtime.
3. Vertical spin-on fuel and engine oil
filters are positioned in the right
rear compartment for simplified
ground-level servicing.
4. Fresh-air cab filter is quickly
serviced from outside the cab
where it’s more likely to get done.
5. Easy-to-reach dipstick and nearby
coolant reservoir make daily checks
and/or additions quick and easy.
6. Perforations in the side shields act
as a “first filter.” Anything that
passes through will also clear the
10-fin-per-inch cooler cores.
4
5
6
210G / 210G LC
Engine
Manufacturer and Model
Non-Road Emission Standard
Net Rated Power (ISO 9249)
Cylinders
Displacement
Off-Level Capacity
Aspiration
210G / 210G LC
John Deere PowerTech™ Plus 6.8 L
EPA Tier 3/EU Stage IIIA
119 kW (159 hp) at 2,000 rpm
6
6.8 L (415 cu. in.)
70% (35 deg.)
Turbocharged, air-to-air charge-air
cooler
John Deere PowerTech™ 6.8 L
EPA Tier 2/EU Stage II
119 kW (159 hp) at 2,000 rpm
6
6.8 L (415 cu. in.)
70% (35 deg.)
Turbocharged, air-to-air charge-air
cooler
Cooling
Cool-on-demand hydraulic-driven, suction-type fan with remote-mounted drive
Powertrain
2-speed propel with automatic shift
Maximum Travel Speed
Low
3.5 km/h (2.2 mph)
High
5.5 km/h (3.4 mph)
Drawbar Pull
20 693 kg (45,620 lb.)
Hydraulics
Open center, load sensing
Main Pumps
2 variable-displacement axial-piston pumps
Maximum Rated Flow
212 L/m (56 gpm) x 2
Pilot Pump
One gear
Maximum Rated Flow
30.0 L/m (7.9 gpm)
Pressure Setting
3999 kPa (580 psi)
System Operating Pressure
Circuits
Implement
34 336 kPa (4,980 psi)
Travel
34 336 kPa (4,980 psi)
Swing
34 336 kPa (4,980 psi)
Power Boost
38 000 kPa (5,511 psi)
Controls
Pilot levers, short stroke, low-effort hydraulic pilot controls with shutoff lever
Cylinders
Bore
Rod Diameter
Stroke
Boom (2)
120 mm (4.72 in.)
85 mm (3.35 in.)
1260 mm (49.61 in.)
Arm (1)
135 mm (5.31 in.)
95 mm (3.74 in.)
1475 mm (58.07 in.)
Bucket (1)
115 mm (4.53 in.)
80 mm (3.15 in.)
1060 mm (41.73 in.)
Electrical
Number of Batteries (12 volt)
2
Battery Capacity
1,400 CCA
Alternator Rating
100 amp
Work Lights
2 halogen (one mounted on boom, one on frame)
Undercarriage
210G
210G LC
Rollers (each side)
Carrier
2
2
Track
7
8
Shoes, Triple Semi-Grousers (each side) 46
49
Track
Adjustment
Hydraulic
Hydraulic
Guides
Center
Center
Chain
Sealed and lubricated
Sealed and lubricated
Ground Pressure
Triple Semi-Grouser Shoes
600 mm (24 in.)
45.0 kPa (6.53 psi)
47.9 kPa (6.95 psi)
700 mm (28 in.)
39.0 kPa (5.66 psi)
41.7 kPa (6.05 psi)
800 mm (32 in.)
34.0 kPa (4.93 psi)
36.9 kPa (5.35 psi)
12
13
CENTERLINE OF SWING
Swing Mechanism
210G / 210G LC
Speed
13.3 rpm
Torque
68 900 Nm (50,662 lb.-ft.)
Serviceability
Refill Capacities
Fuel Tank
403 L (106.5 gal.)
Cooling System
30.5 L (32.2 qt.)
Engine Oil with Filter
20.8 L (22 qt.)
Hydraulic Tank
135 L (35.7 gal.)
Hydraulic System
240 L (63.4 gal.)
Gearbox
Swing
6.2 L (6.6 qt.)
Propel (each)
7.8 L (8.2 qt.)
Pump Drive
1.0 L (1.1 qt.)
Operating Weights
210G
210G LC
With full fuel tank; 79-kg (175 lb.) operator; 1065-mm (42 in.), 0.91-m3 (1.19 cu. yd.), 886-kg (1,951 lb.) general-purpose bucket; and 4250-kg (9,370 lb.) counterweight
Operating Weight
2.91-m (9 ft. 7 in.) Arm and 800-mm
22 309 kg (49,139 lb.)
22 910 kg (50,463 lb.)
(32 in.) Triple Semi-Grouser Shoes
2.42-m (7 ft. 11 in.) Arm and 600-mm 21 562 kg (47,494 lb.)
22 163 kg (48,817 lb.)
(24 in.) Triple Semi-Grouser Shoes
Component Weights
Undercarriage with Triple Semi Grouser Shoes
600 mm (24 in.)
6752 kg (14,873 lb.)
7353 kg (16,196 lb.)
700 mm (28 in.)
7143 kg (15,733 lb.)
7743 kg (17,055 lb.)
800 mm (32 in.)
7437 kg (16,381 lb.)
8038 kg (17,705 lb.)
One-Piece Boom (with arm cylinder)
1732 kg (3,815 lb.)
1732 kg (3,815 lb.)
Arm with Bucket Cylinder and Linkage
2.22 m (7 ft. 3 in.)
928 kg (2,044 lb.)
928 kg (2,044 lb.)
2.91 m (9 ft. 7 in.)
990 kg (2,181 lb.)
990 kg (2,181 lb.)
Boom-Lift Cylinders (2), Total Weight 341 kg (751 lb.)
341 kg (751 lb.)
Operating Dimensions
210G / 210G LC
Arm Length
2.42 m (7 ft. 11 in.)
2.91m (9 ft.7 in.)
Arm Digging Force
SAE
133 kN (29,959 lb.)
110 kN (24,773 lb.)
E
ISO
139 kN (31,355 lb.)
114 kN (25,543 lb.)
Bucket Digging Force
SAE
142 kN (31,865 lb.)
142 kN (31,865 lb.)
ISO
156 kN (35,138 lb.)
156 kN (35,138 lb.)
A
Maximum Reach
9.43 m (30 ft. 11 in.)
9.92 m (32 ft. 7 in.)
C D
A| Maximum Reach at Ground Level
9.25 m (30 ft. 4 in.)
9.75 m (32 ft. 0 in.)
B
Maximum Digging Depth
6.18 m (20 ft. 3 in.)
6.68 m (21 ft. 11 in.)
B| Maximum Digging Depth at 2.44-m 5.95 m (19 ft. 6 in.)
6.50 m (21 ft. 4 in.)
(8 ft. 0 in.) Flat Bottom
C
Maximum Cutting Height
9.67 m (31 ft. 9 in.)
10.04 m (32 ft. 11 in.)
D
Maximum Dumping Height
6.83 m (22 ft. 5 in.)
7.18 m (23 ft. 7 in.)
GROUND LINE
E
Minimum Swing Radius
3.28 m (10 ft. 9 in.)
3.18 m (10 ft. 5 in.)
A’
F
Maximum Vertical Wall
5.30 m (17 ft. 5 in.)
5.99 m (19 ft. 8 in)
B B’
F
A
Machine Dimensions
A Overall Length with Arm
2.42 m (7 ft. 11 in.)
2.91 m (9 ft. 7 in.)
B Overall Height with Arm
2.42 m (7 ft. 11 in.)
2.91 m (9 ft. 7 in.)
C Rear-End Length/Swing Radius
D Distance Between Idler/Sprocket Centerline
E Undercarriage Length
F Counterweight Clearance
G Upperstructure Width
H Cab Height
I Track Width with Triple Semi-Grouser Shoes
J Gauge Width
K Ground Clearance
L Overall Width with Triple Semi-Grouser Shoes
600 mm (24 in.)
700 mm (28 in.)
800 mm (32 in.)
210G
210G LC
9.75 m (32 ft. 0 in.)
9.53 m (31 ft. 3 in.)
9.75 m (32 ft. 0 in.)
9.53 m (31 ft. 3 in.)
3.18 m (10 ft. 5 in.)
3.01 m (9 ft. 11 in.)
2.89 m (9 ft. 6 in.)
3.35 m (11 ft. 0 in.)
4.17 m (13 ft. 8 in.)
1030 mm (3 ft. 5 in.)
2.71 m (8 ft. 11 in.)
2.95 m (9 ft. 8 in.)
600 mm (24 in.) / 700 mm (28 in.) / 800 mm (32 in.)
2.22 m (7 ft. 3 in.)
450 mm (17.72 in.)
3.18 m (10 ft. 5 in.)
3.01 m (9 ft. 11 in.)
2.89 m (9 ft. 6 in.)
3.67 m (12 ft. 0 in.)
4.46 m (14 ft. 8 in.)
1030 mm (3 ft. 5 in.)
2.71 m (8 ft. 11 in.)
2.95 m (9 ft. 8 in.)
600 mm (24 in.) / 700 mm (28 in.) / 800 mm (32 in.)
2.39 m (7 ft. 10 in.)
450 mm (17.72 in.)
2.82 m (9 ft. 3 in.)
2.92 m (9 ft. 7 in.)
3.02 m (9 ft. 11 in.)
2.99 m (9 ft. 10 in.)
3.09 m (10 ft. 2 in.)
3.19 m (10 ft. 6 in.)
G
C
F
B
H
K
J
L
D
E
I
A
210G Lift Capacities
Boldface type indicates hydraulically limited capacity; lightface type indicates stability-limited capacities, in kg (lb.). Ratings at bucket lift hook; machine equipped
with 666-kg (1,468 lb.) bucket, standard counterweight, and standard gauge; and situated on firm, level, uniform supporting surface. Total load includes weight of
cables, hook, etc. Figures do not exceed 87 percent of hydraulic capacities or 75 percent of weight needed to tip machine. All lift capacities are based on ISO 10567
(with power boost).
Load Point Height
1.5 m (5 ft.)
3.0 m (10 ft.)
4.5 m (15 ft.)
6.0 m (20 ft.)
7.5 m (25 ft.)
Horizontal Distance
from Centerline of
Rotation
Over Front
Over Side
Over Front
Over Side
Over Front
Over Side
Over Front
Over Side
Over Front
Over Side
With 2.91-m (9 ft. 7 in.) arm and 700-mm (28 in.) triple semi-grouser shoes
6.0 m (20 ft.)
4700
4450
(10,300)
(9,500)
4.5 m (15 ft.)
6150
6150
5250
4300
4500
2850
(13,250)
(13,250)
(11,450)
(9,250)
(9,600)
(6,150)
3.0 m (10 ft.)
8050
6400
6150
4050
4400
2800
(17,350)
(13,800)
(13,350)
(8,750)
(9,450)
(5,950)
1.5 m (5 ft.)
9800
5950
6150
3850
4300
2700
(21,100)
(12,800)
(13,200)
(8,250)
(9,200)
(5,750)
Ground Line
4150
4150
9500
5650
5950
3700
4200
2600
(9,650)
(9,650)
(20,400)
(12,200)
(12,800)
(7,900)
(9,000)
(5,600)
–1.5 m (–5 ft.)
4800
4800
8400
8400
9400
5600
5850
3600
4150
2550
(10,750)
(10,750)
(19,100)
(19,100)
(20,200)
(12,050)
(12,650)
(7,750)
(8,950)
(5,550)
–3.0 m (–10 ft.)
9250
9250
13 950
11 150
9500
5650
5900
3650
(20,850)
(20,850)
(30,250)
(23,950)
(20,350)
(12,150)
(12,750)
(7,850)
–4.5 m (–15 ft.)
10 850
10 850
7650
5850
(23,150)
(23,150)
(16,250)
(12,650)
14
15
Buckets
210G / 210G LC
A full line of buckets is offered to meet a wide variety of applications. Digging forces are with power boost. Buckets are equipped with John Deere TK-Series Bucket
Teeth standard. Replaceable cutting edges and a variety of teeth are available through John Deere Parts. Optional side cutters add 150 mm (6 in.) to bucket widths.
Capacities are SAE heaped ratings.
Arm Dig Force
Arm Dig Force
Bucket
Number
Type Bucket
Bucket Width Bucket Capacity Bucket Weight Bucket Dig Force 2.42 m (7 ft. 11 in.) 2.91 m (9 ft. 7 in.)
Tip Radius
of Teeth
mm
in.
m3
cu. yd.
kg
lb.
kN
lb.
kN
lb.
kN
lb.
mm
in.
Heavy Duty
915
36
0.69
0.90
708
1,559
135.9
30,554
130.2
29,271
107.1
24,071 1463 57.61
5
1065
42
0.83
1.09
786
1,731
135.9
30,554
130.2
29,271
107.1
24,071 1463 57.61
5
1220
48
0.99
1.29
872
1,921
135.9
30,554
130.2
29,271
107.1
24,071 1463 57.61
6
Heavy Duty
High Capacity
610
24
0.43
0.56
646
1,424
135.0
30,349
129.9
29,197
106.8
24,016 1473 58.00
4
760
30
0.58
0.76
723
1,593
135.0
30,349
129.9
29,197
106.8
24,016 1473 58.00
4
915
36
0.74
0.97
809
1,782
135.0
30,349
129.9
29,197
106.8
24,016 1473 58.00
5
1065
42
0.91
1.19
886
1,951
135.0
30,349
129.9
29,197
106.8
24,016 1473 58.00
5
1219
48
1.18
1.54
1,112 2,450
157.2
35,332
132.7
29,840
109.8
24,685 1479 58.22
6
Bucket Selection Guide*
BUCKET SIZE m3 (cu. yd.)
2.7
(3.5)
2.3
(3.0)
1.9
(2.5)
Deere 2.42-m (7 ft. 11 in.) Arm
1.5
(2.0)
Deere 2.91-m (9 ft. 7 in.) Arm
1.0
(1.5)
0.8
(1.0)
1800
1900
3,400
2000
3,600
2100
Wet Sand, Gravel
Moist Sand
1700
Wet Clay, Granite
1600
3,200
3,000
Wet Sand
2,800
Wet Earth
1500
Limestone
1400
Dry Clay
Shale
1300
2,600
2,400
Dry Sand
2,200
Caliche
Coal
Topsoil
Wet Peat
lb./cu. yd. 1,200 1,400 1,600 1,800 2,000
kg/m3 700 800 900 1000 1100 1200
* Contact your John Deere dealer for optimum bucket and attachment selections. These recommendations are for general conditions and average use. Does not include
optional equipment such as thumbs or couplers. Larger buckets may be possible when using light materials, for flat and level operations, less compacted materials, and
volume loading applications such as mass-excavation applications in ideal conditions. Smaller buckets are recommended for adverse conditions such as off-level applications, rocks, and uneven surfaces. Bucket capacity indicated is SAE heaped.
210G Lift Capacities (continued)
Boldface type indicates hydraulically limited capacity; lightface type indicates stability-limited capacities, in kg (lb.). Ratings at bucket lift hook; machine equipped
with 666-kg (1,468 lb.) bucket, standard counterweight, and standard gauge; and situated on firm, level, uniform supporting surface. Total load includes weight of
cables, hook, etc. Figures do not exceed 87 percent of hydraulic capacities or 75 percent of weight needed to tip machine. All lift capacities are based on ISO 10567
(with power boost).
Load Point Height
1.5 m (5 ft.)
3.0 m (10 ft.)
4.5 m (15 ft.)
6.0 m (20 ft.)
7.5 m (25 ft.)
Horizontal Distance
from Centerline of
Rotation
Over Front
Over Side
Over Front
Over Side
Over Front
Over Side
Over Front
Over Side
Over Front
Over Side
With 2.91-m (9 ft. 7 in.) arm and 800-mm (32 in.) triple semi-grouser shoes
6.0 m (20 ft.)
4700
4500
(10,300)
(9,650)
4.5 m (15 ft.)
6150
6150
5250
4350
4600
2950
(13,250)
(13,250)
(11,450)
(9,400)
(9,800)
(6,250)
3.0 m (10 ft.)
8050
6500
6150
4150
4500
2850
(17,350)
(14,050)
(13,350)
(8,950)
(9,650)
(6,100)
1.5 m (5 ft.)
9800
6050
6250
3900
4350
2750
(21,100)
(13,000)
(13,450)
(8,450)
(9,400)
(5,850)
Ground Line
4150
4150
9700
5750
6050
3750
4300
2650
(9,650)
(9,650)
(20,800)
(12,450)
(13,050)
(8,050)
(9,200)
(5,700)
–1.5 m (–5 ft.)
4800
4800
8400
8400
9600
5700
6000
3700
4250
2650
(10,750)
(10,750)
(19,100)
(19,100)
(20,600)
(12,250)
(12,900)
(7,900)
(9,150)
(5,650)
–3.0 m (–10 ft.)
9250
9250
13 950
11 350
9650
5750
6050
3700
(20,850)
(20,850)
(30,250)
(24,350)
(20,750)
(12,400)
(13,000)
(8,000)
–4.5 m (–15 ft.)
10 850
10 850
7650
5950
(23,150)
(23,150)
(16,250)
(12,850)
210G LC Lift Capacities
Boldface type indicates hydraulically limited capacity; lightface type indicates stability-limited capacities, in kg (lb.). Ratings at bucket lift hook; machine equipped
with 666-kg (1,468 lb.) bucket, standard counterweight, and standard gauge; and situated on firm, level, uniform supporting surface. Total load includes weight of
cables, hook, etc. Figures do not exceed 87 percent of hydraulic capacities or 75 percent of weight needed to tip machine. All lift capacities are based on ISO 10567
(with power boost).
Load Point Height
1.5 m (5 ft.)
3.0 m (10 ft.)
4.5 m (15 ft.)
6.0 m (20 ft.)
7.5 m (25 ft.)
Horizontal Distance
from Centerline of
Rotation
Over Front
Over Side
Over Front
Over Side
Over Front
Over Side
Over Front
Over Side
Over Front
Over Side
With 2.42-m (7 ft. 11 in.) arm and 800-mm (32 in.) triple semi-grouser shoes
6.0 m (20 ft.)
5200
4950
(11,450)
(10,600)
4.5 m (15 ft.)
6850
6850
5750
4850
(20,650)
(20,650)
(14,800)
(14,800)
(12,450)
(10,400)
3.0 m (10 ft.)
8750
7200
6550
4600
5150
3200
(18,800)
(15,550)
(14,150)
(9,950)
(11,000)
(6,850)
1.5 m (5 ft.)
10 250
6750
7200
4400
5050
3100
(22,100)
(14,550)
(15,450)
(9,500)
(10,800)
(6,700)
Ground Line
10 750
6550
7050
4250
4950
3050
(23,300)
(14,150)
(15,100)
(9,200)
(10,650)
(6,550)
–1.5 m (–5 ft.)
9150
9150
10 450
6550
7000
4250
(21,050)
(21,050)
(22,600)
(14,100)
(15,050)
(9,100)
–3.0 m (–10 ft.)
12 800
12 800
9250
6650
6650
4300
(27,750)
(27,750)
(20,000)
(14,300)
(14,200)
(9,300)
–4.5 m (–15 ft.)
6400
6400
(13,250)
(13,250)
16
17
210G LC Lift Capacities (continued)
Boldface type indicates hydraulically limited capacity; lightface type indicates stability-limited capacities, in kg (lb.). Ratings at bucket lift hook; machine equipped
with 666-kg (1,468 lb.) bucket, standard counterweight, and standard gauge; and situated on firm, level, uniform supporting surface. Total load includes weight of
cables, hook, etc. Figures do not exceed 87 percent of hydraulic capacities or 75 percent of weight needed to tip machine. All lift capacities are based on ISO 10567
(with power boost).
Load Point Height
1.5 m (5 ft.)
3.0 m (10 ft.)
4.5 m (15 ft.)
6.0 m (20 ft.)
7.5 m (25 ft.)
Horizontal Distance
from Centerline of
Rotation
Over Front
Over Side
Over Front
Over Side
Over Front
Over Side
Over Front
Over Side
Over Front
Over Side
With 2.91-m (9 ft. 7 in.) arm and 600-mm (24 in.) triple semi-grouser shoes
6.0 m (20 ft.)
4700
4700
(10,300)
(10,300)
4.5 m (15 ft.)
6150
6150
5250
4700
4850
3150
(13,250)
(13,250)
(11,450)
(10,150)
(10,650)
(6,750)
3.0 m (10 ft.)
8050
7100
6150
4500
4950
3100
(17,350)
(15,250)
(13,350)
(9,650)
(10,600)
(6,600)
1.5 m (5 ft.)
9800
6600
6900
4250
4800
2950
(21,100)
(14,200)
(14,900)
(9,150)
(10,350)
(6,400)
Ground Line
4150
4150
10 650
6300
6750
4100
4700
2900
(9,650)
(9,650)
(23,050)
(13,600)
(14,500)
(8,800)
(10,150)
(6,200)
–1.5 m (–5 ft.)
4800
4800
8400
8400
10 600
6250
6650
4000
4700
2850
(10,750)
(10,750)
(19,100)
(19,100)
(23,000)
(13,400)
(14,300)
(8,600)
(10,100)
(6,150)
–3.0 m (–10 ft.)
9250
9250
13 950
12 700
9750
6300
6700
4050
(20,850)
(20,850)
(30,250)
(27,150)
(21,050)
(13,550)
(14,400)
(8,700)
–4.5 m (–15 ft.)
10 850
10 850
7650
6500
(23,150)
(23,150)
(16,250)
(14,050)
With 2.91-m (9 ft. 7 in.) arm and 700-mm (28 in.) triple semi-grouser shoes
6.0 m (20 ft.)
4700
4700
(10,300)
(10,300)
4.5 m (15 ft.)
6150
6150
5250
4800
4850
3250
(13,250)
(13,250)
(11,450)
(10,350)
(10,650)
(6,950)
3.0 m (10 ft.)
8050
7250
6150
4600
5050
3150
(17,350)
(15,600)
(13,350)
(9,850)
(10,850)
(6,750)
1.5 m (5 ft.)
9800
6750
7050
4350
4950
3050
(21,100)
(14,500)
(15,200)
(9,350)
(10,600)
(6,550)
Ground Line
4150
4150
10 650
6450
6900
4200
4850
2950
(9,650)
(9,650)
(23,050)
(13,900)
(14,850)
(9,000)
(10,400)
(6,350)
–1.5 m (–5 ft.)
4800
4800
8400
8400
10 600
6400
6800
4100
4800
2950
(10,750)
(10,750)
(19,100)
(19,100)
(23,000)
(13,750)
(14,650)
(8,850)
(10,350)
(6,350)
–3.0 m (–10 ft.)
9250
9250
13 950
12 950
9750
6450
6850
4150
(20,850)
(20,850)
(30,250)
(27,750)
(21,050)
(13,900)
(14,750)
(8,950)
–4.5 m (–15 ft.)
10 850
10 850
7650
6650
(23,150)
(23,150)
(16,250)
(14,350)
With 2.91-m (9 ft. 7 in.) arm and 800-mm (32 in.) triple semi-grouser shoes
6.0 m (20 ft.)
4700
4700
(10,300)
(10,300)
4.5 m (15 ft.)
6150
6150
5250
4900
4850
3300
(13,250)
(13,250)
(11,450)
(10,500)
(10,650)
(7,050)
3.0 m (10 ft.)
8050
7350
6150
4650
5150
3200
(17,350)
(15,850)
(13,350)
(10,050)
(11,050)
(6,900)
1.5 m (5 ft.)
9800
6850
7050
4450
5050
3100
(21,100)
(14,750)
(15,200)
(9,550)
(10,800)
(6,700)
Ground Line
4150
4150
10 650
6600
7050
4250
4950
3000
(9,650)
(9,650)
(23,050)
(14,150)
(15,100)
(9,150)
(10,650)
(6,500)
–1.5 m (–5 ft.)
4800
4800
8400
8400
10 600
6500
6950
4200
4900
3000
(10,750)
(10,750)
(19,100)
(19,100)
(23,000)
(14,000)
(14,950)
(9,000)
(10,600)
(6,450)
–3.0 m (–10 ft.)
9250
9250
13 950
13 200
9750
6550
7000
4200
(20,850)
(20,850)
(30,250)
(28,200)
(21,050)
(14,150)
(15,050)
(9,100)
–4.5 m (–15 ft.)
10 850
10 850
7650
6800
(23,150)
(23,150)
(16,250)
(14,600)
Additional equipment
Key: l Standard s Optional or special 210G /
210G LC
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
s
s
s
s
l
l
l
l
l
l
l
s
s
s
s
s
s
l
l
l
l
l
l
l
s
s
s
Engine
Auto-idle system
Automatic belt-tension device
Batteries (2 – 12 volt)
Coolant recovery tank
Dual-element dry-type air filter
Electronic engine control
Enclosed fan guard (conforms to SAE J1308)
Engine coolant to –37 deg. C (–34 deg. F)
Fuel filter with water separator
Full-flow oil filter
Turbocharger with charge air cooler
Cool-on-demand hydraulic-driven fan
500-hour engine-oil-change interval
70% (35 deg.) off-level capability
Engine-oil-sampling valve
Programmable auto shutdown
Chrome exhaust stack
Severe-duty fuel filter
Hydraulic fan reverser
Engine coolant heater
Hydraulic System
Reduced-drift valve for boom down, arm in
Auxiliary hydraulic valve section
Spring-applied, hydraulically released
automatic swing brake
Auxiliary hydraulic-flow adjustments
through monitor
Auto power lift
5,000-hour hydraulic-oil-change interval
Hydraulic-oil-sampling valve
Auxiliary hydraulic lines
Auxiliary pilot and electric controls
Hydraulic filter restriction indicator kit
Load-lowering control device
Single-pedal propel control
Control pattern-change valve
Undercarriage
Planetary drive with axial piston motors
Propel motor shields
Spring-applied, hydraulically released
automatic propel brake
Track guides, front idler and center
2-speed propel with automatic shift
Upper carrier rollers (2)
Sealed and lubricated track chain
Triple semi-grouser shoes, 600 mm (24 in.)
Triple semi-grouser shoes, 700 mm (28 in.)
Triple semi-grouser shoes, 800 mm (32 in.)
210G /
210G LC Upperstructure
Right-hand, left-hand, and counterweight
l
mirrors
Vandal locks with ignition key: Cab door /
l
Service doors / Toolbox
Debris screen in side panel
l
Remote-mounted engine oil and fuel filters
l
Front Attachments
Centralized lubrication system
l
Dirt seals on all bucket pins
l
Less boom and arm
l
Oil-impregnated bushings
l
Reinforced resin thrust plates
l
Tungsten carbide thermal coating on arml
to-bucket joint
Arm, 2.42 m (7 ft. 11 in.)
s
Arm, 2.91 m (9 ft. 7 in.)
s
Attachment quick-couplers
s
Boom cylinder with plumbing to mainframe
s
for less boom and arm
Buckets: Heavy duty / Heavy-duty high
s
capacity / Side cutters and teeth
Material clamps
s
Super-long fronts
s
Operator’s Station
Meets ISO 12117-2 for ROPS
l
Adjustable independent-control positions
l
(levers-to-seat, seat-to-pedals)
AM/FM radio
l
Auto climate control/air conditioner/
l
heater/pressurizer
Built-in Operator’s Manual storage coml
partment and manual
Cell-phone power outlet, 12 volt, 60 watt,
l
5 amp
Coat hook
l
Deluxe suspension cloth seat with 100-mm
l
(4 in.) adjustable armrests
Floor mat
l
Front windshield wiper with intermittent
l
speeds
Gauges (illuminated): Engine coolant / Fuel
l
Horn, electric
l
Hour meter, electric
l
Hydraulic shutoff lever, all controls
l
Hydraulic warm-up control
l
Interior light
l
Large cup holder
l
See your John Deere dealer for further information.
210G /
210G LC Operator’s Station (continued)
Machine Information Center (MIC)
l
Mode selectors (illuminated): Power modes
l
(3) / Travel modes (2 with automatic shift) /
Work mode (1)
Multifunction, color LCD monitor with:
l
Diagnostic capability / Multiple-language
capabilities / Maintenance tracking / Clock /
System monitoring with alarm features:
Auto-idle indicator, engine air cleaner
restriction indicator light, engine check,
engine coolant temperature indicator light
with audible alarm, engine oil pressure
indicator light with audible alarm, lowalternator-charge indicator light, low-fuel
indicator light, fault code alert indicator,
fuel-rate display, wiper-mode indicator,
work-lights-on indicator, and work-mode
indicator
Motion alarm with cancel switch (conforms
l
to SAE J994)
Power-boost switch on right console lever
l
Auxiliary hydraulic control switches in right
l
console lever
SAE 2-lever control pattern
l
Seat belt, 51 mm (2 in.), retractable
l
Tinted glass
l
Transparent tinted overhead hatch
l
Hot/cold beverage compartment
l
Air-suspension heated seat
s
Hydraulic oil filter restriction indicator light
s
Protection screens for cab front, rear,
s
and side
Seat belt, 76 mm (3 in.), non-retractable
s
Window vandal-protection covers
s
Electrical
100-amp alternator
l
Blade-type multi-fused circuits
l
Positive-terminal battery covers
l
JDLink™ wireless communication system
l
(available in specific countries; see your
dealer for details)
Rearview camera
s
Cab extension wiring harness
s
Lights
Work lights: Halogen / One mounted on
l
boom / One mounted on frame
2 lights mounted on cab / One mounted
s
on right side of boom
Net engine power is with standard equipment including air cleaner, exhaust system, alternator, and cooling fan, at test conditions specified per ISO 9249.
No derating is required up to 3050-m (10,000 ft.) altitude. Specifications and design subject to change without notice. Wherever applicable, specifications
are in accordance with SAE standards. Except where otherwise noted, these specifications are based on units with 1065-mm (42 in.), 0.91-m3 (1.19 cu. yd.),
886-kg (1,951 lb.) general-purpose buckets; 2.91-m (9 ft. 7 in.) arms; 4250-kg (9,370 lb.) counterweights; 800-mm (32 in.) triple semi-grouser shoes; full fuel
tanks; and 79-kg (175 lb.) operators.
DKAX210G Litho in U.S.A. (15-01)
JohnDeere.com