71-4664-00-00 - Leds-C4

RGB
71-4664-00-00
IN / OUT
CARACTERÍSTICAS TÉCNICAS
El acabado de la fotografía puede no coincidir
con el de la referencia. Para identificar el real
ver descripción del acabado.
Tipo:
ACCESORIO
Índice protección IP:
IP65
Fuente de luz 1:
9A - 24VDC - 210W
Voltaje / Frecuencia:
24 VDC
Garantía (Años):
2
Unidades por caja:
66
Peso neto (Kg):
0.27
EAN:
8435111084847
Descargar formato .ldt /.ies
MATERIALES / ACABADOS
LEDS-C4 se reserva el derecho de realizar las modificaciones técnicas oportunas con el fin de mejorar las prestaciones del
producto.
Recomendamos consultar con el equipo comercial para aclarar cualquier duda.
(+34) 973 468 100
[email protected]
www.leds-c4.com
71-4664-00-00
Controller specification
Features
Controller for RGB LED strips, 5 channel output: R,G,B,VCC1,VCC2. It works along with a 24V power supply.
Installed with 22 changing patterns, it can be used for controlling patterns and changing speeds.
The strip is separated in 25cm sections. There are odd and even sections.
Technical Parameters
◆Output current: 3 RGB channels, 1A for each; channel VCC1 and channel VCC2, 9 A for each.
◆Function description: 22 changing patterns, such as alternative color changing, gradual changing, etc.
Changing Patterns
1.Section of odd numbers and of even ones light alternatively in red color.
2.Fixed Red color.
3.Section of odd numbers and of even ones light alternatively in green color.
4.Fixed green color.
5.Section of odd numbers and of even ones light alternatively in blue color
6.Fixed blue color.
7.Section of odd numbers and of even ones light alternatively in cyan color.
8.Fixed cyan color.
9.Section of odd numbers and of even ones light alternatively in yellow color.
10.Fixed yellow color.
11.Section of odd numbers and of even ones light alternatively in purple color.
12.Fixed purple color.
13.Section of odd numbers and of even ones light alternatively in white color.
14.Fixed white color.
15.7 colors alternative changing between odd and even sections.
16.Red color sections light gradually.
17.Green color sections light gradually.
18.Blue color sections light gradually.
19.Cyan color section light gradually.
20.Yellow color section light gradually.
21.Purple color section light gradually.
22.Red color sections, Green color section and Blue color ones light gradually.
Attention
◆To avoid the burning out of the controller, the average power of the 3 RGB channels
should not be over 70W to make sure the total power is less than 210W.
◆ The output driving of this controller is constant. The voltages of the driver and the
power supply are the same. Please choose appropriate DC power supply according
to the normally usable voltage of the lights. Otherwise, the lights will be burned out.
◆ Please use DC 24V as the power supply for the controller, instead of civilian ones with high voltage.
71-4664-00-00
Remote control operation
A: Program changing / Cambio de programa
B: + speed / más velocidad
C: - speed / menos velocidad
D: ON / OFF
Accessories included