\\Server\j\INSTRUCTIONS\Vibrating roller\V

ENGINEERED SOLUTIONS
ES MANUFACTURING, INCORPORATED
SAINT PETERSBURG, FLORIDA, U.S.A.
(727) 323-4040
800-55ES-MFG
VS1250/VS750 Vibrating Roller
Documentation & Warranty Packet
Thank you for purchasing the world’s favorite
vibrating roller. If properly maintained, this roller
will provide years of trouble free service.
WARRANTY
This vibrating roller is warranted against defects for a period of 60 days. Keep your
original sales receipt for proof of purchase. ES MFG., Inc. will replace or repair any
defective part, either directly, or through the distributor, at the option of ES MFG. ES
MFG. Reserves the right to inspect the merchandise at our facility, and is not
responsible for transportation cost to ES MFG. ES MFG. Is not responsible for
damage, loss, lost production or any other expenses due to the failure of this product.
The supplied listing of nozzle suggestions are based on user comments and are no
way guaranteed. This warranty in no way guarantees the suitability of this equipment
for use with any material. No other warranty is expressed or implied.
Copyright 2004 ®
ES Manufacturing, Inc.
2647 24th St. North
St. Petersburg, FL 33713
US / Canada: 800-55ES-MFG
Local / International: 727-323- 4040
Fax: 727-327-9872
MODEL VS-750
ASSISTS POLY-VINYL CORE MATERIALS BOND THROUGH MOLECULAR
FRICTION GENERATED BY THE HIGH FREQUENCY OF THE 3/4" PISTON.
AT 12,500 CYCLES PER MINUTE, HEAT IS GENERATED, CAUSING AN
ACCELERATION IN THE CATALYZATION PROCESS. THIS REDUCES
VOIDS CAUSED BY THE DE-LAMINATION THAT HAPPENS IN
CONTOURED SURFACES.
MODEL VS-1250
THIS VIBRATOR IS USED FOR CORES ABOVE 1/2" THICKNESS AND/OR
WHEN A HEAVY VISCOSITY BONDING PUTTY IS USED. THE MODEL
1250 HAS A 1 1/4" PISTON THAT FORCES THE BONDING PUTTY INTO
THE CORE MATERIAL.
ES MANUFACTURING, INC.
"ENGINEERED SOLUTIONS"
POLY-VINYL CORE
RESIN OR PUTTY
MODEL VS-750 & VS-1250
60" RADIUS ULTRA HIGH MOLECULAR WEIGHT ROLLER HEAD APPLIES
EVEN FORCE TO THE COMPLETE 6" ROLLER SECTION. BRONZE
BUSHINGS ARE USED FOR LONG LIFE. ROLLER IS MOUNTED TO A 3/8"
STEEL SHAFT THAT CANNOT VIBRATE LOOSE. BOTH UNITS ARE AN
EXCELLENT CHOICE WHEN VACCUM BAGGING IS NOT FEASIBLE.
MODELO VS-750
ASISTE A MATERIALES DE MANTO 'POLY-VINYL' A PEGARSE POR MEDIO A FRICCIONES MOLECULARES GENERADOS POR ALTA FREQUENCIA DE UN
'PISTON' DE 3/4 PULGADA (A UN CILINDRO DE 12,500 GIRAMENTOS POR MINUTO) A 12,500 CICLOS POR MINUTO, EL CALOR ES GENERADO CAUSANDO
UNA ACELARACION EN EL PR0CESO DE CATALIZACION, ESTE REDUCE ESPACIOS VACIOS CAUSANDO POR LA DE-LAMINACION QUE SUCEDE EN LAS
SUPERFICIES CONTORNAS.
MODELO VS-1250
ESTE VIBRADOR ES USADO PARA MANTOS SOBRE 1/2 PULGADA GRUESO Y/O CUANDO UN PEGAMENTO FUERTE DE UNION DE 'PUTTY' ES USADO. EL
MODELO 1250 TIENE UN PISTON DE 1 PULGADA Y 1/4 QUE FORZA LA UNION DEL PUTTY' DENTRO DEL MANTO 'POLY-VINYL'.
MODELOS VS-750 Y VS-1250
LA CABEZA DEL ROLO DE UN RADIO DE 60" DE ALTO PESO ULTRA MOLECULAR APLICA UNA FUERZA A NIVEL DE LA SECCION COMPLETE DEL ROLO DE 6
PULGADA. BROCHOZOS DE BRONCES SON USADOS PARA LA DURABILIDAD. EL ROLO ES MONTADO A UNA PULGADA DE 3/8 ASTA DE ACERO QUE NO SE
SOLTARA POR LA VIBRACION. AMDOS UNIDADES SON UNA EXELENTE ELECCION CUANDO BOLSAS DE ASPIRADOROS NO SON ASECIBLES.
SOLUCIONES de INGENIERO A FABRICACION
ENGINEERED SOLUTIONS TO MANUFACTURING - ES MANUFACTURING, INC. 2647 24th STREET NORTH, ST. PETERSBURG, FL. U.S.A. 33713
ES MANUFACTURING, INC.
"ENGINEERED SOLUTIONS"
MODEL VS-750
ASSISTS POLY-VINYL CORE MATERIALS BOND THROUGH MOLECULAR
FRICTION GENERATED BY THE HIGH FREQUENCY OF THE 3/4" PISTON.
AT 12,500 CYCLES PER MINUTE, HEAT IS GENERATED, CAUSING AN
ACCELERATION IN THE CATALYZATION PROCESS. THIS REDUCES
VOIDS CAUSED BY THE DE-LAMINATION THAT HAPPENS IN
CONTOURED SURFACES.
MODEL VS-1250
THIS VIBRATOR IS USED FOR CORES ABOVE 1/2" THICKNESS AND/OR
WHEN A HEAVY VISCOSITY BONDING PUTTY IS USED. THE MODEL
1250 HAS A 1 1/4" PISTON THAT FORCES THE BONDING PUTTY INTO
THE CORE MATERIAL.
MODEL VS-750 & VS-1250
60" RADIUS ULTRA HIGH MOLECULAR WEIGHT ROLLER HEAD APPLIES
EVEN FORCE TO THE COMPLETE 6" ROLLER SECTION. BRONZE
BUSHINGS ARE USED FOR LONG LIFE. ROLLER IS MOUNTED TO A 3/8"
STEEL SHAFT THAT CANNOT VIBRATE LOOSE. BOTH UNITS ARE AN
EXCELLENT CHOICE WHEN VACCUM BAGGING IS NOT FEASIBLE.
RESIN OR PUTTY
POLY-VINYL CORE
ENGINEERED SOLUTIONS TO MANUFACTURING - ES MANUFACTURING, INC. 2647 24th St. North, ST. PETERSBURG, FL. U.S.A. 33713
ES MANUFACTURING, INC.
"ENGINEERED SOLUTIONS"
MODELO VS-750
ASISTE A MATERIALES DE MANTO 'POLY-VINYL' A PEGARSE POR MEDIO A
FRICCIONES MOLECULARES GENERADOS POR ALTA FREQUENCIA DE UN 'PISTON'
DE 3/4 PULGADA (A UN CILINDRO DE 12,500 GIRAMENTOS POR MINUTO) A 12,500
CICLOS POR MINUTO, EL CALOR ES GENERADO CAUSANDO UNA ACELARACION
EN EL PR0CESO DE CATALIZACION, ESTE REDUCE ESPACIOS VACIOS CAUSANDO
POR LA DE-LAMINACION QUE SUCEDE EN LAS SUPERFICIES CONTORNAS.
MODELO VS-1250
ESTE VIBRADOR ES USADO PARA MANTOS SOBRE 1/2 PULGADA GRUESO Y/O
CUANDO UN PEGAMENTO FUERTE DE UNION DE 'PUTTY' ES USADO. EL MODELO
1250 TIENE UN PISTON DE 1 PULGADA Y 1/4 QUE FORZA LA UNION DEL PUTTY'
DENTRO DEL MANTO 'POLY-VINYL'.
MODELOS VS-750 Y VS-1250
LA CABEZA DEL ROLO DE UN RADIO DE 60" DE ALTO PESO ULTRA MOLECULAR
APLICA UNA FUERZA A NIVEL DE LA SECCION COMPLETE DEL ROLO DE 6
PULGADA. BROCHOZOS DE BRONCES SON USADOS PARA LA DURABILIDAD. EL
ROLO ES MONTADO A UNA PULGADA DE 3/8 ASTA DE ACERO QUE NO SE SOLTARA
POR LA VIBRACION. AMDOS UNIDADES SON UNA EXELENTE ELECCION CUANDO
BOLSAS DE ASPIRADOROS NO SON ASECIBLES.
RESIN O 'PUTTY'
MANTO 'POLY-VINYL'
SOLUCIONES de INGENIERO A FABRICACION - ES MANUFACTURING, INC. 2647 24th Street North, ST. PETERSBURG, FL. U.S.A. 33713
Please take a few
Minutes to fill out
the below warranty
sheet. It will help
us serve you better.
VS-750
VS-1250
ENGINEERED SOLUTIONS
ES MANUFACTURING, INCORPORATED
SAINT PETERSBURG, FLORIDA, U.S.A.
(727) 323-4040
800-55ES-MFG
ES MANUFACTURING, INC.
PO BOX 11692
ST. PETERSBURG, FL 33733- 1692 USA
Failure to return the
warranty sheet with a
copy of the original sales
receipt, will void
warranty.
Thomas D. Elder
President, ES Manufacturing, Inc.
FOLD HERE
If you have pictures of your products, we would like to use them at our domestic and
international trade shows.
Date of Purchase:____________________________________________________________
COMPANYNAME___________________________________________________________
STREET
ADDRESS__________________________________________________________________
CITY/STATE/ZIP_____________________________________________________________
PHONE #_____________________________
FAX #_____________________________
CONTACT__________________________________________________________________
Web site:________________________________Email Address:_______________________
PRIMARY LINE OF BUSINESS_________________________________________________
THICKNESS OF CORE MATERIAL USED________________________________________
WHAT BRAND(S) OF CORE___________________________________________________
IS THIS YOUR FIRST ES MFG. PRODUCT YES - NO
WHO DID YOU PURCHASE THIS UNIT FROM____________________________________
WHAT WAS YOUR PURCHASE PRICE__________________________________________
DID YOU PURCHASE ADDITIONAL ROLLER RADII YES - NO
IF YES, WHAT RADIUS?
45"
60"
FLAT
WHICH WAS MORE IMPORTANT IN YOUR PURCHASE
SIMPLICITY - EFFECTIVENESS - PRICE - REPUTATION
DO YOU REQUEST A FREE CATALOG YES - NO
COMMENTS
__________________________________________________________________________
__________________________________________________________________________
__________________________________________________________________________
__________________________________________________________________________
PLEASE RETURN THIS SHEET IN THE PROVIDED ENVELOPE
OR YOU MAY FAX TO (727) 327-9872
WARRANTY MUST BE FILLED OUT OR WARRANTY IS VOID