DVR and NVR Factory Default
Passwords List (2022)
December 31, 2021
in Learning & Tips
This article will list the default username and passwords of an array of security
systems. These login credentials are the ones that the recorders/cameras come out of the
manufacturing line.
If you or someone with access to your system has changed any default values, then the
default credentials would no longer apply unless the equipment in question is first
‘reset’.
DVR and NVR Default Password List
Brand Name
Username
Password
Default IP address
admin
12345
192.0.0.64
admin
admin
192.168.0.100
admin
admin
192.168.1.168
admin
No Set Password
No Default / DHCP
admin
admin
No Default / DHCP
root
no set password
No Default / DHCP
admin
admin
192.168.100.x
service
service
192.168.0.1
admin
No set password
192.168.0.1
admin
admin
192.168.1.1
3xLogic
Acti
American Dynmics
Arecont Vision
Avigilon
Axis
Basler
Bosch
Bosch Dinion
Brickcom
Brand Name
Username
Password
Default IP address
admin
admin
192.168.100.x
no default
no set password
192.168.0.100
root
admin
192.168.123.100
root
root
unknown
admin
admin
192.168.1.108
admin
1234
192.168.0.200
Admin
1234
192.168.0.250
admin
1234
192.168.0.250
admin
fliradmin
192.168.250.116
admin
leave blank
unknown
admin
admin
192.168.0.10
admin
admin
192.168.1.168
Admin
1234
192.168.0.250
admin
12345
192.0.0.64
administrator
1234
no default/DHCP
admin
admin
192.168.123.10
root
Admin or admin
192.168.1.168
CBC Ganz
Cisco
CNB
Costar
Dahua
Drs
DVTel
DynaColor
Flir
Foscam
GeoVision
Grandstream
GVI
HIKVision
Honeywell
IOImage
IPX-DDK
Brand Name
Username
Password
Default IP address
root
system
no default/DHCP
admin
Model# of camera
no default/DHCP
supervisor
supervisor
no default/DHCP
admin
12345
192.0.0.64
admin
leave blank
unknown
Camera
admin pass
No Default / DHCP
Recorder
admin / 1111
No Default / DHCP
admin
Model# of camera
192.168.1.30
admin
meinsm
No Default / DHCP
admin
12345
192.168.1.64
admin
12345
192.168.0.253
admin1
password
192.168.0.253
admin
admin
no default/DHCP
admin
admin
192.168.0.200
root
pass
192.168.0.200
admin
1234
192.168.0.250
root
4321 / admin
192.168.0.200
IQInvision
JVC
VideoIQ
LTS Security
March Networks
Merit Lilin
Merit Lilin
Messoa
Mobotix
Northern
Panasonic
Panasonic
Pelco
PiXORD
PiXORD
QVIS
Samsung
Brand Name
Username
Password
Default IP address
admin
4321 / 1111111
192.168.1.200
admin
admin
192.168.0.2
Admin
1234
192.168.0.250
admin
admin
192.168.0.100
root
root
192.168.1.7
admin
admin
192.168.1.7
admin
admin
no default/DHCP
admin
no set password
no default/DHCP
root
ikwb
192.168.0.30
admin
admin
192.168.10.1
root
unknown
unknown
ubnt
ubnt
192.168.1.20
admin
wbox / 123
192.0.0.64
root
leave blank
unknown
admin
admin
no default/DHCP
root
no set password
no default/DHCP
Samsung
Sanyo
Sentry360
Sony
Speco
Speco
StarDot
Starvedia
Toshiba
Trendnet
UDP
Ubiquiti
W-Box
Wodsee
Verint
Vivotek
Most Popular CCTV Brands
Acti default username/password
Username: Admin/admin
Password: 12345/123456
IP address: 192. 168.0.100
Arecont Vision default username/password
Arecont does not have a default password, but you can reset it to factory settings.
Follow these steps:
1.
Access the camera’s web interface by typing the IP in your web browser.
2.
Under the Administration or System tab, click on Restore to Factory Default.
3.
Once the camera reboots, all settings on the camera will be restored to factory
default.
AXIS default username/password
For an old system:
Username: Root
Password: Pass
IP address: 192.168.0.90
The new generation AXIS cameras have a resetting sequence:
1.
Remove the Ethernet cable.
2.
Press and hold the control button and insert the Ethernet cable again while
holding the control button.
3.
Hold the control button until the amber lights turn on.
4.
Then release the button.
5.
Wait for about 1 minute.
6.
When the amber lights turn into the green lights your camera is reset and your
password as well.
BOSCH default username/password
For old models:
Username: service
Password: service
IP address: 192.168.0.1
For new models:
You can reset the camera by pushing the reset button for about 7 seconds. Or you can
reset the NVR by removing the battery on the mainboard (not recommended, at your
own risk).
DAHUA default username/password
Username: admin
Password: admin
IP address: 192.168.1.108
Local Account:
Username: 888888
Password: 888888
GEOVISION default username/password
Username: admin
Password: admin
IP Address: 192.168.1.108
HIKVISION default username/password
For old models (before firmware 5.3.0):
Username: admin
Password: 12345
IP Address: 192.0.0.64
For new models, you can reset passwords via the SADP tool. Please click the link below
and follow the instructions.
LTS Security default username/password
Username: admin
Password: 12345 or 123456
IP Address: 192.0.0.64
LTS equipment is Hikvision re-branded.
Messoa default username/password
Username: admin
Password: 1234 or model number of camera or
IP address: 192.168.1.30
Mobotix default username/password
Username: admin
Password: meinsm
SAMSUNG Techwin default username/password
For old models:
Username: admin
Password: 111111 or 1111111
For new models:
Username: admin
Password: 4321
IP Address: 192.168.1.200
SONY default username/password
Username: admin
Password: admin
IP Address: 192.168.0.100
Speco default username/password
For old models:
Username: root or admin
Password: root or admin
For new models:
Username: admin
Password: 1234
IP Address: 192.168.1.7
Ubiquiti default username/password
Username: ubnt
Password: ubnt
IP Address: 192.168.1.20
Vivotek default username/password
None. You can choose your own password after setup. If you want to reset it.
1.
Press and hold down the reset button for at least 1 minute.
2.
Power on the camera until the red light flashes rapidly.
Now your camera is back to factory default without any password.
0
