SPECIFICATION FOR ZHONGZHOU LED LAMP Model No : Spec No : ZL-503YCA2 ZZ-GY-S0002B Descriptions: CUSTOMER APPOVED SIGNATURES ● 5mm Round Type ● Emitting Color: Yellow ● Viewing Angle: 30° ● Lens: Water Clear ● No Stopper SALES APPROVED APPROVED BY CHECKED BY PREPARED BY Dingmudan Landy Yehuming Jinqiaoyun : : : -1- Dimension Drawing ■ 5.80 ■ Applications: ● Toys ● Lighting ● Traffic light ● Automotive ● Commercial Outdoor Advertising ● Front Panel Indicator 8.60 1.00 1.50max 5.00 Absolute Maximum Ratings(Ta = 25℃) 25.4min ANODE CATHODE ■ Items Symbol Absolute maximum Rating Unit Forward Current( DC ) IF 50 mA Peak Forward Current* IFP 100 mA Reverse Voltage VR 5 V Power Dissipation PD 150 mW Operation Temperature Topr -20 ~ +95 ℃ Storage Temperature Tstg -40 ~ +100 ℃ 2.54 Note: 1.All dimensions in mm tolerance is ±0.2mm unless otherwise noted. 2.An epoxy meniscus may extend about 1.5mm down the leads. 3.Burr around bottom of epoxy may be 0.5mm max. Lead Soldering Tsol Temperature Max.260°C for 5 sec Max. (3mm from the base of the epoxy bulb) *pulse width ≦0.1msec duty ≦1/10 ■ Typical Electrical & Optical Characteristics ( Ta = 25℃) Items Symbol Condition Min. Typ. Max. Unit Forward Voltage VF IF = 20mA 1.8 --- 2.4 V Reverse Current IR VR = 5V --- --- 10 μΑ Dominant Wavelength λD IF = 20mA 586 --- 596 nm Luminous Intensity IV IF = 20mA 1700 --- 3500 mcd 50% Power Angle 2θ½ IF = 20mA --- 30 --- deg ■ Ranks Combination (IF = 20mA) Rank 0C 0D 0E 0F 0G 586-588 588-590 590-592 592-594 594-596 Rank 0Q 1R 2R 0S --- Luminous Intensity (mcd) 1700-2000 2000-2500 2500-3000 3000-3500 --- Dominant Wavelength (nm) Rank 0G 0H 0J 0K 0L 0M Forward Voltage(V) 1.8-1.9 1.9-2.0 2.0-2.1 2.1-2.2 2.2-2.3 2.3-2.4 Important Notes: 1) All ranks will be included per delivery. 2) Tolerance of measurement of luminous intensity is ±15%. 3) Tolerance of measurement of dominant wavelength is ±1nm. 4) Tolerance of measurement of forward voltage is ±0.05 V. 5)Pb content<1000PPM. -2- ■ Typical Electrical/ Optical Characteristics Curves (Ta=25°C Unless Otherwise Noted) Half Wide=△15nm Iv Domi WL=590nm If (mA) 1.0 100 0.8 80 0.6 60 0.4 40 0.2 20 WL(nm) 0.0 450 500 550 600 650 Vf (v) 0 1.6 700 Fig.1 Relative Luminous Intensity vs. Wavelength 1.8 2.0 2.2 2.4 2.6 Fig.2 Forward Current vs. Forward Voltage Iv If (mA) 5.0 100 4.0 80 3.0 60 2.0 40 1.0 20 If (mA) 0.0 0 20 40 60 80 100 0 Fig.3 Relative Luminous Intensity vs. Forward Current -50 -40 -30 -20 -10 Ta (℃) 0 20 40 60 80 100 Fig.4 Maximum Forward Current vs.Ambient Temperature 0 0.0 Vr(v) 2.0 -10.0 1.0 -20.0 0.5 -30.0 -40.0 0.2 -50.0 0.1 Ta (℃) -30 -20 Ir (uA) -10 0 10 20 30 40 50 60 70 Fig.6 Relative Luminous Intensity vs.Ambient Temperature Fig.5 Reverse Current vs.Reverse Voltage -3- ■ Package Specification: LABE Inside(bag) SPEC LABEL Each box A contains 12 bags Box B 50.0 Box A .5 27 22 .0 11.0 Each box B contains 8 boxes A 47.0 26.0 NOTE: 1) The LED shall be used under allowed conditions. ZhongzhouOpto. can not take any responsibility for any troubles that are caused by using the LEDs at conditions exceeding our specifications. 2) The LED must be used as soon as tore open, otherwise the plank will be oxygenated. 3)The Blue、Green、White products shall be care of the static electricity. 4)3.0mm From Body For 5 Seconds below 260℃. Please avoid the soldered LEDs from clashing or librating before the lens’ temperature cool down. 5) The circuit shall be designed according to certain current or relative operating voltage. 6) These LEDs are designed and manufactured for standard applications such as electric home appliances, communication equipment, office equipment, electronic instrumentation and so on. It is recommended to consult with ZhongzhouOpto. in advance if user’s application requires any particular quality or reliability that concerns human life. Examples would be medical equipment, aerospace applications, traffic signals, safety system equipment and so on. 7) We reserve the right to make technical changes without prior notice. 8) All the content interpretation reserved to zhongzhouOpto. -4-