Instrucciones de Instalación (7) Gracias por adquirir Aero W, el rack de tendido plegable que le brindará ahorro de espacio y practicidad de uso. rack (4) Es importante que siga las instrucciones de instalación, para asegurar el correcto funcionamiento de su producto. base de anclaje (7) (4) Atentamente, Aero W (1) (2) (3) (4) Identificar la pared en donde se va a colocar el rack de tendido plegable Aero W. Verificar que la pared sea block, madera o azulejo. En caso de tablaroca, asegurarse de usar taquetes especiales para tablaroca. Presentar el producto en la pared y marcar con lápiz la superficie en los 4 agujeros que tiene el rack de tendido plegable Aero W y retirar. Se recomienda usar un nivel. (5) Taladrar con broca 1/4” (0.635 cm) adecuada a la superficie que se va a taladrar. (6) Colocar taquetes expansores para concreto o los taquetes plásticos para block y madera (incluidos). (7) Para facilitar la instalación, se recomienda separar la parte plegable del rack de la base de anclaje con una llave allen de 3/16” (0.476 cm)*. (8) Atornillar las partes de anclaje con los tornillos incluidos y volver a unir el rack con las bases de anclaje usando la llave allen. (9) Verificar que los tornillos estén apretados y jalar el rack hasta abrirlo. (10) Se recomienda probar con algo de poco peso, para verificar que esté bien instalado. www.aero-w.com Rack de Tendido Plegable Maximiza Espacio *no incluida Instalation Instructions (7) Than you for purchasing Aero W folding clothes line rack. This practical product will save you space and provide a practical use. rack (4) It is important that you follow our instalation instructions to ensure your product works properly. anchor base (7) (4) Sincerly, Aero W (1) Identify the wall where Aero W folding clothes line rack is going to be placed. (2) Make sure the surface is block wall, wood or tile. (3) In case of dry-wall, make sure to use special drywall anchors. (4) Place the product in the exact location you want it and use a pencil to mark the surface using the 4 mounting holes as reference. We recommend you use a level tool. (5) Drill with a 1/4” bit that is adecuate for the surface that will be drilled. (6) Place the expansion wall anchors for concrete or the plastic shields for block or wood (included). (7) To make instalation easier, we recommend you separate the rack from the anchoring base with allen key (3/16” )*. (8) Screw the anchoring bases to the wall using the included screws and re-attach the rack to the anchorning part using the allen key. (9) Verify the screws are tightened and pull open the rack. (10) We recommend you try the rack with minimum weight to ensure proper instalation. www.aero-w.com Folding Clothes Line Rack Maximum Space *not included