PAINTING of TILING
Anuncio
PAINTING of TILING PRIOR PREPARATION FINISHES SOLVENTS and CLEANING of TOOLS TILING PAINTED (In GOOD CONDITION) TILING UNPAINTED CLEAN and DEGREASE CLEAN mould, dirt or grease from the joints DRY with a clean cloth APPLY: APPLY 1 coat of primer (*): HEMPEL Yacht PolyPrimer, or HEMPEL TileGrip, or TKROM Glass Imprimación, or RESILINE Base HEMPEL Poly Enamel (for finishes in WHITE or colour stains in the desired colour with HEMPEL Stainometric System) CLEAN and DEGREASE or DRY with a clean cloth TKROM Glass (stained in the chosen colour with TKROM Stainometric System) APPLY 1 coat of primer (*): HEMPEL Yacht PolyPrimer, or HEMPEL TileGrip, or TKROM Glass Imprimación, or RESILINE Base TILING PAINTED (In BAD CONDITION) REMOVE the old paint with TKROM Decapante Líquido CLEAN left over paint stripper with TKROM Disolvente 301 Sintéticos y Grasos and REMOVE dust DRY with a clean cloth APPLY 1 coat of primer (*): HEMPEL Yacht PolyPrimer, or HEMPEL TileGrip, or TKROM Glass Imprimación, or RESILINE Base TKROM Disolvente 301 Sintéticos y Grasos (for prior preparation and for BRUGUER “Cocinas y Baños”) TKROM Disolvente 310 Poliuretano (HEMPEL Yacht PolyPrimer, HEMPEL Poly Enamel and TKROM Glass) or RESILINE Acabado (in different RESILINE Card colours) TKROM Disolvente 370 Epoxi (HEMPEL TileGrip) or BRUGUER “Cocinas y Baños” (*) (staining only in pastel colours) (this product may be applied directly and does not require a 1st coat of primer) WATER (RESILINE) SAP – 11 - ENG
